Transcript
C44 Series 03/2011
SERVICE SAW SERIES PARTS LIST C44 KUBOTA DIESEL SERIES
Kubota, Diesel Engine
Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at all times. Revision: 100 03/2011 Manual Part# 168498-PM
www.nortonconstructionproducts.com
SERVICE SAW SERIES
INTRODUCTION
Congratulations on your purchase of a C44 Series Service Saw. We are certain that you will be pleased with your purchase. Norton Clipper takes pride in producing the finest construction power tools and diamond blades in the industry. Operated correctly, your C44 Series Service Saw should provide you with years of service. In order to help you, we have included this manual. This owners manual contains information necessary to operate and maintain your C44 Series Service Saw safely and correctly. Please take the time to familiarize yourself with the C44 Series Service Saw by reading and reviewing this manual. Read and follow all safety, operating and maintenance instructions. If you should have questions concerning your C44 Series Service Saw, please feel free to call our friendly customer service department at: (254) 918-2310 Regards,
NOTE THIS INFORMATION FOR FUTURE USE: MODEL NUMBER: SERIAL NUMBER: PURCHASE PLACE: PURCHASE DATE:
2
SERVICE SAW SERIES
PARTS LIST
TABLE OF CONTENTS PAGE NO.
FIGURE 1 - PARTS LIST: C4420SS CONCRETE SAW - P/N 168498-20 4-5 FIGURE 2 - PARTS LIST: C4420SS CONCRETE SAW - P/N 168498-26 6-7 FIGURE 3 - PARTS LIST: C4420SS CONCRETE SAW - P/N 168498-30 8-9 FIGURE 4 - PARTS LIST: C4420SS CONCRETE SAW - P/N 168498-36 10-11 FIGURE 5 - PARTS LIST: C4400SD CONCRETE SAW - P/N 168498 12-13 FIGURE 6 - PARTS LIST: ASSY, ENGINE, KUBOTA, C44HP - P/N 167507 14-16 FIGURE 7 - PARTS LIST: ASSY, 7” AIR CLEANER - P/N 167509 17 FIGURE 8 - PARTS LIST: ASSY, INSTRUMENT PANEL - P/N 167222-NRT 18 FIGURE 9 - PARTS LIST: ASSY, TRANSMISSION IDLER - P/N 167666 19 FIGURE 10 - PARTS LIST: ASSY, PULLEY, TRANS. BELT, - P/N 167276 20 FIGURE 11 - PARTS LIST: ASSY, C44/48 SUB A - P/N 167197-NRT 21 FIGURE 12 - PARTS LIST: ASSY, C44/48 SUB B - P/N 167197-NRT 22-23 FIGURE 13 - PARTS LIST: ASSY, C44/48 SUB C - P/N 167197-NRT 24-25 FIGURE 14 - PARTS LIST: ASSY, C44/48 SUB D - P/N167197-NRT 26-27 FIGURE 15 - PARTS LIST: ASSY, C44/48 SUB E - P/N 167197-NRT 28-29 FIGURE 16 - PARTS LIST: ASSY, DEPTH STOP - P/N 165710 30 FIGURE 17 - PARTS LIST: ASSY, FUEL TANK - P/N 167210 31 32 FIGURE 18 - PARTS LIST: ASSY, RADIATOR - P/N 167946 FIGURE 19 - PARTS LIST: ASSY, CONTROL PANEL, LESS, INT - P/N 167215-NRT 33 FIGURE 20 - PARTS LIST: ASSY, CONTROLHEAD, FNR - P/N 167226 34 FIGURE 21 - PARTS LIST: ASSY, UP/DOWN CONTROL - P/N 167233 35 FIGURE 22 - PARTS LIST: ASSY, WATER VALVE - P/N 164161 36 FIGURE 23 - PARTS LIST: ASSY, POINTER FRONT - P/N 160931 37 FIGURE 24 - PARTS LIST: ASSY, POINTER WHEEL - P/N 165238 38 FIGURE 25 - PARTS LIST: ASSY, REAR POINTER - P/N 163824 38 FIGURE 26 - PARTS LIST: ASSY, SHAFT GUARD - P/N 166056 39 40-41 FIGURE 27 - PARTS LIST: ASSY, FRAME SUB - P/N 167294 FIGURE 28 - PARTS LIST: ASSY, BLADE SHAFT - P/N 161210 42 FIGURE 29 - PARTS LIST: TRUCK, FRONT PIVOT - P/N 165705 43 FIGURE 30 - PARTS LIST: TRANSMISSION - P/N 167198 44-45 FIGURE 31 - PARTS LIST: 20" BLADE GUARD - P/N 168279-20 46-47 FIGURE 32 - PARTS LIST: 26" BLADE GUARD - P/N 168279-26 48-49 FIGURE 33 - PARTS LIST: 30" BLADE GUARD - P/N 168279-30 50-51 FIGURE 34 - PARTS LIST: 36" BLADE GUARD - P/N 168279-36 52-53 FIGURE 35 - PARTS LIST: ASSY, WATER MANIIFOLD 2T - P/N 167624-NRT 54 FIGURE 36 - PARTS LIST: ASSY, WATER MANIIFOLD 4T - P/N 167624-NRT 54 FIGURE 37 - PARTS LIST: ASSY, HINGE - P/N 163979 55 GENERAL PRODUCT INFORMATION Contact Information and Limited Warranty
3
59
SERVICE SAW SERIES
FIGURE 1 - PARTS LIST: C4420SD CONCRETE SAW P/N 168498-20
4
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 1 - PARTS LIST: C4420SD CONCRETE SAW P/N 168498-20 PART OR QTY. REQ. IDENTIFYING NO.
ITEM NO.
DESCRIPTION
1 2
BELT, V, 3VX425 SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE
138172 151369
7 4
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
WASHER, LOCK, SPLIT, 5/16 WASHER, 5/16 SAE FLAT BELT, AX-26 TAG, SERIAL #, BLANK WASHER, 1/2 USS FLAT DRIVE SCREW, #7 X 5/16 ROUND HEAD ASSY, FLANGE, 4" INNER, LH ASSY, FLANGE, 4" INNER, RH FLANGE, 4" OUTER BUSHING, TPR-LOCK, 1615 X 1-3/8 SCREW, 1/2-13 X 1-1/2 HEX HEAD, LEFT HAND SCREW, 1/2-13 X 1-1/2 HEX FLANGE HEAD, RIGHT HAND SCREW, 3/8-16 X 1 FLATHEAD MACHINE PULLEY, 7/3VX/4.12 X 1615TB PLATE, BELT PROTECTOR CORNER, FRAME ASSY, SHAFT GUARD GUARD, ENGINE, LEFT, C44/48 SCREW, SOC HD, MI0-1.25 X 30MM PULLEY, 7/3VX/3.2 BOLT-ON GUARD, ENGINE, RIGHT, C44 ASSY, 20" BLADE GUARD C4400SD CONC SAW, PARENT LABEL, C4420SD MODEL LABEL, NORTON/CLIPPER LOGO
151747 151754 152365 157500-RW 157679 157849 160781 160782 160798 160811 160818 160819 162067 165695 165707 166056 165871 167287-NRT 167513 167517-18 167558-NRT 168279-20 168498 168545-4420 168546
4 4 1 2 2 4 1 1 1 1 1 1 4 1 1 1 1 1 6 1 1 1 1 2 4
5
SERVICE SAW SERIES
FIGURE 2 - PARTS LIST: C4426SD CONCRETE SAW P/N 168498-26
6
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 2 - PARTS LIST: C4426SD CONCRETE SAW P/N 168498-26 PART OR QTY. REQ. IDENTIFYING NO.
ITEM NO.
DESCRIPTION
1 2
BELT, V, 3VX425 SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE
138172 151369
7 4
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
WASHER, LOCK, SPLIT, 5/16 WASHER, 5/16 SAE FLAT BELT, AX-26 TAG, SERIAL #, BLANK WASHER, 1/2 USS FLAT DRIVE SCREW, #7 X 5/16 ROUND HEAD ASSY, FLANGE, 5" INNER, LH ASSY, FLANGE, 5" INNER, RH FLANGE, 5" OUTER BUSHING, TPR-LOCK, 1615 X 1-3/8 SCREW, 1/2-13 X 1-1/2 HEX HEAD, LEFT HAND SCREW, 1/2-13 X 1-1/2 HEX FLANGE HEAD, RIGHT HAND SCREW, 3/8-16 X 1 FLATHEAD MACHINE PULLEY, 7/3VX/4.12 X 1615TB PLATE, BELT PROTECTOR CORNER, FRAME ASSY, SHAFT GUARD GUARD, ENGINE, LEFT, C44/48 SCREW, SOC HD, MI0-1.25 X 30MM PULLEY, 7/3VX/3.2 BOLT-ON GUARD, ENGINE, RIGHT, C44 ASSY, 26" BLADE GUARD C4400SD CONC SAW, PARENT LABEL, C4426SD MODEL LABEL, NORTON/CLIPPER LOGO
151747 151754 152365 157500-RW 157679 157849 160783 160784 160799 160811 160818 160819 162067 165695 165707 165871 166056 167287-NRT 167513 167517-18 167558-NRT 168279-26 168498 168545-4426 168546
4 4 1 2 2 4 1 1 1 1 1 1 4 1 1 1 1 1 6 1 1 1 1 2 4
7
SERVICE SAW SERIES
FIGURE 3 - PARTS LIST: C4430SD CONCRETE SAW P/N 168498-30
8
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 3 - PARTS LIST: C4430SD CONCRETE SAW P/N 168498-30 PART OR QTY. REQ. IDENTIFYING NO.
ITEM NO.
DESCRIPTION
1 2
BELT, V, 3VX425 SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE
138172 151369
7 4
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
WASHER, LOCK, SPLIT, 5/16 WASHER, 5/16 SAE FLAT BELT, AX-26 TAG, SERIAL #, BLANK WASHER, 1/2 USS FLAT DRIVE SCREW, #7 X 5/16 ROUND HEAD ASSY, FLANGE, 5" INNER, LH ASSY, FLANGE, 5" INNER, RH FLANGE, 5" OUTER BUSHING, TPR-LOCK, 1615 X 1-3/8 SCREW, 1/2-13 X 1-1/2 HEX HEAD, LEFT HAND SCREW, 1/2-13 X 1-1/2 HEX FLANGE HEAD, RIGHT HAND SCREW, 3/8-16 X 1 FLATHEAD MACHINE PULLEY, 7/3VX/4.12 X 1615TB PLATE, BELT PROTECTOR CORNER, FRAME ASSY, SHAFT GUARD GUARD, ENGINE, LEFT, C44/48 SCREW, SOC HD, MI0-1.25 X 30MM PULLEY, 7/3VX/3.2 BOLT-ON GUARD, ENGINE, RIGHT, C44 ASSY, 30" BLADE GUARD C4400SD CONC SAW, PARENT LABEL, C4430SD MODEL LABEL, NORTON/CLIPPER LOGO
151747 151754 152365 157500-RW 157679 157849 160783 160784 160799 160811 160818 160819 162067 165695 165707 165871 166056 167287-NRT 167513 167517-18 167558-NRT 168279-30 168498 168545-4430 168546
4 4 1 2 2 4 1 1 1 1 1 1 4 1 1 1 1 1 6 1 1 1 1 2 4
9
SERVICE SAW SERIES
FIGURE 4 - PARTS LIST: C4436SD CONCRETE SAW P/N 168498-36
10
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 4 - PARTS LIST: C4436SD CONCRETE SAW P/N 168498-36 PART OR QTY. REQ. IDENTIFYING NO.
ITEM NO.
DESCRIPTION
1
SCREW, 3/8 - 16 X 1-1/4 HEX HEAD CAP
150774
2
2
WASHER, 3/8 SAE FLAT
150923
4
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
SCREW, 5/16 - 18 X 3/4 HEX HEAD MACHINE WASHER, FLAT, SPLIT, 5/16 WASHER, FLAT, SAE, 5/16 BELT, AX - 26 NUT, 3/8 - 16 NYLOK HEX TAG, SERIAL #, BLANK WASHER, 1/2 USS FLAT DRIVE SCREW, #7 X 5/16 ROUND HEAD ASSY, FLANGE, 6" INNER, LH ASSY, FLANGE, 6" INNER, RH FLANGE, 6" OUTER BUSHING, TPR-LOCK, 1615 X 1-3/8 SCREW, 1/2-13 X 1-1/2 HEX HEAD, LEFT HAND SCREW, 1/2-13 X 1-1/2 HEX FLANGE HEAD, RIGHT HAND SCREW, 3/8-16 X 1 FLATHEAD MACHINE PLATE, BELT PROTECTOR CORNER, FRAME ASSY, SHAFT GUARD PULLEY, 7/3VX/4.12 X 1615TB GUARD, ENGINE, LEFT, C44/48 SCREW, SOC HD, MI0-1.25 X 30MM PULLEY, 7/3VX/3.2 BOLT-ON BELT, V, 3VX450 GUARD, ENGINE, RIGHT, C44 ASSY, 36" BLADE GUARD C4400SD CONC SAW, PARENT LABEL, C4436SD MODEL LABEL, NORTON/CLIPPER LOGO
151369 151747 151754 152365 152505 157500-RW 157679 157849 160785 160786 160800 160811 160818 160819 162067 165707 165871 166056 165695 167287-NRT 167513 167517-18 167517 167558-NRT 168279-36 168498 168545-4436 168546
4 4 4 2 2 2 2 4 1 1 1 1 1 1 4 1 1 1 1 1 6 1
11
1 1 1 2 4
SERVICE SAW SERIES
FIGURE 5 - PARTS LIST: C4400SD CONCRETE SAW P/N 168498
12
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 5 - PARTS LIST: C4400SD CONCRETE SAW P/N 168498 ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
BELT, AX-38 NUT, HEX, 5/8-18 WASHER, 3/8 SAE FLAT
133165 135848 150923
1 3 2
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
WASHER, 1/2 SAE FLAT WASHER, 3/8 SPLIT LOCK CLAMP, 5/8 HOSE NUT, 1/2-13 HEX NUT, 1/4-20 HEX SCREW, HEX HD CAP, 3/8-16 X 1 WASHER, 1/4 SPLIT LOCK SCREW, 1/4-20 X 1/2 HEX HEAD WASHER, 1/2 SPLIT LOCK NUT, HEX, 8-32 SPRING, 9/16 X 2.5 EXTENSION SCREW, 1/2-13 X 1-3/4 HEX HEAD CAP EYEBOLT, 1/4-20 X 2 SCREW, 1/4-20 X 1/2 PAN HEAD PHILLIPS MACHINE WASHER, FLAT, 5/8 SAE NUT, 1/4-20 NYLOK ELBOW, 1/4MNPTx 1/4 BARB, 90 DEG BLOCK, 5-SLOT FUSE SCREW, 8-32 X 3/4 SOCKET HEAD CAP FUSE, 40A ATC BLADE FUSE, 20A ATC BLADE FUSE, lOA ATC BLADE FUSE, 5A ATC BLADE ASSY, C44/48 SUB NECK, 2" FUEL FILLER CAP, 2" FUEL FILLER ASSY, INSTRUMENT PANEL SCREW, HEX, TAP, 5/8-11 X 5-1/2 SWITCH, MAGNETIC, 12/24V, MDL117 ASSY, ENGINE, KUBOTA 44HP BRACKET, FUSEBOX, KB HOSE, RADIATOR, 1-1/4ID, UPPER, KB HOSE, RADIATOR, 1-1/4ID, LOWER, KB CLAMP, 1 - 1/ 16 TO 2 HOSE ASSY, TRANS IDLER, KB WI RE HARNESS, KB HOSE, FUEL, 3/161D (6.0')
150924 150925 151198 151282 151893 152507 152591 152608 153524 153549 153807 153853 153887 157523 158350 159857 162637 163937 164594 164595 164596 164597 164598 167197-NRT 167219-D 167220 167222-NRT 167279 167502 167507 167536 167559 167560 167617 167666 167672 167674
8 2 3 4 2 2 6 6 4 2 1 4 1 3 4 1 1 1 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 4 1 1 1
13
SERVICE SAW SERIES
FIGURE 6 - PARTS LIST: ASSY, ENGINE, KUBOTA 44HP P/N 167507
14
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 6 - PARTS LIST: ASSY, ENGINE, KUBOTA 44HP P/N 167507
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
NUT, HEX, 5/16-18 WHEEL, CONVEYOR CART CLAMP, 5/8 HOSE
101196 133090 151198
1 1 5
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
SCREW, 5/16-18 X 3/4 SCREW, 5/16-18 X 1 WASHER, LOCK, SPLIT, 5/16 WASHER, 5/16 SAE FLAT NUT, 1/4-20 HEX WASHER, 1/4 SAE FLAT SCREW, SOC HD , 5/16 - 18 X 3/4 PIN, 1/16 X 3/4 COTTER SCREW, 1/4-20 X 3/4 SOCKET HEAD CAP SCREW, HEX HD CAP, 1/4-20 X 1 PIN, WIRE STOP NUT, HEX tw, 1/4-20 SCREW, HEX HD FL 10-24X 5/16 BUMPER, 1-1/2 OD X I/4 ID x 3/4 SCREW, PAN HEAD 1/4-20 X 1/2 NUT, 5/16-18 NYLOK HEX NUT, 1/4-20 NYLOK WASHER, FLAT, N, MIO CLAMP, 1-5/16 TO 2-1/4 HOSE SCREW, HEX, M8-1.25 X 16MM CLAMP, 30 SERIES CLAMSHELL CONDUIT SCREW, SOC HD, M 8 - I . 25 X 30MM WASHER, FLAT, N, M8 WASHER, LOCK, SPLIT, M8 HOSE, 5/16 FUEL, 16" HOSE, 5/16 FUEL, 36" HOSE, 3/8 FUEL, I" LONG ENGINE, KUBOTA, 44HP, DIESEL CASTING, FLYWHL GRD, KB, COMP PLATE, FLYWHLGRD, KB STAND OFF, FLYWHLGRD, KB ADAPTER, 3/8MNPT X A-BULB TEMP MOUNT, ENGINE, 4000HY ASSY, 7" AIR CLEANER, KB SCREW, HEX, M8-1. 25 X 25MM SCREW, SOC HD, M10 - I . 25 X 30MM WASHER, SPLIT LOCK, M10
151369 151743 151747 151754 151893 151915 152444 152518 152587 152676 153842 153941 154172 154496 157523 158289 159857 160203 162816 164223 164600 164721 164855 164860 164958 164958 166472 167291 167498 167499 167500 167503 167508 167509 167512 167513 167515
5 1 6 7 1 4 1 1 1 2 1 2 1 1 1 2 1 9 1 2 1 6 2 19 1 1 1 1 1 1 1 1 1 1 11 9 11
15
SERVICE SAW SERIES
PARTS LIST
FIGURE 6 - PARTS LIST: ASSY, ENGINE, KUBOTA 44HP P/N 167507
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
41 42 43 44 45 46 47 48
CLAMP, 1 - 1 / 4 CUSHION LooP SCREW, SOC SET, CPT, 5/16 -18 X 1-1/2 BRACKET, THROTTLE CABLE, KB PIPE, RADIATOR OUTLET, KB BRACKET, POINTER STOP, KB SCREW, HEX, MI0-1.25 X 40MM pipe, 1-3/4 exhaust, kb Cap, weather, 1-3/4 exhaust
167523 167525 167526 167529 167557 167613 168883 168884
2 1 1 1 1 2 1 1
16
SERVICE SAW SERIES
PARTS LIST
FIGURE 7 - PARTS LIST: ASSY, 7" AIR CLEANER P/N 167509
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
WASHER, 1/4 SAE FLAT SCREW, 1/4-20 X 3/4 HEX HEAD MACHINE SCREW, HEX HD CAP, 1/4-20 X 1
151915 152370 152676
5 1 2
4 5 6 7 8 9 10 11 12 13 14 15
NUT, 1/4-20 NYLOK AIR CLEANER, 7" BRACKET, 7" AIR CLEANER HooD, 2.5" INLET CLAMP, 1-5/16 TO 2-1/4 HOSE ADAPTER, 1-7/800 X 2-1/4 ID TUBE HOSE, Ø1-3/4 X 90 INTAKE (COMP) HOSE, 2-1/2 ID INTAKE (COMP) CLAMP, 2-5/16 TO 3-1/4 HOSE BRACKET, AIR CLEANER, KB PLATE, AIR CLEANER, KB CLAMP, I -3/4 CUSHION LOOP
159857 162607 162608 162609 162816 162857 163985 163986 164242 167510 167511 167522
3 1 1 1 1 1 1 1 2 1 1 1
17
SERVICE SAW SERIES
PARTS LIST
FIGURE 8 - PARTS LIST: ASSY, INSTRUMENT PANEL P/N 167222-NRT
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
SCREW, 1/4-20 X 3/4 FLAT HEAD PHILLIPS MACHINE PLUG, 1/2 FLUSH HEAD BUTTON PANEL, INSTRUMENT (COMP)
154657 156779 160909
1 2 1
4 5 6 7 8 9 10 11 12
CONTROL, THROTTLE-COMP KNOB, DEPTH INDICATOR (COMP) POINTER, DEPTH INDICATOR ASSY, DEPTH INDICATOR LIGHT, 1/2" DIA, PANEL, RED LIGHT, 1/2" DIA, PANEL, GREEN GAUGE, FUEL, ANALOG GAUGE, TACH, DIESEL GAUGE, TEMP, 2"
162616 162629 162630 162881 163938 163939 164151 164152 167501
1 1 1 1 2 1 1 1 1
18
SERVICE SAW SERIES
PARTS LIST
FIGURE 9 - PARTS LIST: ASSY, TRANSMISSION IDLER P/N 167666
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2
SCREW, 3/8-16 X 1-1/4 HEX HEAD CAP WASHER, 3/8 SAE FLAT
150774 150923
2 4
3 4 5 6 7 8 9 10 11 12 13 14
WASHER, 3/8 SPLIT LOCK NUT, 3/8-16 NYLOK HEX BOLT, 3/8-16 X 3-1/2 HEX HEAD TAP NUT, 3/8-16 HEX CENTERLOCK SCREW, HEX, 3/8-16 X 3/4 PULLEY, IDLER, BV3001, W/CSINK SCREW, 3/8-16 X 1-1/4 FLAT HEAD SOCKET BRACKET, IDLER TOWER ARM, TRANS BELT TENSIONER ARM, TRANS BELT IDLER STANDOFF, IDLER ARM, KB ASSY, PULLEY, TRANS BELT, KB
150925 152505 153147 153522 153527 153797 164193 165699 165700 165701 167277 167667
2 1 1 1 1 1 1 1 1 1 1 1
19
SERVICE SAW SERIES
PARTS LIST
FIGURE 10 - PARTS LIST: ASSY, PULLEY, TRANSMISSION BELT P/N 167276
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2
Beraing, Ball 17X40X12MM Washer, 3/8 SAE Flat
137711 150923
3 1
3 4 5 6 7
Washer, 3/8 Split Lock Screw, Hex, 3/8-16 X 3/4 Ring, 1-9/16 Internal Retaining Pulley, 2A/3.0 Idler, Hy Axle, 2A/3.0 Idler Pulley
150925 153527 160898 165697-HY 165698
1 1 2 1 1
20
SERVICE SAW SERIES
PARTS LIST
FIGURE 11 - PARTS LIST: ASSY, C44/48 SUB A P/N 167197-NRT
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
Screw, 3/8-16 X 1-1/4 Hex Head Cap Washer, 1/2 SAE Flat Washer, 3/8 Split Lock
150774 150924 150925
2 8 2
4 5 6 7 8 9
Washer, 1/2 Split Lock Screw, 1/2-13 X 1-1/4 Hex Head Cap Nut, 1/2-20 Hex Assy, Depth Stop Tower Weldment, Radiator Assy, Frame Sub, 4000HY/KB
153524 153532 162586 165710 167199 167294
8 6 2 1 1 1
21
SERVICE SAW SERIES
FIGURE 12 - PARTS LIST: ASSY, C44/48 SUB B P/N 167197-NRT
22
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 12 - PARTS LIST: ASSY, C44/48 SUB B P/N 167197-NRT
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
nut, hex, 5/16 - 18 washer, 3/8 sae flat washer, 3/8 split lock
101196 150923 150925
2 4 4
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
5/16 fender wAsher washer, lock, split, 5/16 washer, flat, sae, 5/16 screw, hex hd cap, 3/8 - 16 x 1 screw, hex, 5/16 - 18 x 2-11/4 screw, flat hd 10 - 24 x 5/8 screw, 5/16 - 18 x 2 hex head bolt, 5/16/ - 18 x 2 - 3/4 hex head tap screw, 5/16 - 18 x 3/8 socket head set clamp, 1 - 5/16 to 2 - 1/4 handle, depth stop ( comp) grommet 1/2 x 1.0 assy, cable, pointer cleat, 1/8" cable ASSY FUEL TANK hose, 2.0 id fuel fill (comp) assy, control panel, less inst assy, radiator
151053 151754 151754 152507 153951 155494 156974 156974 157083 162816 163987 164207 165739_0 165740 167210 167213 167215-NRT 167946
4 8 8 4 2 2 4 2 2 2 1 1 1 1 1 1 1 1
23
SERVICE SAW SERIES
FIGURE 13 - PARTS LIST: ASSY, C44/48 SUB C P/N 167197-NRT
24
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 13 - PARTS LIST: ASSY, C44/48 SUB C P/N 167197-NRT
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
Nut, 3/8 - 16 hex WASHER, FLAT, USS, 3/8 Clamp, 5/8 hose
101188 101360 15198
1 2 2
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
screw, hex hd, 5/16 - 18 x 1 washer, lock, split, 5/16 washer, flat, sae, 5/16 nut, hex, 1/4 - 20 WASHER, 1/4 SAE FLAT SCREW,HEX HD , 1/4 - 20 X 3/4 NUT, 3/8 - 16 NYLOK HEX SCREW, HEX HD 12 - 13 X 2 CABLE, 4GA X 24 BLACK BATTERY NUT, HEX W/WSHR, 1/4 - 20 SCREW, HEX, 5/16 - 18 X 2-1/4 HOSE, 1/4 FUEL, 36" LONG ELBOW, 1/4 MNPT STREET NUT, 1/2 - 13 NYLOK HEX SCREW, 3/8 - 16 X 1-3/4 HEX HD NUT, 1/4 -20 NYLOK NIPPLE, 1/4 NPT X CLOSE, BRASS HOSE, 1/4 NPT X 9/16 JIC 90 HYD SPRING, .44 X 10.3 X .041 EXTENSION CABLE, 52" DEPTH INDICATOR BATTERY, 12 VOLT 40 AMP-HOUR BRACKET, BATTERY HOLDDOWN CABLE, TRANS CONTROL BALL JOINT, 30 SERIES NUT, HEX, NYLOK, 1/4 - 20 COVER, 1" BATTERY TERMINAL, RED STUD, 1/4 - 20 X 8 WASHER, 1/4 RUBBER FENDER CABLE, 4GA X 52 RED BATTERY FITTING, 3/8 MNPT X 1/4 BARB, BRASS PUMP, HYDRAULIC FITTING, TEE, 1/4 FNPT, BRASS CABLE, 4GA X 29 RED BATTERY PANEL, TOWER R/H FITTING, 3/8 MNPT X 1/4 FNPT PLUG, HOLE PLASTIC 1.0"
151743 151747 151754 152507 151915 152370 152505 153533 153849 153941 153951 154163_11 154615 155162 158398 159857 159905 162600 162627 162628 162642 162647 162858_1 162859 162936 163940 164212 164593 166050 167239 167271 167272 167273 167284-NRT 167506 167941
2 8 6 4 2 2 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 2 1 1 1 1 1 1 1 1
25
SERVICE SAW SERIES
FIGURE 14 - PARTS LIST: ASSY, C44/48 SUB D P/N 167197-NRT
26
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 14 - PARTS LIST: ASSY, C44/48 SUB D P/N 167197-NRT
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
NUT, HEX, 5/16-18 GRIP, HANDLE, 1.0 ID ELBOW, 1/2 MNPT 90 STREET, GALV
101196 150842 150844
2 2 1
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
HOSE, 3/8 X 5/8 VINYL, 18" WASHER, 1/2 SAE FLAT CLAMP, 5/8 HOSE FITTING, 1/2 MNPT X 3/4 FNH SCREW, HEX HD, 5/16 - 18 X 1 WASHER, LOCK, SPLIT, 5/16 WASHER, 5/16 SAE FLAT WASHER, 1/2 SPLIT LOCK SCREW, 1/2-13 X 1-1/4 HEX HEAD CAP FITTING, 1/2 MNPT X 3/8 BARB SCREW, HEX, 5/16-18 X 2-1/4 KNOB, 3 PRONG 3/8- 16 X I PLATE, REAR FRAME HANDLEBAR KNOB, 1/2-13 T-HANDLE WRENCH, 3/4" COMBO WRENCH, 3-1/4 PIN SPANNER WRENCH, I" OPEN END FITTING, 1/2 NPT COUPLER BRACKET, WRENCH PANEL, TOWER L/H ASSY, BACK PANEL, LATCHING
150845 150924 151198 151322 151743 151747 151754 153524 153532 153653 153951 156175 161106 161158 162635 162654 162655 162656 164208 164739 167285-NRT 167505-NRT
1 5 1 1 2 8 10 5 5 1 6 1 1 2 2 1 1 1 1 1 1 1
27
SERVICE SAW SERIES
FIGURE 15 - PARTS LIST: ASSY, C44/48 SUB E P/N 167197-NRT
28
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 15 - PARTS LIST: ASSY, C44/48 SUB E P/N 167197-NRT
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
NUT, HEX, 5/16-18 SCREW, 3/8 - 16 X 1/34 HEX HEAD CAP WASHER, 1/2 SAE FLAT
101196 150920 150924
2 2 4
4 5 6 7 8 9 10 11 12
5/16 FENDER WASHER NUT, 3/8 - 16 NYLOK HEX WASHER, 1/2 SPLIT LOCK SCREW, 1/2 - 13 X 1-1/4 HEX HEAD CAP SCREW, 5/16 - 18 X 1 -1/4 HEX HEAD MACHINE ASSY, POINTER, FRONT ASSY, REAR POINTER BRACKET, ENGINE GUIDE, RIGHT BRACKET, ENGINE GUIDE, LEFT
151053 152505 153524 153532 153950 160931 163824 167242 167243
2 2 4 4 1 1 1 1 1
29
SERVICE SAW SERIES
PARTS LIST
FIGURE 16 - PARTS LIST: ASSY, DEPTH STOP P/N 165710
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
WASHER, 1/2 SAE FLAT SCREW, 5/16 - 18 X 1/2 SOCKET HEAD SET FITTING, 1/4 - 28 GREASE
150924 152607 153852
2 4 1
4
PIN, 5/16 X 1-1/4 GROOVE
160458
1
5 6 7 8 9 10 11 12 13
TUBE, DEPTH STOP ARM, DEPTH STOP LINKAGE CUP, DEPTH STOP ROD END, 1/2" BALL JOINT NUT, 1/2 - 20 HEX BEARING, 1 X 2 X 1/8 BRONZE THRUST COLLAR, SHAFT, 1/2 U-JOINT, 1.0 OD X 0.5 ID (COMP) SCREW, DEPTH STOP
161138 161156 162582 162583 162586 162623 162633 163988 165708
1 1 1 2 2 1 1 1 1
30
SERVICE SAW SERIES
PARTS LIST
FIGURE 17 - PARTS LIST: ASSY, FUEL TANK P/N 167210
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
PLUG, 1/4NPT HEX SOCKET SENDER, FUEL ELBOW, 1/4MNPT X 5/16BARB, BRASS
154679 162636 164278
1 1 1
4
TANK, FUEL
167211
1
31
SERVICE SAW SERIES
PARTS LIST
FIGURE 18 - PARTS LIST: ASSY, RADIATOR P/N 167946
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
WASHER, 1/2 SAE FLAT SCREW, SHOULDER, 1/2 X 1/2 WASHER, 1/4 SAE FLAT
150924 151753 151915
4 4 6
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
SCREW, 1/4 - 20 X 1/2 HEX HEAD SCREW, 1/4 - 20 X 1/2 TRUSS HEAD NUT, HEX W/WSHR, 1/4 - 20 WASHER, #10 SAE FLAT BUMPER, 1 - 1/2 OD X 1/4 ID X 3/4 SCREW, PAN HD PHIL MS 10 - 24 X 3/4 washer #10, internal teeth washer, lock, 14 int tooth grommet 12/ x 1.0 fan, electric, 12vdc bracket, radiator bottle reservoir, coolanta okugm gike okastuc 1,0" bracket, radiataor left bracket, radiator right housing, radiator fan radiator, 18.25 x 27,5
152608 153880 153941 154369 154496 156641 158336 162490 164207 167204 167208 167209 167941 167942 167943 167944 167945
9 2 1 4 2 4 4 8 4 1 1 1 2 1 1 1 1
32
SERVICE SAW SERIES
PARTS LIST
FIGURE 19 - PARTS LIST: ASSY, CONTROL PANEL, LESS INST P/N 167215-NRT
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
WASHER, 3/8 SPLIT LOCK SCREW, 5/16-18 X 1 HEX HEAD MACHINE WASHER, 5/16 SAE FLAT
2 2 4
150925 151743 151744
4 5 6 7 8 9 10 11 12 13 14 15
SCREW, 1/4-20 X 1/2 TRUSS HEAD SCREW, 5/16-18 X 2 HEX HEAD CONTACTS, NC NUT, 5/16-18 NYLOK HEX ASSY, SWITCH BUTTON, GAS ASSY, WATER VALVE PANEL, CONTROL LABEL, SET, CONTROL PANEL ASSY, CONTROLHEAD, FNR PLATE, UP/DOWN CONTROL MOUNT ASSY, UP/DOWN CONTROL SPRING, EXT, 7/160D X .048WD X 3.0L
2 2 1 2 1 1 1 1 1 1 1 1
153880 155494 156204 158289 162080 164161 167217 167218 167226 167232 167233 167270
33
SERVICE SAW SERIES
PARTS LIST
FIGURE 20 - PARTS LIST: ASSY, CONTROLHEAD, FNT SUB P/N 167226
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
NUT, 3/8-16 HEX SCREW, 10-24 X 1/2 PAN HEAD PHILLIPS MACHINE NUT, 10-24 HEX
2 4 2
101188 151744 151749
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
WASHER, 5/16 SAE FLAT WASHER, 1/4 SAE FLAT SCREW, 1/4-20 X 3/4 HEX HEAD MACHINE SCREW, 5/16-18 X 1-1/2 HEX HEAD MACHINE WASHER, 1/4 SPLIT LOCK WASHER, #10 SPLIT LOCK SCREW, PAN HD PHIL MS I0-24X3/4 SCREW, 5/16 - 18 X 3/8 SOCKET HEAD SET NUT, 5/16-18 NYLOK HEX BRACKET, FNR CONTROL CLAMP, 30 SERIES CONDUIT JOURNAL, FNR CONTROL WASHER, 2.0 X .812 X .088 NYLON BRACKET, FNR PIVOT SPRING, 1.50 X .755 X .045, DISK SCREW, 3/4 X 1/2 SOCKET HEAD SHOULDER HANDLE, FNR GRIP BAR, FNR HANDLE BLOCK, FNR HANDLE PLATE, FNR CABLE BRACKET, FNR SPRING
2 2 2 2 2 6 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1
151754 151915 152370 152467 152591 153684 156641 157084 158289 162634 162860 162889 162890 162891 162892 162893 167227 167228 167229 167230 167231
34
SERVICE SAW SERIES
PARTS LIST
FIGURE 21 - PARTS LIST: ASSY, UP/DOWN CONTROL P/N 167233
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
WASHER, 3/8 SAE FLAT NUT, 10-24 HEX WASHER, 1/4 SAE FLAT
150923 151749 151915
2 2 2
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
ELBOW, 3/8 NPT STREET SCREW, HEX HD CAP, 1/4-20 X 1 NUT, HEX W/WSHR, 1/4-20 WASHER, #10 SAE FLAT SCREW , SOC HD CAP, 1/4- 20 X I NUT, HEX 10-32 SCREW, 10-32 X 1 HEX HEAD CAP SCREW, PAN HD PHIL MS 10-24X3/4 WASHER #10, INTERNAL TEETH NUT, HEX, NYLK, 1/4-28 CAP, PUSH-ON, VINYL, I X 1/4 VALVE, 3/8 ANGLE NEEDLE HANDLE, UP/DOWN CONTROL PLATE, UP/DOWN ADJ ARM, DEPTH CONTROL ADJ WASHER, 5/16 FLANGED PLASTIC FITTING, 3/8 MNPT X 1/4 BARB, BRASS FITTING, 3/8 NPT X 3/8 JIC SPRING, EXT, .300D X .037WD X 3/4L
152074 152676 153941 154369 154683 156269 156270 156641 158336 163936 167216 167234 167235 167236 167237 167238 167239 167240 167241
1 2 3 1 1 2 1 1 2 1 1 1 1 1 1 2 1 1 1
35
SERVICE SAW SERIES
PARTS LIST
FIGURE 22 - PARTS LIST: ASSY, WATER VALVE P/N 164161
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
ELBOW, 1/2 MNPT 90 STREET, GALV FITTING, 1/2 MNPT X 3/8 BARB VALVE, BALL 1/2"
1 2 1
150844 153653 153796
4 5
SCREW, PAN HD PHIL 10-24 X 5/16 BRACKET, WATER VALVE
2 1
159494 162650
36
SERVICE SAW SERIES
PARTS LIST
FIGURE 23 - PARTS LIST: ASSY, POINTER, FRONT P/N 160931
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
NUT, 3/8-16 HEX NUT, 3/8-16 NYLOK HEX WHEEL, POINTER, 3"
2 1 1
101188 152505 155066
4 5 6 7 8
BUSHING, 3/8 ID X 1-5/8L SCREW, 3/8-16 X 2-1/2 HEX HEAD CAP KNOB, 3 PRONG 3/8-16 X 1 POINTER ARM, FRONT ASSY, POINTER WHEEL
1 1 2 1 1
155153 156030 156175 160938 165238
37
SERVICE SAW SERIES
PARTS LIST
FIGURE 24 - PARTS LIST: ASSY, POINTER, WHEEL P/N 165238
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
WHEEL, POINTER, 2.75 X .5 X .40 RETAINER, PUSSH, 3/8 CAP RETAINER, PUSH, 3/8 THRU
165234 166259 166260
1 1 1
4
AXLE, POINTER
166261
1
FIGURE 25 - PARTS LIST: ASSY, REAR POINTER P/N 163824
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
WASHER, 1/2 SAE FLAT NUT, 1/2 - 13 NYLOK HEX ARM, REAR POINTER
150924 155162 160951
1 1 1
4
STANDOFF, REAR POINTER
163825
1
38
SERVICE SAW SERIES
PARTS LIST
FIGURE 26 - PARTS LIST: ASSY, SHAFT GUARD P/N 166056
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
SCREW, HEX HD 1/4 - 20 X 3/8 KNOB, 3 PRONG 3/8 - 16 X 1 GUARD, SHAFT
153526 156175 161106
2 1 1
4
BACK PLATE, SHAFT GUARD
166057
1
39
SERVICE SAW SERIES
FIGURE 27 - PARTS LIST: ASSY, FRAME SUB P/N 167294
40
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 27 - PARTS LIST: ASSY, FRAME SUB P/N 167294
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
SCREW, 3/8-16 X 1-1/4 HEX HEAD CAP WASHER, 3/8 SAE FLAT WASHER, 1/2 SAE FLAT
150774 150923 150924
4 4 14
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
WASHER, 3/8 SPLIT LOCK NUT, 1/2-13 HEX NUT, 1/4-20 HEX WASHER, 1/2 SPLIT LOCK SCREW, 1/2-13 X 1-1/4 HEX HEAD CAP SCREW, 1/2-13 X 1-3/4 HEX HEAD CAP EYEBOLT, 1/4-20 X 2 RING, .75 E-STYLE RETAINING PIN, ø3/4 X 3-1/2 CLEVIS ASSY, BLADE SHAFT BRACKET, TRANSMISSION GROMMET, 1/2 X 1.0 BOLT, 1/2-13 X 2.0 HEX HEAD TAP GREASE, MOBIL XHP222, 2 OZ BOLT, 1/2- 13 X 2- 1/2 HEX HEAD TAP SPRING, 1.0 X 7.0 X .135 EXTENTION ASSY, TRUCK, FRT PIVOT FRAME, WELDMENT MAIN ASSY, TRANSMISSION
150925 151282 151893 153524 153532 153853 153887 161163 161164 161210 161240 162493 162598 162604 162605 162830 165705 165706 167198
4 3 2 14 8 6 1 2 1 1 1 4 2 1 1 1 1 1 1
41
SERVICE SAW SERIES
PARTS LIST
FIGURE 28 - PARTS LIST: ASSY, BLADE SHAFT P/N 161210
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
CLAMP, 5/8 HOSE WASHER, 5/16 SPLIT LOCK PLUG, 1/8NPT HEX SOCKET
151198 151747 152472
2 4 3
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
SCREW, 5/16-18 X 5/8 HEX HEAD CAP HOSE, 1/4 FUEL FITTING, 1/8 MNPT X 1/4 BARB SHAFT, 1-5/8 BLADE BEARING, 35X72X27, D-ROW BALL KEY, WOODRUFF, 5/16 X 1-1/2 BLOCK, 72mm BEARING RING , 72mm INTERNAL RETAINING SEAL, 1-3/8 X 72mm OIL TUBE, BLADE SHAFT FLANGE, BLADESHAFT TUBE RING, RETAINING, 2-1/2 EXTERNAL O-RING, 3/32 X 2-1/20D PLUG, 3/8NPT BRONZE BREATHER FITTING, 1/4 FNPT X 1/4 BARB
153949 154163 155809 160787 160810 160816 161199 161201 161202 161203 161205 161206 161207 161209 162601
4 1 1 1 2 1 2 2 2 1 2 2 2 1 1
42
SERVICE SAW SERIES
PARTS LIST
FIGURE 29 - PARTS LIST: ASSY, TRUCK, FRT PIVOT P/N 165705
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
BEARING, 1.0 ID PILLOW BLOCK CYLINDER, 4" HYDRAULIC WHEEL, 6 X 2-1/2 X I
157924 160846 160848
2 1 2
4 5 6 7 8 9 10
COLLAR, 1.0 SHAFT WASHER, 1 SAE FLAT PIN, Ø3/4 X 5 CLEVIS RING, .75 E-STYLE RETAINING HOSE, 1/4NPT X 9/16JIC90 HYD SPACER, 1.0 X .75 X 1.94 TRUCK, FRONT PIVOT
160849 160851 160961 161163 162600 164046 165704
2 4 1 2 1 1 1
43
SERVICE SAW SERIES
FIGURE 30 - PARTS LIST: ASSY, TRANSMISSION P/N 167198
44
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 30 - PARTS LIST: ASSY, TRANSMISSION P/N 167198 ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1
KEY, 1/4 X 1 WOODRUFF
150795
1
2
WASHER, 3/8 SAE FLAT
150923
5
3
WASHER, 1/2 SAE FLAT
150924
2
4
WASHER, 3/8 SPLIT LOCK
150925
4
5
SCREW, SOC HD CAP, 1/4-20 X 1
151049
18
6
SCREW, 10-24 X 3/8 PAN HEAD PHILLIPS MACHINE
151097
2
7
NUT, 3/8-16 NYLOK HEX
152505
1
8
SCREW, 3/8-16 X 3 HEX HEAD CAP
153113
4
9
WASHER, 1/2 SPLIT LOCK
153524
2
10
WASHER, #10 SPLIT LOCK
153684
2
11
PUMP, TRANSMISSION
153783
1
12
PULLEY, A4.0 X 17mm BORE OFFSET
153826
1
13
PIN, WIRE STOP
153842
2
14
SCREW, 1/2-13 X 1-3/4 HEX HEAD CAP
153853
2
15
SCREW, SET CNE PT 1/4 -20 X 1/4
153864
1
16
KEY, WOODRUFF, 1/8 X 1/2
153865
2
17
SCREW, HEX HD FL 10-24X 5/16
154172
2
18
SCREW, 1/4-20 X 1/2 PAN HEAD PHILLIPS MACHINE
155452
2
19
SCREW, 1/4-20 X 1/2 SOCKET HEAD SET
155804
2
20
BEARING, 1.0 ID PILLOW BLOCK
157924
2
21
COLLAR, 1.0 SHAFT
160849
1
22
WHEEL, 10 X 3 REAR
160960
2
23
PLUG, 3/8 NPT HEX SOCKET, GALV
161208
2
24
ASSY, DIFFERENTIAL
161232
1
25
ASSY, ENGAGEMENT GEAR
161233
1
26
ASSY, PUMP PINION
161235
1
27
ASSY, TRANS FORK 2
161236
1
28
ASSY, TRANS FORK I
161237
1
29
BUSH I NG, I" KEYLESS HUB
161244
2
30
ASSY, TRANS CASE I
161248
1
31
ASSY, TRANS CASE 2
161250
1
32
LEVER, TRANS CONTROL
161263
1
33
PLATE, LOCKER, KEYED
161264
1
34
SPRING, I .50D X 1.3 COMPRESSION
161279
2
35
BRIDGE, TRANS BEARING
161311
1
36
BEARING, I X 2 X 1/8 BRONZE THRUST
162623
2
37
COLLAR, 1/2 SHAFT
162633
2
38
LEVER, TRANS FORK
162673
2
39
SPRING, .56 OD X 1.38 COMPRESSION
162829
2
40
PIN, 1/4 X 5/8 DOWEL
162849
3
41
CLAMP, 30 SERIES CONDUIT
162860
1
42
ASSY, CHANGE GEAR
162883
1
43
CABLE, T2L CONTROL, L (COMP)
163935
2
44
OIL, 80-90 SAE GEAR
164971
1
45
SEALANT, HI-TEMP FORM-A-GASKET
164972
1
45
SERVICE SAW SERIES
FIGURE 31 - PARTS LIST: ASSY, 20" BLADE GUARD P/N 168279-20
46
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 31 - PARTS LIST: ASSY, 20" BLADE GUARD P/N 168279-20
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
CLAMP, 5/8 HOSE SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE WASHER, LOCK, SPLIT, 5/16
151198 151369 151747
2 6 6
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
WASHER, 5/16 SAE FLAT NUT, 1/4-20 HEX WASHER, 1/4 SAE FLAT SCREW, 1/4-20 X 3/4 HEX HEAD MACHINE WASHER, 1/4 SPLIT LOCK SCREW, HEX HD CAP, 1/4-20 X 1 SCREW, 1/4-20 X 1/2 TRUSS HEAD NUT, HEX W/WSHR, 1/4-20 TIE, NYLON CABLE, 1/8 X 4, BLACK NUT, 1/4-20 NYLOK LOCK, BLADe GUARD BUTTON, RELEASE GUARD, SPLASH, NO LOGO SPRING, EXTENSION ASSY, HINGE HOSE, VINYL, 1/4 X 1/2 (24"l) ASSY, WATER MANIFOLD, 2T GUARD, 20" FRONT BLADE GUARD, 20" REAR BLADE LATCH, 20" BLADE GUARD
151754 151893 151915 152370 152591 152676 153880 153941 158528 159857 159998 159999 160310-NL 160875 163979 167620 167624 168277-20 168278-20 168528
6 2 8 3 2 4 2 2 2 5 1 1 1 2 1 2 1 1 1 2
47
SERVICE SAW SERIES
FIGURE 32 - PARTS LIST: ASSY, 26" BLADE GUARD P/N 168279-26
48
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 32 - PARTS LIST: ASSY, 26" BLADE GUARD P/N 168279-26
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
CLAMP, 5/8 HOSE SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE WASHER, LOCK, SPLIT, 5/16
151198 151369 151747
2 6 6
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
WASHER, 5/16 SAE FLAT NUT, 1/4-20 HEX WASHER, 1/4 SAE FLAT SCREW, 1/4-20 X 3/4 HEX HEAD MACHINE WASHER, 1/4 SPLIT LOCK SCREW, HEX HD CAP, 1/4-20 X 1 SCREW, 1/4-20 X 1/2 TRUSS HEAD NUT, HEX W/WSHR, 1/4-20 TIE, NYLON CABLE, 1/8 X 4, BLACK NUT, 1/4-20 NYLOK LOCK, BLADe GUARD BUTTON, RELEASE GUARD, SPLASH, NO LOGO SPRING, EXTENSION ASSY, HINGE HOSE, VINYL, 1/4 X 1/2 (24"l) ASSY, WATER MANIFOLD, 4T GUARD, 26" FRONT BLADE GUARD, 26" REAR BLADE LATCH, 26" BLADE GUARD
151754 151893 151915 152370 152591 152676 153880 153941 158528 159857 159998 159999 160310-NL 160875 163979 167620 167625 168277-26 168278-26 168280
6 2 8 3 2 4 2 2 2 5 1 1 1 2 1 4 1 1 1 2
49
SERVICE SAW SERIES
FIGURE 33 - PARTS LIST: ASSY, 30" BLADE GUARD P/N 168279-30
50
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 33 - PARTS LIST: ASSY, 30" BLADE GUARD P/N 168279-30
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
CLAMP, 5/8 HOSE SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE WASHER, LOCK, SPLIT, 5/16
151198 151369 151747
2 6 6
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
WASHER, 5/16 SAE FLAT NUT, 1/4-20 HEX WASHER, 1/4 SAE FLAT SCREW, 1/4-20 X 3/4 HEX HEAD MACHINE WASHER, 1/4 SPLIT LOCK SCREW, HEX HD CAP, 1/4-20 X 1 SCREW, 1/4-20 X 1/2 TRUSS HEAD NUT, HEX W/WSHR, 1/4-20 TIE, NYLON CABLE, 1/8 X 4, BLACK NUT, 1/4-20 NYLOK LOCK, BLADe GUARD BUTTON, RELEASE GUARD, SPLASH, NO LOGO SPRING, EXTENSION ASSY, HINGE LATCH, 30" BLADE GUARD HOSE, VINYL, 1/4 X 1/2 (24"l) ASSY, WATER MANIFOLD, 4T GUARD, 30" FRONT BLADE GUARD, 30" REAR BLADE
151754 151893 151915 152370 152591 152676 153880 153941 158528 159857 159998 159999 160310-NL 160875 163979 165874 167620 167625 168277-30 168278-30
6 2 8 3 2 4 2 2 2 5 1 1 1 2 1 2 4 1 1 1
51
SERVICE SAW SERIES
FIGURE 34 - PARTS LIST: ASSY, 36" BLADE GUARD P/N 168279-36
52
PARTS LIST
SERVICE SAW SERIES
PARTS LIST
FIGURE 34 - PARTS LIST: ASSY, 36" BLADE GUARD P/N 168279-36
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
CLAMP, 5/8 HOSE SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE WASHER, LOCK, SPLIT, 5/16
151198 151369 151747
2 6 6
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
WASHER, 5/16 SAE FLAT NUT, 1/4-20 HEX WASHER, 1/4 SAE FLAT SCREW, 1/4-20 X 3/4 HEX HEAD MACHINE WASHER, 1/4 SPLIT LOCK SCREW, HEX HD CAP, 1/4-20 X 1 SCREW, 1/4-20 X 1/2 TRUSS HEAD NUT, HEX W/WSHR, 1/4-20 TIE, NYLON CABLE, 1/8 X 4, BLACK NUT, 1/4-20 NYLOK LOCK, BLADe GUARD BUTTON, RELEASE GUARD, SPLASH, NO LOGO SPRING, EXTENSION ASSY, HINGE HOSE, VINYL, 1/4 X 1/2 (24"l) ASSY, WATER MANIFOLD, 4T LATCH, 36" BLADE GUARD GUARD, 36" FRONT BLADE GUARD, 36" REAR BLADE
151754 151893 151915 152370 152591 152676 153880 153941 158528 159857 159998 159999 160310-NL 160875 163979 167620 167625 167658 168277-36 168278-36
6 2 8 3 2 4 2 2 2 5 1 1 1 2 1 4 1 2 1 1
53
SERVICE SAW SERIES
PARTS LIST
FIGURE 35 - PARTS LIST: ASSY, WATER MANIFOLD, 2T P/N 167624
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
NIPPLE, 1/4 NPT X CLOSE, BRASS FITTING, 3/4 X 11.5 MNH X 1/4 FNPT FITTING, PUSH ON HOSE 1/4 X 1/4 MALE
159905 163992 165183
1 1 2
4
MANIFOLD, WATER, 2 TUBE
167622
1
FIGURE 36 - PARTS LIST: ASSY, WATER MANIFOLD, 4T P/N 167625
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
NIPPLE, 1/4 NPT X CLOSE, BRASS FITTING, 3/4 X 11.5 MNH X 1/4 FNPT FITTING, PUSH ON HOSE 1/4 X 1/4 MALE
159905 163992 165183
1 1 4
4
MANIFOLD, WATER, 4 TUBE
167623
1
54
SERVICE SAW SERIES
PARTS LIST
FIGURE 37 - PARTS LIST: ASSY, HINGE P/N 163979
ITEM NO.
DESCRIPTION
PART OR IDENTIFYING NO.
QTY. REQ.
1 2 3
WASHER, 3/8 SAE FLAT WASHER, 3/8 SAE LOCK SCREW, 38 - 16 X 3-3/4 HEX HD CAP
150923 150925 152504
2 1 1
4 5 6
NUT, 3/8 - 16 X 3 NYLOK HEX PLATE, FRONT HINGE PLATE, REAR HINGE
152505 163977 163978
1 1 1
55
NOTES
56
NOTES
57
SERVICE SAW SERIES
CONTACT AND LIMITED WARRANTY
CONTACT Please contact Saint-Gobain Abrsives, Inc. Customer Service Department with any questions you might have regarding distributors, parts or service. Telephone: (254) 918-2310 Fax: (254) 918-2312 Customer Service Hours: Monday through Friday, 6AM-6PM CST Saint-Gobain Abrasives, Inc. 2770 W. Washington St. Stephenville, TX 76401 WARRANTY Norton warrants all products manufactured by it against defects in workmanship or materials for a period of one (1) year from the date of shipment to the customer. The responsibility of Norton under this warranty is limited to replacement or repair of defective parts at Norton’s Indianapolis, Indiana Distribution Center, or at a point designated by it, of such part as shall appear to us upon inspection at such point, to have been defective in material or workmanship, with expense for transportation borne by the customer. In no event shall Norton be liable for consequential or incidental damages arising out of the failure of any product to operate properly. Integral units such as gasoline engines, electric motors, batteries, tires, transmissions, etc., are excluded from this warranty and are subject to the prime manufacturer’s warranty. This warranty is in lieu of all other warranties, expressed or implied, and all such other warranties are hereby disclaimed.
58
NOTES
59
G N I RN
A W
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead based paints, • Crystalline silica from bricks and cemetn and other masonry products, and • Arsenci and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how ofter you do this ype of work. To reduce your exporsure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Saint-Gobain Abrasives, Inc. 2770 West Washington Street Stephenville, TX 76401-3798 Phone: 254-918-2310 Fax: 254-918-2312
All THE MUSCLE YOU NEED™.
