Transcript
Product information Nextrema G3 B 6000-840 ETDD +HFSX LV TOC: 6631551 Luminaire type LED weather-proof luminaire.
file TX047410 UGR l = 25.1 UGR q = 25.3 LFEC = F0
Applications Stairwells, canopied outdoor areas not exposed to general weather, Cold stores, industrial facilities, utility rooms, escape tunnels, car parks and damp room areas of all types. Compliant to DIN 10500. The luminaires are suitable for applications in IFS Version 6 and/or BRC Global Standard Food Version 7-certified companies in the food and beverage industries. Luminaire with limited surface temperature in accordance with DIN EN 60598-2-24, suitable for use in work locations exposed to fire hazards.
c0-c180 c90-c270
Mounting methods For ceiling, wall and suspended mounting. Mounting clips and triangular brackets for suspended mounting contained within the scope of supply. Suitable for installing to 190 VZ mounting rail.
Colour anthracite DB 703 ( ···26) Weight 3.2 kg Safety class I Hot wire test 650 °C Impact resistance 0,5 J Degree of protection IP66 LFEC F0 Cibse BZ 3/2.5/BZ 4 LOR 1,00
Optical system PMMA diffuser with inner prism structure. With symmetric wide light intensity distribution. LED system Luminaire luminous flux 6200 lm, connected load 45 W, luminous efficiency of luminaire 138 lm/W. Light colour neutral white, colour temperature 4000 K, colour rendering index Ra > 80. Service life L85 (tq 35 °C) = 50,000 h, service life L80 (tq 35 °C) = 85,000 h. Luminaire body Luminaire body of die-cast aluminium. Robust concept with vibrationresistant components. Permissible ambient temperature (ta): -30 °C - +35 °C. Electrical connection Connection devices at both face ends implemented as socket or plug, WIELAND type. Suitable connection socket and plug included in scope of supply.
492
Supplementary equipment With through-wiring 5 x 1,5 mm². With integrated HF DALI motion sensor for specific use in trunking solutions. Can be combined with a +HFSB master luminaire or with further +HFSX sensor luminaires (max. 40) to create a complete system. Connection of up to 15 DALI luminaires possible. Function parameters of the HF motion sensor can be set with IR remote control optionally available as an accessory.
96
Electrical version With electronic transformer, digitally dimmable (DALI).
98
1047
Information regarding the integrated, active HF motion sensor with brightness function: Transmitting frequency 5.8 GHZ (+/- 75 MHz), transmitting power < 5 mW, Connected load in standby operation < 0.5 W, Recommended installation height in case of ceiling mounting 220 cm - 400 cm, in case of wall mounting 180 cm - 220 cm, Detection are on the ground: circular, diameter of up to 8 m. With the IR remote control - available as an accessory - the functional parameters signal strength, holding time, light value and dimming level can be adjusted. A dropping below the set brightness threshold effects the motion-independent switching on of the luminaire. Optionally, a brightnessindependent operating mode can be set. An exceeding of the brightness threshold set as well as the expiration of the holding time after the last detected movement effects a switching off of the luminaire. In dimmable luminaires (ETDD), the setting of a base brightness can alternatively be performed in the operating mode OFF. The desired base brightness can be set at 5 levels ( 0..10..20..30..40..50 %) and its duration can be retained for a limited (1..5..10..15..30 minutes) or unlimited time until the next operating mode change. The luminaire complies with fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol.
available accessories TOC: article 6487800 LMS HFSB/X RMC 6923500 ZBATL1 6923400 ZBMC
Accessories With horizontal wall mounting, the accessory ZBATL1 (theft protection, TOC 69 235 00) must be compulsorily installed. Specification text LED weather-proof luminaire. Compliant to DIN 10500. The luminaires are suitable for applications in IFS Version 6 and/or BRC Global Standard Food Version 7-certified companies in the food and beverage industries. Luminaire with limited surface temperature in accordance with DIN EN 60598-2-24, suitable for use in work locations exposed to fire hazards. For ceiling, wall and suspended mounting. PMMA diffuser with inner prism structure. With symmetric wide light intensity distribution. Luminaire luminous flux 6200 lm, connected load 45 W, luminous efficiency of luminaire 138 lm/W. Light colour neutral white, colour temperature 4000 K, colour rendering index Ra > 80. Service life L85 (tq 35 °C) = 50,000 h, service life L80 (tq 35 °C) = 85,000 h. Luminaire body of die-cast aluminium. Robust concept with vibration-resistant components. Permissible ambient temperature (ta): 30 °C - +35 °C. Safety class (EN 61140): I, protection rating (DIN EN 60529): IP66, impact resistance level in accordance with IEC 62262: IK04/0,5 J, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Connection devices at both face ends implemented as socket or plug, WIELAND type. Suitable connection socket and plug included in scope of supply. With electronic transformer, digitally dimmable (DALI). With through-wiring 5 x 1,5 mm². With integrated HF DALI motion sensor for specific use in trunking solutions. Can be combined with a +HFSB master luminaire or with further +HFSX sensor luminaires (max. 40) to create a complete system. Connection of up to 15 DALI luminaires possible. Function parameters of the HF motion sensor can be set with IR remote control optionally available as an accessory. The luminaire complies with fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol.
All technical data including details of weight and dimensions have been compiled with all due care. Errors excepted. Product illustrations serve as examples and may differ from the original. We reserve the right to make alterations in the interest of improving our products. © TRILUX GmbH & Co. KG 2017/09/30 APPR
