Transcript
MARK III 16 GAUGE HEAVY DUTY MOBILE SHELVING
JOB NAME: ___________________________ ITEM NO.: ____________________________ NO. REQUIRED: _______________________
DESCRIPTION: Shall be Market Forge Mark III Heavy Duty Mobile Shelving Type Number ___________________. SOLID - Stainless Steel Flat Surface □ Model HSFM
EMBOSSED - Stainless Steel 2” (51mm) Embossments with 2” (51mm) Flat Spaces □ Model HSEM
Shelves shall be ____ tier high (3 to 8) or as shown. LENGTHS:
WIDTHS:
30” (762mm)
14” (356mm)
36” (914mm)
18” (457mm)
42” (1097mm)
20” (508mm)
48” (1219mm)
24” (610mm)
54” (1372mm)
27” (686mm)
60” (1524mm)
POSTS: Shall be provided with press fit plastic caps at both top and swivel casters for the base. Posts shall be marked at 2” intervals to assist alignment of shelves during assembly. Available in the following: □ Stainless steel Available in the following lengths: □ 63” (1600mm) □ 78” (1981mm) CASTERS: □ 5” (128mm)Ø, with ball bearings, (2) with brakes, swivel casters, rated at 225 # per caster. □ 5” (128mm)Ø, heavy duty polyurethane wheels, all swivel, (2) with brakes, rated at 275 # per caster. Units shall be delivered knocked down and packages in protective cardboard containers marked with size and material contents. OPTIONAL AT EXTRA COST: □ Back Ledges. □ End Ledges. □ Revolving Rubber Bumpers.
FOOD SERVICE EQUIPMENT Mark III Mobile Shelving
SHELVES: Each shelf shall be made of solid heavy duty 16 gauge material with all four corners uniformly coped to exact contour to receive internal corner castings in crevice-free alignment. The perimeter of each shelf shall have a die-formed raised marine edge, (3mm) high on a (7mm) radius. The lower edge of the shelf perimeter shall be hemmed and pressed tight along the shelf length. Shelves shall be shipped with set screws for each corner to allow shelves to be installed or adjusted at any desired spacing. Shelf corner castings have a hole to take 1” O.D. shelf posts. Shelves shall be available as required in any combination of the following widths and lengths as designed or as shown on plans.
SPEC SHEET: R-820Q 03/11
LOUVERED - Stainless Steel 3/8” (310mm) Louvers with 2” (51mm) Embossments □ Model HSLM
The manufacturer reserves the right to modify materials and specifications without notice.
PRINTED IN U. S. A. 35 Garvey Street • Everett • MA • 02149 Tel: (617) 387-47100 • Toll Free: (866) 698-3188 • Fax: (617) 387-4456 • Outside MA Fax: (800) 227-2659 E-Mail:
[email protected] • Website: w w w . m f i i . c o m
MARK III 16 GAUGE HEAVY DUTY MOBILE SHELVING
DETAILS & DIMENSION
TYPES
MATERIAL
MODEL TYPE
Solid (Flat Surface)
Stainless Steel
HSFM
Louvered (3/8” Louvers with 2” Embossments)
Stainless Steel
HSLM
Embossed (2” Embossments with 2” Flat Spaces)
Stainless Steel
HSEM
Mark III Mobile Shelving
FOOD SERVICE EQUIPMENT
SPEC SHEET: R-820Q 03/11
AVAILABLE TYPES OF SHELVING
This Product is ETL Complaint with ANSI/NSF-2 Standard.
35 Garvey Street • Everett • MA • 02149 Tel: (617) 387-47100 • Toll Free: (866) 698-3188 • Fax: (617) 387-4456 • Outside MA Fax: (800) 227-2659 E-Mail:
[email protected] • Website: w w w . m f i i . c o m
