Transcript
Last Revised on: 12/23/2015
5050-LED-RGB-DD Data Sheet Item No. 5050-LED-RGB-DD LED RGB Strip 5050 SMD 5m 16.4ft | Double Density 60LED/m IP40
LED INFO ON LED STRIP
LED Density LED Count (Total) LED Type LED Ambience Operating Temperature LED Storage Temperature
18 /ft 60 /m 300 Per Reel High Quality Selected 5050 SMD -20˚F to 120˚F -13˚F to 140˚F
POWER*
Working Voltage / Input Voltage / Voltage Forward Power Consumption (Watts) Max. Current Draw / Input Current / Current Max.
12V DC
Power Drop Along the Strip (Meter) Approx.
3.14W /ft 10.31W /m 51.56W /5m Reel 4297mA 4.30A per 5m Reel 1m = 10% 5m = 23%
Power Drop with V+ In on Both Sides Approx.
1m = 6%
5m = 9%
PHOTOMETRY
Light Color Peak Wave Length (nm) Approx. Brightness (Lumen) Tested in all colors at full intensity Beam Angle UV/IR Emission Lifespan / Average Lifetime / Lumen Maintenance
Reel Total Length ( FeetSpacing | Meter)Between Centers LED (Inches | Millimeters) LED Spacing Between Edges (Inches | Millimeters) Minimum Cuttable Segments (Inches | Millimeters) Width (Inches | Millimeters) Height (Inches | Millimeters) Cable Leads (Inches | Millimeters)
RGB - Red, Green, Blue 16 Million Color Possibilities R: 625nm G: 524nm B: 471nm 245lm/ft 804lm/m 4020lm/Reel (Approx.) 120˚ None 50,000 - 75,000 Hours (50% Brightness Loss)
DIMENSIONS
16.4ft 5m
0.69in 17.50mm 0.47in 12.00mm 1.87in 47.50mm 0.39in 10mm 0.08in 2.05mm 7in 178mm
LED STRIP INFORMATION
LED Strip IP Rating LED Strip Adhesive LED Strip Finish Color / Product Color LED Strip Net Weight (Without Packaging Material) LED Strip Warranty UL Certification
Non Waterproof IP40 High Quality 3M Adhesive Copper 2.7 oz 76.54g 3 Years Limited
UL Listed; UL 2108; E479339
SIRS Electronics Inc - USA - Phone (956)522-2006 - sirs-e.com Copyright © 2006-2016 SIRS Electronics Inc. All Rights Reserved Page 1
Last Revised on: 12/23/2015
5050-LED-RGB-DD Data Sheet Item No. 5050-LED-RGB-DD (Continued) LED RGB Strip 5050 SMD 5m 16.4ft | Double Density 60LED/m IP40
PRODUCT COUNTRY OF ORIGIN
QC Quality Control Product Engineering & Design Assembled Technical Support Product Customization
USA USA China Preassembly / USA Final Assembly USA USA
INSTALLATION MATERIALS & ASSOCIATED PRODUCTS
Dimming and Color Mixing Options Max Length in One Run for Linear Lighting Power Supply DMX Programming & Stand Alone LED RGB Strip Connectors 4 Wire Installation Cables 2 Wire Installation Cables Installation Accessories Installation Kits
DMX, Radio Frequency (RF), Infrared (IR), & Analog Unlimited Thru Amplifiers or DMX Controllers Options Available Options Available Options Available Options Available Options Available Options Available Soldering Kit, Heatshrink Kit, Silicone Tube
(*) NOTES • The Strip Power Rating was measured with power input on both ends • A good technique to minimize voltage drop and increase lumen output is to power the strip on both ends. • LED electrical and optical characteristics change with the die manufacturing date. • LED performance and life span is affected by environmental conditions, manufacturing techniques, and actual component characteristics. • We reserve the right to change any data without prior notice.
M
C
! "#$ ! "#$%& ! "#$%&
-
,
W
.S
IR
,-
S-
+
E.
,-
O
'()
W
W
*+()
SIRS Electronics Inc - USA - Phone (956)522-2006 - sirs-e.com Copyright © 2006-2016 SIRS Electronics Inc. All Rights Reserved ."!/+/./ 0 &1 , , )))+ / Page 2 2+13, ."!/+/./0"1"+4
