Transcript
C o n n e c t i v i t y D e v i c e f o r T e c h n o l o g y
Core Technology for Device Connectivity UART Controller Se ria lC om mu ni ca tio n
● SB16C554A....................... 7- 1 ● SB16C1054........................ 7- 3 ● SB16C1058........................ 7- 5 Ex pe rt s
Syst
PCI Controller ● SB4002A.......................... 7- 7
emB
ase
!
C o r e
Semiconductor
● SB16C1052PCI...................7- 9 ● SB16C1053APCI...............7-11 ● SB16C1054PCI................. 7-15 ● SB16C1058PCI................. 7-17 PCI Express Controller ● SB5001A......................... 7-19 ● SB16C1153PCIe............... 7-21 ● SB16C1154PCIe............... 7-25 ● SB16C1158PCIe............... 7-27 Sales :
[email protected] Technical Support : www.solvline.com
Semiconductor
SB16C554A
INDUSTRIAL CONNECTIVITY
Block Diagram
SB16C554A
SB16C554A
Quad UART with 16-Byte TX/RX FIFOs
D[7:0] IOR# / IOW# RESET
TXD0
A[2:0] CS#[3:0] RXD0
RTS0# / DTR0# CTS0# / DSR0# / DCD0# / RI0#
INT[3:0] TXRDY# / RXRDY#
» Main Features
UART 0 TXD1 RXD1 RTS1# / DTR1# CTS1# / DSR1# / DCD1# / RI1# TXD2 RXD2 RTS2# / DTR2# CTS2# / DSR2# / DCD2# / RI2#
16 Byte Tx/Rx FIFO ● Maximum Transfer Rate: 5.3Mbps ● HW Flow Control (Auto-RTS and Auto-CTS) ● Pin-to-pin compatible with TI TL16C554A ●
TXD3 RXD3 RTS3# / DTR3# CTS3# / DSR3# / DCD3# / RI3#
XTAL 1 XTAL2
Overview • Integrated Four Improved SB16C550A UART
Application
• Built-in 16 Byte Transmit, Receive FIFO
• False Start Bit Detection and Generates or Detects Line Break
• Independent Control of Transmit, Receive, Modem Status, Data Interrupt
• Internal Diagnostic: Loopback Controls for Communication Link Fault Isolation
• Able to Program the Communication Speed with internal x16 Clock
• Prioritized Interrupt System Control
• Modem Control Functions (RTS#, CTS#, DTR#, DSR#, DCD# and RI#) • Programmable Serial Interface
• Programmable Auto-RTS# and Auto-CTS# - CTS# Controls Transmitter in Auto-CTS# Mode - RX FIFO Contents and Threshold Control RTS# in AutoRTS# Mode
- 5, 6, 7 or 8 bit Characters
• 3.3V Operation (5V Input Tolerance)
- Even, Odd, No Parity Bit
• 80-pin TQFP, 68-pin PLCC, 64-pin TQFP and 68-pin QFN Packages
- 1, 1.5, 2 Stop Bit (When it is larger than 1.5 stop bit, it will check for the first stop bit only.)
• Serial Multi-port RS-232/RS-422/RS-485 Card • Remote Access Server (PSTN) • Factory Automation and Process Control
• Ethernet Network to Serial Port • Network Management (Console Server) • POS (Point-of-Sale) System
Ordering Information Ordering Information
Part Number Package Operating Temperature
SB16C554A-TQ
SB16C554A-LQ
SB16C554A-PL
SB16C554A-FN
80-pin TQFP
64-pin LQFP
68-pin PLCC
68-pin QFN
-20 ~ 85˚C
-20 ~ 85˚C
-20 ~ 85˚C
-20~85˚C
Sales :
[email protected] Technical Support : www.solvline.com
7-1
SYSTEMBASE CO., LTD.
www.sbchip.com
7-2
Semiconductor
SB16C1054
INDUSTRIAL CONNECTIVITY
Block Diagram
SB16C1054
SB16C1054
Quad UART with 256-Byte TX/RX FIFOs
D[7:0] IOR# / IOW# RESET
TXD0
A[2:0] CS#[3:0] RXD0
RTS0# / DTR0# CTS0# / DSR0# / DCD0# / RI0# TXRDY0# / RXRDY0# INT[3:0] TXRDY# / RXRDY#
» Main Features
UART 0
TXD1 RXD1 RTS1# / DTR1# CTS1# / DSR1# / DCD1# / RI1# TXRDY1# / RXRDY1#
our SB16C1050 UART Core with 256 Byte Tx/Rx FIFO F Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control ● Maximum Transfer Rate: 5.3Mbps ● Supports Global Interrupt and able to Process Interrupt Vector ● HW, SW Flow Control (Auto-RTS, Auto-CTS and Xon/Xoff) ● Pin-to-pin compatible with TI TL16C554A ●
TXD2 RXD2 RTS2# / DTR2# CTS2# / DSR2# / DCD2# / RI2# TXRDY2# / RXRDY2#
●
TXD3 RXD3 RTS3# / DTR3# CTS3# / DSR3# / DCD3# / RI3# TXRDY3# / RXRDY3#
XTAL 1
Overview • Four Independent UART with 256 Byte Tx/Rx FIFO • Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control • Register Set Compatible with 16C550 and 16C650 • Maximum Transfer Rate: 5.3Mbps • Supports Xoff re-transmit and Xon-any character • Sleep mode (low operating current) • Programmable Serial Interface to Control the Serial Data Frame - 5, 6, 7 or 8 bit Characters
XTAL2
CLKSEL
Application • False Start Bit Detection and Generates or Detects Line Break • Internal Diagnostic: Loopback Controls for Communication Link Fault Isolation • Modem Control Functions (RTS#, CTS#, DTR#, DSR#, DCD# and RI#) • Prioritized Interrupt System Control • Bus Response Time: 24ns • 3.3V Operation (5V Input Tolerance) • 80-pin TQFP, 68-pin PLCC Packages
• Serial Multi-port RS-232/RS-422/RS-485 Card • Remote Access Server (PSTN) • Factory Automation and Process Control
• Ethernet Network to Serial Port • Network Management (Console Server) • POS (Point-of-Sale) System
Ordering Information Ordering Information
Part Number
- Even, Odd, No Parity Bit
Package
- 1, 1.5, 2 Stop Bit (When it is larger than 1.5 stop bit, it will check for the first stop bit only.)
Operating Temperature
SB16C1054-TQ
SB16C1054-PL
80-pin TQFP
68-pin PLCC
-40 ~ 85˚C
-40 ~ 85˚C Sales :
[email protected] Technical Support : www.solvline.com
7-3
SYSTEMBASE CO., LTD.
www.sbchip.com
7-4
Semiconductor
SB16C1058
INDUSTRIAL CONNECTIVITY
Block Diagram
SB16C1058 SB16C1058
Octal UART with 256-Byte TX/RX FIFOs
D[7:0] nIOR# / nIOW# RESET
TXD0
A[7:0] nCS#, nUART, nOPT RXD0
RTS0# / DTR0# CTS0# / DSR0# / DCD0# / RI0# TXRDY0# / RXRDY0#
INT TXRDY# / RXRDY#
» Main Features
UART 0 TXD1 RXD1 RTS1# / DTR1# CTS1# / DSR1# / DCD1# TXRDY1# / RXRDY1# TXD2 RXD2 RTS2# / DTR2# CTS2# / DSR2# / DCD2# TXRDY2# / RXRDY2# TXD3 RXD3 RTS3# / DTR3# CTS3# / DSR3# / DCD3# TXRDY3# / RXRDY3# TXD4 RXD4 RTS4# / DTR4# CTS4# / DSR4# / DCD4# TXRDY4# / RXRDY4# TXD5 RXD5 RTS5# / DTR5# CTS5# / DSR5# / DCD5# TXRDY5# / RXRDY5# TXD6 RXD6 RTS6# / DTR6# CTS6# / DSR6# / DCD6# TXRDY6# / RXRDY6# TXD7 RXD7 RTS7# / DTR7# CTS7# / DSR7# / DCD7# TXRDY7# / RXRDY7#
ight SB16C1050 UART Core with 256 Byte Tx/Rx FIFO E ● Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control ● Maximum Transfer Rate: 5.3Mbps ● Supports Global Interrupt and able to Process Interrupt Vectors ● HW, SW Flow Control (Auto-RTS, Auto-CTS and Xon/Xoff) ● Expandable up to 32 ports without any Glue Logics in the MIO Bus ●
Overview • Eight Independent UART with 256 Byte Tx/Rx FIFO • Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control • Maximum Transfer Rate: 5.3Mbps • Provides MIO Bus Interface that is Expandable up to 32 ports without any Glue Logics • HW, SW Flow Control (Auto-RTS, Auto-CTS and Xon/Xoff) • Supports Global Interrupt which Gathers Interrupts from 8 Channels
• Fast Service using Global Interrupt and Interrupt Vector Processing (mask/poll) • Supports Xoff re-transmit and Xon-any character • Bus Response Time: 24ns • Sleep mode (low operating current) • 3.3V Operation (5V Input Tolerance) • 128-pin TQFP (20 x 20 body) Package
XTAL 1
XTAL2
/ RI1#
/ RI2#
/ RI3#
/ RI4#
/ RI5#
/ RI6#
/ RI7#
CLKSEL
Ordering Information Ordering Information
Application • Serial Multi-port RS-232/RS-422/RS-485 Card • Remote Access Server (PSTN) • Factory Automation and Process Control
• Ethernet Network to Serial Port • Network Management (Console Server) • POS (Point-of-Sale) System
Part Number
SB16C1058-TQ
Package
128-pin TQFP (20 x 20)
Operating Temperature
-40 ~ 85˚C Sales :
[email protected] Technical Support : www.solvline.com
7-5
SYSTEMBASE CO., LTD.
www.sbchip.com
7-6
Semiconductor
INDUSTRIAL CONNECTIVITY
SB4002A
Block Diagram
SB4002A SB4002A
PCI to Local Bus Bridge Controller PCI Bus
Local Bus
» Main Features Connects Local Legacy Bus and PCI Bus Supports 33/66MHz PCI 32 bit Bus ● Supports ISA like Local Legacy Bus (Maximum Transaction Speed 66MHz) ● Supports Maximum 264MB/s PCI Burst Transfer ● Supports CompactPCI, and CompactPCI Hot Swap ● ●
Overview • PCI Local Bus Specification 2.3 Compliant • Supports PCI Burst Transfer 32 bit at 66MHz (Maximum 264MB/s) • Support ISA like Local Legacy Bus (Maximum Transaction Speed 66MHz) • Selectable Data Width (8/16/32 bits) and Little/Big Endian at the Legacy Bus • Supports PCI Power Management 1.1 • Supports CompactPCI, and CompactPCI Hot Swap • Supports 5 PCI to Local Address Spaces (Memory or I/O Selectable)
• Provides Chip Select and Interrupt Lines at each 5 Addresses • Capable of Controlling the Read/Write Timing of the Local Bus • Supports the Delayed Read/Write by using a FIFO • Downloads the Configuration Header Data from the External Serial ROM • E lectrically Compatible I/O pins with PCI Local Bus Specification v3.0 • 3.3V Operation (5V Input Tolerance) • 176-pin TQFP Package
Ordering Information Ordering Information
Application • PCI Target Adapter Card • Analog and Digital IO Card • Storage Card
• Data Control Card • Serial Multi-port and Serial Mode Card
Part Number
SB4002A-TQ
Package
176-pin TQFP
Operating Temperature
-40 ~ 85˚C Sales :
[email protected] Technical Support : www.solvline.com
7-7
SYSTEMBASE CO., LTD.
www.sbchip.com
7-8
Semiconductor
SB16C1052PCI
INDUSTRIAL CONNECTIVITY
Block Diagram
SB16C1052PCI
PCI BUS 32-bit, 33/66MHz
PCI to Dual-UART with 256-Byte FIFO Bridge Controller
Serial I/O & Modem Interface
SB16C1052PCI
TXD0 RXD0 RTS0# CTS0# DTR0# DSR0# DCD0# RI0#
TXD1 RXD1 RTS1# CTS1# DTR1# DSR1# DCD1# RI1#
PCI BUS SIGNAL
» Main Features Two SB16C1050 UART Core with 256 Byte Tx/Rx FIFO ● PCI Local Bus Specification 2.3 Compliant ● Supports 33/66MHz PCI 32 bit Bus ● Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control ● HW, SW Flow Control (Auto-RTS, Auto-CTS and Xon/Xoff) ●
Overview PCI Interface • PCI Local Bus Specification 2.3 Compliant • Built-in PCI Target Controller • Supports 33/66MHz PCI 32 bit Bus • E lectrically Compatible I/O pins with PCI Local Bus Specification v3.0 • Option Register Provided to Control and gather Information from UART • Downloads the Configuration Header Data from the External Serial ROM
• HW, SW Flow Control (Auto-RTS, Auto-CTS and Xon/Xoff) • Supports Xoff re-transmit and Xon-any character • Internal Diagnostic: Loopback Controls for Communication Link Fault Isolation
Serial 1-port Card
Others
Serial 2-port Card
• 3.3V Operation (5V Input Tolerance) • 128-pin TQFP Package
C O N
Ordering Information Part Number
SB16C1052PCI-TQ
Package
128-pin TQFP
Operating Temperature
-40 ~ 85˚C
C O N
1-port Serial Signals
Ordering Information
UART Interface • Two SB16C1050 UART Core with 256 Byte Tx/Rx FIFO • Register Set Compatible with 16C550 and 16C650 • Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control • S erial Data Rate: Maximum 5.3Mbps (System Clock: Maximum 85MHz)
Application
SB16C1052PCI
32-bit PCI Local Bus, 66/33MHz
C O N
2-port Serial Signals
SB16C1052PCI
32-bit PCI Local Bus, 66/33MHz
Sales :
[email protected] Technical Support : www.solvline.com
7-9
SYSTEMBASE CO., LTD.
www.sbchip.com
7-10
Semiconductor
SB16C1053APCI
INDUSTRIAL CONNECTIVITY
Block Diagram
SB16C1053APCI PCI to Dual-UART and Single-Parallel with MIO Bus Bridge Controller
PCI BUS 32-bit, 33/66MHz
SB16C1053APCI
Serial Interface
1’ST 16C1050A
Multi-Port I/O BUS Controller
» Main Features Built-In two improved UART with 256 Byte FIFO and 9-bit Communication Maximum Serial Speed: 921.6Kbps ● Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control ● One IEEE 1284 Compliant Parallel Port ● SPP/Nibble/Byte/EPP/ECP modes in Parallel Port ● 3.3V Operation ●
PCI BUS SIGNAL
●
PCI BUS Interface Controller
OPTION REGISTER
PCI Interface • PCI Local Bus Specification 2.3 Compliant • Supports 33/66MHz PCI 32 bit Bus • Supports PCI Power Management 1.2 • Supports CompactPCI, and CompactPCI Hot Swap • Downloads the Configuration Header Data from the External Serial ROM • E lectrically Compatible I/O pins with PCI Local Bus Specification v3.0
UART Interface • Two SB16C1050 UART Core with 256 Byte Tx/Rx FIFO • Adopted SB16C1050A, Enhanced Version of SB16C1050 • Register Set Compatible with 16C550 and 16C650 • Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control • S erial Data Rate: Maximum 5.3Mbps (System Clock: Maximum 85MHz)
PCI Configuration Header
PCI Power Management Controller
PCI Hot Swap Controller
Parallel Interface
Parallet Port
Parallet Port
Overview
Serial Interface
2’ST 16C1050A
Serial EEPROM Controller
MIO Bus Interface
Serial EEPROM
• Supports 9 bit Data (Multi-drop with Auto Address Detection) • HW, SW Flow Control (Auto-RTS, Auto-CTS and Xon/Xoff) • Supports Xoff re-transmit and Xon-any character • Internal Diagnostic: Loopback Controls for Communication Link Fault Isolation
Parallel Interface • Support IEEE 1284 Standard Protocol • Support Compatibility Mode, Nibble Mode, Byte Mode, EPP Mode and ECP Modes • 16 Byte FIFO for SPP/ECP mode • 8 -bit Legacy Local Bus can be used for Four External Serial Ports instead of Parallel Port
Others • 3.3V Operation (5V Input Tolerance) • Industrial Grade Operating Temperature: -40 ~ 85°C • 128-pin TQFP Package
Ordering Information Ordering Information
Part Number
SB16C1053APCI-TQ
Package
128-pin TQFP
Operating Temperature
-40 ~ 85˚C Sales :
[email protected] Technical Support : www.solvline.com
7-11
SYSTEMBASE CO., LTD.
www.sbchip.com
7-12
Semiconductor
SB16C1053APCI
Application
INDUSTRIAL CONNECTIVITY
Application
Serial 1-port (1S)
Parallel 1-port (1P)
Serial 2-port (2S)
Serial 4-port (4S)
Serial 2-port and Parallel 1-port (2S 1P)
Serial 6-port (6S)
Sales :
[email protected] Technical Support : www.solvline.com
7-13
SYSTEMBASE CO., LTD.
www.sbchip.com
7-14
Semiconductor
SB16C1054PCI
INDUSTRIAL CONNECTIVITY
Block Diagram
SB16C1054PCI
PCI BUS 32-bit, 33/66MHz
PCI to Quad-UART with 256-Byte FIFO Bridge Controller
Serial I/O & Modem Interface
SB16C1054PCI
PCI BUS SIGNAL
RXEN0# TXEN0 TXD1 RXD1 RTS0# CTS0# DTR0# DSR0# DCD0# RI0# 2nd Serial Interfaces 3rd Serial Interfaces 4th Serial Interfaces
» Main Features Four SB16C1050 UART Core with 256 Byte Tx/Rx FIFO PCI Local Bus Specification 2.3 Compliant ● Supports 33/66MHz PCI 32 bit Bus ● Zero-Wait PCI Conversion and 24ns UART Response Time for IOR and IOW ● Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control ● ●
Overview PCI Interface • PCI Local Bus Specification 2.3 Compliant • Built-in PCI Target Controller • Supports 33/66MHz PCI 32 bit Bus • Zero-Wait PCI Conversion and 24ns UART Response Time for IOR and IOW • E lectrically Compatible I/O pins with PCI Local Bus Specification v3.0 • Option Register Provided to Control and gather Information from UART • Downloads the Configuration Header Data from the External Serial ROM
UART Interface • Four SB16C1050 UART Core with 256 Byte Tx/Rx FIFO • Register Set Compatible with 16C550 and 16C650 • Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control
•S erial Data Rate: Maximum 5.3Mbps (System Clock: Maximum 85MHz) • HW, SW Flow Control (Auto-RTS, Auto-CTS and Xon/Xoff) • Supports Xoff re-transmit and Xon-any character • Internal Diagnostic: Loopback Controls for Communication Link Fault Isolation
Application Serial 4-port Card
Others 4-port Serial Signals
• 3.3V Operation (5V Input Tolerance) • 144-pin TQFP Package C O
Ordering Information
N
SB16C1054PCI
Ordering Information Part Number
SB16C1054PCI-TQ
Package
144-pin TQFP
Operating Temperature
-40 ~ 85˚C
32-bit PCI Local Bus, 66/33MHz Sales :
[email protected] Technical Support : www.solvline.com
7-15
SYSTEMBASE CO., LTD.
www.sbchip.com
7-16
Semiconductor
SB16C1058PCI
INDUSTRIAL CONNECTIVITY
Block Diagram
SB16C1058PCI
PCI BUS 32-bit, 33/66MHz
PCI to Octal-UART with 256-Byte FIFO Bridge Controller
Serial I/O & Modem Interface
SB16C1058PCI
RXEN0# TXEN0 TXD1 RXD1 RTS0# CTS0# DTR0# DSR0# DCD0# RI0# 2nd Serial Interfaces 3rd Serial Interfaces 4th Serial Interfaces
PCI BUS SIGNAL
5th Serial Interfaces 6th Serial Interfaces 7th Serial Interfaces 8th Serial Interfaces
» Main Features Eight SB16C1050 UART Core with 256 Byte Tx/Rx FIFO ● PCI Local Bus Specification 2.3 Compliant ● Supports 33/66MHz PCI 32 bit Bus ● Zero-Wait PCI Conversion and 24ns UART Response Time for IOR and IOW ● Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control ●
Overview PCI Interface • PCI Local Bus Specification 2.3 Compliant • Built-in PCI Target Controller • Supports 33/66MHz PCI 32 bit Bus • Zero-Wait PCI Conversion and 24ns UART Response Time for IOR and IOW • E lectrically Compatible I/O pins with PCI Local Bus Specification v3.0 • Option Register Provided to Control and gather Information from UART • Downloads the Configuration Header Data from the External Serial ROM
UART Interface • Eight SB16C1050 UART Core with 256 Byte Tx/Rx FIFO • Register Set Compatible with 16C550 and 16C650 • Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control
•S erial Data Rate: Maximum 5.3Mbps (System Clock: Maximum 85MHz) • HW, SW Flow Control (Auto-RTS, Auto-CTS and Xon/Xoff) • Supports Xoff re-transmit and Xon-any character • Internal Diagnostic: Loopback Controls for Communication Link Fault Isolation
Application Serial 8-port Card
Others • 3.3V Operation (5V Input Tolerance) • 176-pin TQFP Package
8-port Serial Signals
C
Ordering Information
O N
Ordering Information Part Number
SB16C1058PCI-TQ
Package
176-pin TQFP
Operating Temperature
-40 ~ 85˚C
SB16C1058PCI
32-bit PCI Local Bus, 66/33MHz Sales :
[email protected] Technical Support : www.solvline.com
7-17
SYSTEMBASE CO., LTD.
www.sbchip.com
7-18
Semiconductor
INDUSTRIAL CONNECTIVITY
SB5001A
SB5001A
Block Diagram
SB5001A
PCI Express to MIO Bus Bridge Controller
PCI Express BUS
MIO Bus Signals
» Main Features Built-in PCI Express PHY (2.5Gbps) ● Expandable up to 32 Serial Ports using MIO Bus ● Can be used to Design 8/16/24/32 ports Serial Card ●
Application
Serial 32-port Card Transceiver
Transceiver
SB16C1058 MIO BUS
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
SB16C1058 MIO BUS
SB16C1058 MIO BUS
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Ordering Information
Transceiver
Transceiver
Transceiver
SB16C1058
Transceiver
Transceiver
Transceiver
Transceiver
SB5001A
Transceiver
Ordering Information SB5001A
MIO MIO BUS BUS
SB16C1058
MIO MIO BUS BUS
SB16C1058
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
Transceiver
-40 ~ 125˚C
SB16C1058
Transceiver
Operating Temperature
PCI Express
MIO BUS
Transceiver
128-pin TQFP
Transceiver
Package
Transceiver
SB5001A-TQ
SB16C1058
Transceiver
Part Number
MIO MIO BUS BUS
Transceiver
• Best Performance with 8/16/32 bit Accessible TX/RX FIFO Register by Legacy Burst Mode • Support 8 bit MIO Bus • Support 4 Chip Select and 4 Interrupt Request • Four Panels can be attached to MIO Bus. (each panel consisting 8 serial ports)
PCI Express
Transceiver
MIO Bus Interface
• 3.3V Operation (5V Input Tolerance) • Industrial Grade Operating Temperature: -40 ~ 85°C • 128-pin TQFP Package
Transceiver
•S tandard PCI Express Specification Rev. 1.1/2.0/3.0 Compliant • Built-In 2.5Gbps PCI Express PHY • PCI Power Management Specification Rev. 1.2 Compliant • Support MSI and ASPM Link Power Management • Downloads the Configuration Header Data from External Serial EEPROM
Others
Transceiver
PCI Interface
Transceiver
Overview
Sales :
[email protected] Technical Support : www.solvline.com
7-19
SYSTEMBASE CO., LTD.
www.sbchip.com
7-20
Semiconductor
Others • Core 1.2V, IO 3.3V Operation (5V Input Tolerance) • Industrial Grade Operating Temperature: -40 ~ 125°C • 128-pin TQFP Package
SB16C1153PCIe PCI Express to Dual-UART, Single-Parallel with MIO Bus Bridge Controller
Maximum 256-byte PCI Express Burst Read/ Write for Serial Dump ● Built-In PCI Express PHY 2.5Gbps ● Built-In Two Improved UART Core, SB16C1150 with 256-byte (64 x 4 way) FIFO ● Built-In IEEE1284 Compliant One Parallel Port ● 8-bit MIO Bus for Serial Expansion
Ordering Information
Ordering Information Part Number
SB16C1153PCIe-TQ
Package
128-pin TQFP
Operating Temperature
-40 ~ 125˚C
Block Diagram
» Main Features ●
Supports 9 bit Data (Multi-drop with Auto Address Detection) Patented! ● Non-redundant Internal Registry allows Inefficient Access or Process ● Best Performance with 8/16/32 bit Accessible TX/RX FIFO Register by Legacy Burst Mode ●
SB16C1153PCIe Serial Port Signals
PCI Express BUS
Serial Port Signals
Parallel Port Signals
Overview PCI Express Interface • S tandard PCI Express Specification Rev. 1.1/2.0/3.0 Compliant • Maximum 256-byte PCI Express Burst Read/Write for Serial Dump • Built-In PCI Express PHY 2.5Gbps • Supports PCI Power Management 1.2 • Support MSI and ASPM Link Power Management • Downloads the Configuration Header Data from the External Serial ROM
UART Interface • Two SB16C1150 UART Core with 256 Byte (64 x 4 Byte) Tx/ Rx FIFO • Non-redundant Internal Registry allows Inefficient Access or Process • 256 Byte (4-block x 64-byte) Transmit/Receive FIFO
SB16C1153PCIe
INDUSTRIAL CONNECTIVITY
• Best Performance with 8/16/32 bit Accessible TX/RX FIFO Register by Legacy Burst Mode • Supports 9 bit Data (Multi-drop with Auto Address Detection) Patented! • Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control • HW, SW Flow Control (Auto-RTS, Auto-CTS and Xon/Xoff) • Supports Xoff re-transmit and Xon-any character • Infrared (IrDA 1.1) Data Encoder/Decoder
MIO Bus Signals
Parallel Interface • Support Compatibility Mode, Nibble Mode, Byte Mode, EPP Mode and ECP Modes • 16 Byte FIFO for SPP/ECP mode • With MIO Bus, Four External Serial Ports can be used instead of Parallel Port
Sales :
[email protected] Technical Support : www.solvline.com
7-21
SYSTEMBASE CO., LTD.
www.sbchip.com
7-22
Semiconductor
SB16C1153PCIe
Application
INDUSTRIAL CONNECTIVITY
Application
Serial 1-port Card (1S)
Parallel 1-port Card (1P)
Serial 2-port Card (2S)
Serial 4-port Card (4S)
Serial 2-port & Parallel 1-port Card (2S1P)
Serial 6-port Card (6S)
Sales :
[email protected] Technical Support : www.solvline.com
7-23
SYSTEMBASE CO., LTD.
www.sbchip.com
7-24
Semiconductor
SB16C1154PCIe
INDUSTRIAL CONNECTIVITY
Block Diagram
SB16C1154PCIe PCI Express to Quad-UART with 256-byte FIFO Bridge Controller
SB16C1154PCIe Serial Port Signals
Serial Port Signals PCI Express BUS Serial Port Signals
Serial Port Signals
» Main Features Maximum 256 byte PCI Express Burst Read/ Write for Serial Dump ● Built-In PCI Express PHY 2.5Gbps ● Built-In Four Improved UART Core, SB16C1150 with 256 byte (64 x 4 way) FIFO ● Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control ●
Overview
Best Performance with 8/16/32 bit Accessible TX/RX FIFO Register by Legacy Burst Mode ● Supports 9 bit Data (Multi-drop with Auto Address Detection) Patented! ● Non-redundant Internal Registry allows Inefficient Access or Process ●
• Supports Xoff re-transmit and Xon-any character • Infrared (IrDA 1.1) Data Encoder/Decoder
PCI Express Interface
Parallel Interface
• Standard PCI Express Specification Rev. 1.1/2.0/3.0 Compliant • Maximum 256 byte PCI Express Burst Read/Write for Serial Dump • Built-In PCI Express PHY 2.5Gbps • Supports PCI Power Management 1.2 • Support MSI and ASPM Link Power Management • Downloads the Configuration Header Data from the External Serial ROM
• Support Compatibility Mode, Nibble Mode, Byte Mode, EPP Mode and ECP Modes • 16 Byte FIFO for SPP/ECP mode • With MIO Bus, Four External Serial Ports can be used instead of Parallel Port
UART Interface • Four SB16C1150 UART Core with 256 Byte (64 x 4 Byte) Tx/ Rx FIFO • Non-redundant Internal Registry allows Inefficient Access or Process • 256 Byte (4-block x 64-byte) Transmit/Receive FIFO • 8/16/32 bit Accessible UART Core with 256 Byte Burst Accessible Bus • Supports 9 bit Data (Multi-drop with Auto Address Detection) Patented! • Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control • HW, SW Flow Control (Auto-RTS, Auto-CTS and Xon/Xoff)
Application Serial 4-port Card
Others • Core 1.2V, IO 3.3V Operation (5V Input Tolerance) • Industrial Grade Operating Temperature: -40 ~ 125°C • 144-pin TQFP Package
SB16C1154PCIe
Ordering Information
Ordering Information Part Number
SB16C1154PCIe-TQ
Package
144-pin TQFP
Operating Temperature
-40 ~ 125˚C
PCI Express Sales :
[email protected] Technical Support : www.solvline.com
7-25
SYSTEMBASE CO., LTD.
www.sbchip.com
7-26
Semiconductor
SB16C1158PCIe
INDUSTRIAL CONNECTIVITY
Block Diagram
SB16C1158PCIe PCI Express to Octal-UART with 256-byte FIFO Bridge Controller
SB16C1158PCIe Serial Port Signals Serial Port Signals PCI Express BUS
Serial Port Signals Serial Port Signals
» Main Features Maximum 256 byte PCI Express Burst Read/ Write for Serial Dump ● Built-In PCI Express PHY 2.5Gbps ● Built-In Eight Improved UART Core, SB16C1150 with 256 byte (64 x 4 way) FIFO ● Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control ●
Overview
Serial Port Signals Serial Port Signals
Best Performance with 8/16/32 bit Accessible TX/RX FIFO Register by Legacy Burst Mode ● Supports 9 bit Data (Multi-drop with Auto Address Detection) Patented! ● Non-redundant Internal Registry allows Inefficient Access or Process ●
Parallel Interface
•S tandard PCI Express Specification Rev. 1.1/2.0/3.0 Compliant • Maximum 256 byte PCI Express Burst Read/Write for Serial Dump • Built-In PCI Express PHY 2.5Gbps • Supports PCI Power Management 1.2 • Support MSI and ASPM Link Power Management • Downloads the Configuration Header Data from the External Serial ROM
• Support Compatibility Mode, Nibble Mode, Byte Mode, EPP Mode and ECP Modes • 16 byte FIFO for SPP/ECP mode • With MIO Bus, Four External Serial Ports can be used instead of Parallel Port
• Eight SB16C1150 UART Core with 256 byte (64 x 4 Byte) Tx/ Rx FIFO • Non-redundant Internal Registry allows Inefficient Access or Process • 256 byte (4-block x 64-byte) Transmit/Receive FIFO • 8/16/32 bit Accessible UART Core with 256 byte Burst Accessible Bus • Supports 9 bit Data (Multi-drop with Auto Address Detection) Patented! • Provides Auto Toggling Function for RS422 and RS485 Bus Auto Control • HW, SW Flow Control (Auto-RTS, Auto-CTS and Xon/Xoff)
Serial Port Signals
• Supports Xoff re-transmit and Xon-any character • Infrared (IrDA 1.1) Data Encoder/Decoder
PCI Express Interface
UART Interface
Serial Port Signals
Application Serial 8-port Card
Others • Core 1.2V, IO 3.3V Operation (5V Input Tolerance) • Industrial Grade Operating Temperature: -40 ~ 125°C • 176-pin TQFP Package
SB16C1158PCIe
Ordering Information
Ordering Information Part Number
SB16C1158PCIe-TQ
Package
144-pin TQFP
Operating Temperature
-40 ~ 125˚C
PCI Express Sales :
[email protected] Technical Support : www.solvline.com
7-27
SYSTEMBASE CO., LTD.
www.sbchip.com
7-28
MEMO
MEMO
Office : 16F Daerung Post Tower-1, 288, Digital-ro, Guro-gu, Seoul, Korea Phone. +82-2-855-0501 Fax. +82-2-855-0580 Sales & Marketing /
[email protected] Technical Support / www.solvline.com
Office : 16F Daerung Post Tower-1, 288, Digital-ro, Guro-gu, Seoul, Korea Phone. +82-2-855-0501 Fax. +82-2-855-0580 Sales & Marketing /
[email protected] Technical Support / www.solvline.com
MEMO
Office : 16F Daerung Post Tower-1, 288, Digital-ro, Guro-gu, Seoul, Korea Phone. +82-2-855-0501 Fax. +82-2-855-0580 Sales & Marketing /
[email protected] Technical Support / www.solvline.com
