Transcript
®
PRODUCT FEATURES WV-CU300 SYSTEM CONTROLLER
UL ®
KEY FEATURES • Remote control of up to eight WJ-SQ508 sequential switchers • Remote control of up to 64 cameras using optional receivers and accessories
• • • •
Camera number display Data transfer via coaxial cable Up to 3 control sites Rack-mountable
SPECIFICATIONS Model # Input Spot Video In (BNC) Mic In (Composite Jack) Output Monitor Video Out (BNC) Audio Out (Phono) Audio Slave Out (BNC) In/Out Control In/Out (BNC) Control Switches Power On/Off Camera Functions Lens Functions Housing Pan/Tilt Functions Switching Functions Display Functions Audio Cable Compensation Dimensions (H x W x D)
WV-CU300 1V p-p/75 ohms, FM mixed signal -76dBV/400 ohms 1V p-p/75 ohms, compostie video signal -10dBV/1k ohm FM Signal 1V p-p/75 ohms (x3) Unit No. Shutter: On/Off, Shutter Speed Select; Sens Up Select: Sens Up Mode Select AUTO/MANUAL, Sens Up: INC/DEC, Electronic Zoom: On/Off, Electronic Zoom Position: Area Select Iris: Open/Close, Preset (Only with DC Control Lens), Focus: Far/Near, Zoom: Tele/Wide Wiper: On/Off, Defroster: On/Off, Camera: On/Off, Aux 1-2: On/Off Auto Pan: On/Off, Random Pan: On/Off; Manual Pan: Right/Left, Manual Tilt: Up/Down Sequence Start: Normal/Program, Video Select: Spot/Sequence Status Display: On/Off Talk Spot: On/Off, Talk All: On/Off S/M/L (Only for Sequential/Spot Out, Sequential/Alarm Out) 615⁄16" x 169⁄16" x 39⁄16" (176 x 420 x 90.60mm)
DIMENSIONAL DRAWING Unit: inches (mm)
ARCHITECTS’ AND ENGINEERS’ BID SPECIFICATIONS 16
The system controller shall be a Panasonic Model WV-CU300 or equivalent. The controller, when used in a system with WV-RC100 indoor and WV-RC150 outdoor receivers, shall control camera function and accessory equipment, including focus, zoom, pan and tilt and housing controls. It shall feature status display on monitor. In addition, the WV-CU300 shall control sequential switching in systems of up to 64 cameras using as many as 8 WJ-SQ508 programmable sequential switchers (optional) in a master/slave configuration. The controller shall feature bidirectional audio capability with talk spot or all-talk paging, using optional audio accessories. There shall be provision for addition of an optional microphone in the front panel. Data transmission to the WJ-MP404 data multiplex unit and the WJ-SQ508 programmable sequential switcher (both optional) is made via RG-59U coaxial cable. Unit shall feature cable compensation. Flexible design shall allow tabletop use of rack-mounting. The power source shall be 120VAC, 60Hz. The unit shall be UL listed.
206
Control Systems
