Preview only show first 10 pages with watermark. For full document please download

Similar Pages

   EMBED


Share

Transcript

11 EMC GROUNDING For CABLES Clamps P12 P12 FG CLAMP FG CLAMP E M C グランディング EMC GROUNDING Plastic clamps with grounding function For BOARDS, ENCLOSURES Plastic fasteners with grounding function Spacers P13 FG SPACER Guide rail for PC boards P14 FG GUIDE RAIL Metal grounding components HIGH-POINT CONTACT Metal foil Wire mesh P15 P15 FG STRAP ケーブル用 P14 Straps For cables Contacts FG MESH 基板・筐体用 For PC boards and enclosures 12 FG CLAMP/FGC Plastic fastening and reliable copper foil grounding is provided simultaneously. EMC GROUNDING Feature ● Plastic body enables conductive layer to fit the cable and provides stable effectivity. Conductive area employs highly reliable copper foil. ● Plastic materials prevent the clamp from damaging the cable. ● Material 1.3 Plastic portion Conductive area ● ● Plastic portion / nylon 66( light gray / UL94V-0) Conductive area / Copper foil ( A) E D ■ B (C) Part No. 9.5 φF ■ Unit:mm M3 screw assembly type (A) B (C) D E FGC-3 R1.8  9.5 13.5 3.0 R1.5 FGC-5 R3.0 10.7 14.7 4.3 R2.0 FGC-8 R4.8 12.5 16.6 6.5 R2.3 F Applicable cable diameter φ2.7∼φ3.5 φ3.2 φ5.0∼φ5.5 φ8.2∼φ9.0 Unit:mm M4 screw assembly type Part No. (A) B (C) D E FGC-3 M4 R1.8  9.5 13.5 3.0 R1.5 FGC-5 M4 R3.0 10.7 14.7 4.3 R2.0 FGC-8 M4 R4.8 12.5 16.6 6.5 R2.3 F Applicable cable diameter φ2.7∼φ3.5 φ4.2 φ5.0∼φ5.5 φ8.2∼φ9.0 FG CLAMP/FGCS For cables FG function combined wiring clamps Feature ● Part numbers reduced through the integration of the plastic clamp and the metal FG component. Plastic and metal portions can be separated for disposal. ● Easily detachable cables allow improvement for maintenance. ● Material ● Plastic portion / nylon 66( Natural / UL94V-0) Metal portion / Phosphor bronze (Sn plating) Installation specifications (A) C ■ Metal portion (B) ■ (8.2) Plastic portion Board thickness : t0.8∼1.6 Hole diameter : φ4.8+0.2 0   Unit:mm Part No. (14.3) 2.5 For PC boards and enclosures ● (D) (A) (B) C (D) Applicable cable diameter FGCS-5 7.0 23.3 5.5 5.7 φ5.0∼φ5.5 FGCS-8 9.5 27.5 8.5 8.7 φ7.0∼φ8.5 13 FG SPACER/FGS Screw free fixing spacer is combined with EMC grounding function. ● ● Grounding at the center of the PC board is easily achieved. Suitable for total cost downsizing through high workability and reduction of part numbers. EMC GROUNDING Feature Material Plastic portion 10 5.7 ● 3.9 ● Plastic portion / PPHOX(Black / UL94V-0) Metal portion / Phosphor bronze (Sn plating) A (B) 5.5 ⓐ 5 Installation specifications 6.2 14.4 4.7 Metal portion ⓑ ⓐ:Board thickness/t=1.6∼2.0mm Hole diameter/φ4.0+0.1 0 mm ■ ⓑ:Board thickness/t=1∼2.0mm Hole diameter/φ4.8+0.1 0 mm ■   Unit:mm Part No. FGS-3S A (B) 9.8 20.3 FGS-4S 1 11.4 21.9 FGS-6S 14.4 24.9 FGS-8S 17.7 28.2 FGS-9S 20.0 30.5 For cables For PC boards and enclosures 14 FG GUIDE RAIL/FGR-80WSP Grounding function added to the PC board guide rail EMC GROUNDING Feature ● Contact fingers of the guide sandwiches the PC board so that grounding is achieved from either top or bottom face. ● Spherical profile of the contact area prevents any damage to the PC board pattern. ● Assemble using M3 screws or nylon rivets. Material ● ● Plastic portion / Polycarbonate( Black / UL94V-2) Metal portion / Phosphor bronze (Sn plating) 11.8 φ3.1 Plastic portion Installation specifications 3-φ3.1+0.1  0 2.8 6.3 Metal portion A 7.5 70±0.1 B 0.7   Unit:mm Part No. A B FGR-80WSP 70 80 HIGH-POINT CONTACT/HPC For cables Suitable for contact in large clearance applications Feature ● Special profile allows the contact clearance to vary from 10 to 20 mm. No change in spring length when compressed results in space saving. ● Assembled by screw or double-sided adhesive tape. ● Material (22) Stainless steel(SUS304/t=0.15mm) (25) φ3.2   Adhesive tape 10 For PC boards and enclosures ● ※HPC-10-20T only Unit:mm Part No. Specification HPC-10-20T Double-sided adhesive tape attached HPC-10-20 Double-sided adhesive tape un-attached 15 FG STRAP/GFGST Metal foil employed EMC grounding material ● Size variation Flexible coated metal foil allows applications in narrow space configurations. M3 A B 50 Φ 3.2 GFGST-100-8-M3 100 Φ 3.2 GFGST-150-8-M3 150 Φ 3.2 50 Φ 4.2 GFGST-100-8-M4 100 Φ 4.2 GFGST-130-8-M4 130 Φ 4.2 GFGST-150-8-M4 150 Φ 4.2 GFGST-220-8-M4 220 Φ 4.2 GFGST-50-8-M4 Material ①Copper foil / Tough Pitch Copper (t0.1mm) ● ② Heat shrink tubing / Polyolefin Structure Part No. GFGST-50-8-M3 M4 ● EMC GROUNDING Feature Impedance characteristics Unit:Ω Properties (MHz) Frequency GFGST-50-8-M3 GFGST-100-8-M3 0.28 ● Surface resistance …… 0.021 (Value shown was measured with GFGST-50-8-M3 between both terminal ends) 1 0.13 25 3.19 7.01 100 12.79 28.38 500 72.03 225.57 ※All specifications and characteristics shown herein are typical values, but are not guaranteed. ※All specifications and characteristics shown herein are subject to change without notice for improvements or changes in specification. FG MESH/FGM For cables Metal mesh employed EMC grounding material Feature ● ● Excellent flexible structure comprises metal wires braided into a cylinder mesh, coated with insulator. Large surface area of conductive mesh provides excellent impedance characteristics in the high frequency range. Material ■ Part No. ● FGM-50-M3 Metal mesh C ■ (B) Coating Terminal (B) 100 FGM-150-M3 150 FGM-200-M3 200 8.5 A 2.5 Unit:mm M4 screw assembly type Part No. C 50 FGM-100-M3 FGM-50-M4 A A (B) C 50 FGM-100-M4 100 FGM-150-M4 150 FGM-200-M4 200 8.5 2.5 ※Please contact our sales department for sizes outside of those specified. For PC boards and enclosures Mesh / Tinned copper wire ● Terminal / Round terminal ● Coating / Heat shrink tube (black) Unit:mm M3 screw assembly type