Transcript
Rechargeable Sealed Lead-Acid Battery
PS-12100 12 Volt 12.0 Amp. Hrs. Features: Absorbent Glass Mat (AGM) technology for superior performance. Valve regulated, spill proof construction allows safe operation in any position. Power/volume ratio yielding unrivaled energy density. Rugged plastic case and cover Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified. U.L. recognized under file number MH 14328.
PERFORMANCE SPECIFICATIONS Nominal Voltage....................................................................................................................................................... 12 volts (6 cells in series) Nominal Capacity 20 hour rate ( 500mA to 10.50 volts) .................................................................................................................................. 12.0 A.H. 10 hour rate ( 900mA to 10.50 volts) ...................................................................................................................................11.0 A.H. 5 hour rate ( 1650mA to 10.20 volts) ...................................................................................................................................10.0 A.H. 1 hour rate (6000mA to 09.00 volts) ...................................................................................................................................7.00 A.H. Approximate Weight......................................................................................................................................................... 9.2 pounds (4.2 kg) Energy Density (20 hour rate).............................................................................................. 1.63 Watt-hours/cubic inch (99.5 Watt-hours/l) Specific Energy (20 hour rate)................................................................................................. 15.6 Watt-hours/pound (34.3 Watt-hours/kg) Internal Resistance (Fully Charged Battery)................................................................................................... 18 milliohms (approximately) Maximum Discharge Current ( ≥ 7 Min.)................................................................................................................................... 36 amperes Maximum Short-Duration Discharge Current ( ≥ 10 Sec.)..................................................................................................... 120 amperes Terminal configuration ....................................... Quick disconnect tabs, “F1”: 0.187” x 0.032” Mate with AMP. INC. FASTON “187” series Shelf Life — % of nominal capacity at 68o F (20o C) 1 Month......................................................................................................................................................................................... 97% 3 Months....................................................................................................................................................................................... 91% 6 Months....................................................................................................................................................................................... 83% Operating Temperature Range Charge.................................................................................................................................................................... -4oF (-20oC) to 122oF (50oC) Discharge............................................................................................................................................................... -4oF (-20oC) to 140oF (60oC) Case................................................................................................................................................................................................. ABS Plactic
TECHNICAL DATA:
PS-12100 Discharge Characteristics
100
(V)
Charging is not necessary unless 100% of capacity is required.
80
Charging before 5oC use is necessary (41oF) to help recover full capacity.
60 40oC (104oF)
40
o
30 C o (86 F)
Charge may fail to restore full capacity. Do not let batteries reach this state.
20oC (68oF)
14.0
o
13.0 12.0 11.0 10.0
6A
9.0
Final Voltage
8.0
0 0
2
o
Ambient Temperature 20 C (68 F)
Terminal Voltage
Capacity Retention Ratio (%)
Shelf Life and Storage
4 6 8 10 12 14 16 18 20 Standing Period (Months)
2.4A
1.2A 0.6A
12A 24A
1.2
2.4
6
12
24 36 48 1 min.
2
4 6 8 10 hrs.
20 40
Discharge Time
Life Characteristics in Stand-By Use o
Discharge Time vs. Discharge Current
o
20 15 10
80 Float Charging Voltage 2.25-2.30V/Cell
60 40
5 hrs.
20 0
1
2
Years
3
4
Life Characteristics in Cyclic Use
2
9.0V
10
80
5 Discharge Depth 100%
Discharge Depth 50%
Discharge Depth 30%
9.60V
30
100
60
10.2V
1. Discharge Current 0.2C (Final Voltage 1.7V/Cell) 2. Charge Current: 0.1C 3. Ambient Temperature: 20oC to 25oC (68oF to 77oF)
0
0
200
400 600 800 Number of Cycles
1000
o
8.10V
0.6
40 20
o
40 C (104 F) o o 20 C (68 F) o o 0 C (32 F)
1.2 2.4 6 12 Discharge Current (A)
24
Physical Dimensions: in. (mm)
1200 4.00 (102)
Retention Capacity (%)
120
Final Voltage 10.5V
1 min.
0 Discharge Time
Retention Capacity (%)
Ambient Temperature 20 C (68 F)
100
CHARGING Cycle Applications: Limit initial current to 2000mA. Charge until battery voltage (under charge) reaches 14.40 to 14.70 volts at 68oF (20oC). Hold at 14.40 to 14.70 volts until current drops to approximately 100mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to “float” voltage. “Float” or “Stand-By” Service: Hold battery across constant voltage source of 13.50 to 13.80 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. NOTE: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged after 6-9 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation.
SALES & MARKETING 3106 Spring Street Redwood City, CA 94063 USA Tel: 650-364-5001 Fax: 650-366-3662
[email protected] PRINTED IN U.S.A.
3.86 (98)
3.70 (94)
5.95 (151)
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice.
ISO9002 FM39170 www.power-sonic.com
CUSTOMER SERVICE 9163 Siempre Viva Road San Diego, CA 92154 USA Tel: 619-661-2030 Fax: 619-661-3648
[email protected] 11/02 1.5M
