Transcript
Disk Hang Long
Hang Canopy With Optional Harness and Motor
Product Care
20'
General Fabric and Product Care Handling • Fabric should always be handled in a clean area with clean hands and equipment. Cleaning • An Emergency Stain Treatment chart is included with each product and details how to effectively clean various types of stains. • Machine washing and/or drying is not recommended for all fabrics or constructions. Contact Moss with any questions. • Fabric may be ironed, on or off the frame. Use Permanent Press Setting and non-waxed, non-inked paper between iron and fabric. Keep iron in constant motion and avoid spandex edging. Packing & Storage • Be sure fabric is clean and dry before packing. • Roll fabric for storage. Fold inside out or face in along seams. Do not fold applied or silk-screened graphics. Pack in bag provided. • Always pack silk-screened and vinyl graphics with wax-free, ink-free paper or fabric shield to prevent its sticking to another surface. • Pack in original shipping bags. Pack bags in corrugated cardboard box for protection when shipping. Store product in a cool dry area (40º-80ºF). Emergency Stain Treatment 1. Prompt treatment of any stain is essential to successful treatment. 2. Identify the stain before you treat it. The guide on this page will assist you with treatment. 3. Use extreme care treating stains to avoid spreading the stain or creating more damage. Too much moisture can cause water stains or spread stain. 4. Treat the stain with the fabric off the frame, if at all possible. Mark the stained area with a box or tag using masking tape before removing for cleaning. This makes it easier to find the stain when the fabric comes off the frame. Stain removal will be more effective if you apply treatments from the side away from the stain (usually the inside face of the product). This is not possible with coated fabric (Coated fabric is fabric that has a sealant or wax-like surface.) and fabric constructions that have a liner. Stains on either of these must be treated from the stain side. 5. Treatment Details • Lift, scrape or blot as much of the staining material off as possible. (Blot with the provided white cloth or similar material. Avoid paper products.) • Work from the outside edges toward the center of the stain. • Masking tape can be an effective lifting device for drier materials like loose dirt, pencil and ink. • For stains not responsive to water, follow the chart above and the manufacturer’s instructions or call Moss for assistance. • Most natural stains may be treated with distilled water. • Apply water to the back of the stain, and force water through fabric by pushing on the back side while stretching the fabric, or adding water while blotting, using care to keep the wet area as small as possible. Repeat procedure until the water is running clear. • Rinse cleaners from fabric with distilled water, blotting from the outside of the stain in towards the center and dry thoroughly to avoid spreading the stain. Emergency Repair Remove clear repair tape from repair kit. Cut to desired size. Peel off backing and place over ripped area. THIS IS ONLY A TEMPORARY REPAIR.
General Stain Removal Treatments Stain
Best Cleaner ®
Alternative Solutions AMODEX®, 3% Hydrogen Peroxide
BLOOD
Shout
LOOSE DIRT FINGERNAIL POLISH
Stiff Brush
Shout®, Pre-Spot®,303 Fabric Cleaner
Denatured Alcohol
ACETONE
INK
Tape/Denatured Alcohol
AMODEX
LIPSTICK
Shout
AMODEX
OIL, GREASE
K2r
CORN STARCH & SHOUT
®
®
® ®
®
PENCIL
Tape/Denatured Alcohol
AMODEX , PRE-SPOT
FOOD/DRINK
Shout
Contact Moss
MYSTERY STAIN
Contact Moss
®
®
NOTE: NUMBER OF CABLES AND EYEBOLTS VARY ACCORDING TO SIZE OF SIGN. NOTE: MOTOR IS A SEPARATE OPTION. DOES NOT COME WITH HANGING HARNESS UNLESS SPECIFIED. NOTE: EYEBOLTS LOCATIONS VARY ACCORDING TO SIZE OF SIGN.
®
*Note: The treatments listed above are general and may not be appropriate for all fabrics. Please consult your Moss Account Team when in doubt.
DISK OPTIONAL HARDWARE
Central Harness Detail
Eyebolt Detail
TYPICAL HANGING ROTATION MOTOR
20'
General Instructions:
*Read and follow all instructions *Save instructions. *Wipe down all tubing, clean work area and lay out plastic sheeting, *Start all bolts by hand to align threads and avoid cross-threading. *Repack fabric carefully and neatly in the original fabric bag provided. *Refer to the Product Care Sheet for specific product information. *Contact Moss with any questions or concerns about your product.
Workmanship Guarantee: Moss Inc. Fully guarantees all exhibits against defects in workmanship. If our products receive proper care, but fail due to a defect in manufacturing, the exhibit will be repaired or replaced at our discretion. Damage to exhibit products caused by accidents, improper care or negligence, where Moss Inc. is not at fault - including sun degradation and wear and tear - will be repaired for a reasonable fee.
Hang Long Eyebolts Needed 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3
PARTS & TOOLS INCLUDED CURVED RAIL
EYE BOLT
Assembly/Repair & Cleaning kit
NOTE: NUMBER OF HANGPOINTS VARY ACCORDING TO SIZE AND HANGING ORIENTATION OF THE SIGN.
Diameter 2' 3' 4' 5' 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20'
Hang Canopy Eyebolts Needed 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6
Connect Curved Rails to form Disk.
EYE BOLT
Lay down supplied plastic sheeting, put on supplied gloves. Remove fabric cover from storage bag and verify proper orientation. NOTE: REFER TO FABRIC CARE PAGE AS NECESSARY. Carefully and evenly slide cover around frame. Align holes in fabric to inserts in frame. Start all zippers and zip closed. NOTE: COVER IS UNDER TENSION WHEN INSTALLED. WORK CAREFULLY. Adjust cover as necessary, sliding and rolling fabric to create proper tension Thread eyebolts though holes in cover.
NOTE: HEAVY DASHED LINES INDICATE ZIPPER PLACEMENT. START ALL ZIPPERS BEFORE ZIPPING CLOSED. NOTE: ORIENTATE HOLES IN COVER TO EYEBOLT LOCATIONS. THREAD EYEBOLTS THROUGH HOLES IN COVER.
PILLOWCASE COVER CONSTRUCTION GLOVES
C
2007
