Transcript
Panel PCs
PB600/H1 Embedded & Industrial PCs INTERNATIONAL PRODUCTS AND CONFIGURATIONS PB600/H1 BASIC SYSTEM
Intel Celeron M 1.5GHz 256 MB RAM kit HDD 40GB 2.5" SATA No FDD Power supply 220V/AC
PB600/H1 basic configuration
Ð Intel Celeron M 1.5 GHz, 400MHz front side bus, 1MB cache socket 478 μFC-PGA CPU
Intel Pentium M 1.73 GHz, 533MHz front side bus, 2MB cache socket 478 μFC-PGA Intel Pentium M 2 GHz, 533MHz front side bus, 2MB cache socket 478 μFC-PGA
Ð 256 MB 1 SODIMM module DDR2 PC4300 RAM MEMORY
512 MB 1 SODIMM module DDR2 PC4300 1 GB 1 SODIMM module DDR2 PC4300 2 GB 2 SODIMM modules DDR2 PC4300, 1 GB each
Ð No Kit Hard Disk HARD DISK
Kit HDD 40GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 60GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 2.5" SATA 5400rpm, 8 MB buffer
Ð POWER SUPPLY
110÷220V/AC 140W, autoranging 18÷36V/DC 140W, autoranging
Ð ETHERNET PORTS
2 x 10/100Mbit RJ45 connector 1 x 10/100Mbit, 1 x 10/100/1000Mbps RJ45 connector
Ð Additional serial port (3rd) RS-232/422/485 DB15 male connector > see annotation 1 Additional serial port (3rd) RS-232/422/485 RS-422/485 optoisolated DB15 male connector > see annotation 1 Parallel port SPP-EPP-ECP bidirectional DB25 male connector > see annotation 1 OPTIONS
Fieldbus module NETCORE® > see annotation 2 Warranty extension to 18 months + 1 month exemption on basic system and its variants Warranty extension to 24 months + 1 month exemption on basic system and its variants
ANNOTATIONS
1: Additional serial ports RS-232/422/485 and parallel port can be installed alternatively one to the other only 2: For fieldbus module NETCORE® specifications see page 107 of Poducts and Configurations dated November 8th, 2006
PB600/H1 BASIC SYSTEM TECHNICAL SPECIFICATIONS Case
DIN rail mount
Overall dimensions & weight
See details on the rear
Motherboard
"All-In-One" type ASEM 921 with watchdog timer, hardware system for temperature and voltage board diagnostics
Video controller
Integrated on-board, VGA standard analog interface (external port) and LVDS digital interface for TFT LCD (internal socket) Simul Scan
Video memory (shared)
64/128 MB selectable in system setup
RAM memory sockets
2 x SODIMM modules, 200 pin
RAM memory
DDR2-533 type PC4300 low profile
Minimum system memory
256 MB
Maximum system memory
2 GB
Mass storage interfaces
1 x FDD 1 x ATA/100 (Master, Slave) 2 x SATA/150
Solid State Disk interface
1 x Compact Flash type II slot, rear access
On-board options predisposition
Additional serial port (3rd) predisposition (see OPTIONS)
Bus expansions slots
Not available
Rear access interfaces
2 x PS/2 (K/M) 2 x Ethernet 10/100Mbit RJ45 connector 4 x USB (2 x 2.0) standard-A connector 1 x analog VGA DB15 female connector
Rear access serial interfaces
2 x RS-232 DB9 male connector
Fieldbus interfaces
NETCORE® fieldbus module predisposition (see OPTIONS) > see annotation 2 at previous page
Environmental specifications
Operating temperature: 0 ÷ +50°C without HDD, 0 ÷ +45°C with HDD Storage temperature: -20 ÷ +60°C Humidity: 80% (non-condensing)
Standard warranty
12 months + 1 month exemption warranty management by ASEM headquarters
26/03/2007
Panel PCs
PB600/H1 PB600/H1-TE OVERALL DIMENSIONS (mm)
34.5
FRONT VIEW
REAR VIEW
326.5
355
34.5 14
173.5
175
236 26
13
22 Weight 4.8kg
26/03/2007
236.5
238
13
352
311
10 1
69.5
14
SIDE VIEW
22 60.5
Panel PCs
PB600/H3 Embedded & Industrial PCs INTERNATIONAL PRODUCTS AND CONFIGURATIONS PB600/H3 BASIC SYSTEM
PB600/H3 basic configuration
Intel Celeron M 1.5GHz 256 MB RAM kit HDD 40GB 2.5" SATA No FDD Power supply 220V/AC 2 slots PCI
Ð Intel Celeron M 1.5 GHz, 400MHz front side bus, 1MB cache socket 478 μFC-PGA CPU
Intel Pentium M 1.73 GHz, 533MHz front side bus, 2MB cache socket 478 μFC-PGA Intel Pentium M 2 GHz, 533MHz front side bus, 2MB cache socket 478 μFC-PGA
Ð 256 MB 1 SODIMM module DDR2 PC4300 RAM MEMORY
512 MB 1 SODIMM module DDR2 PC4300 1 GB 1 SODIMM module DDR2 PC4300 2 GB 2 SODIMM modules DDR2 PC4300, 1 GB each
Ð No Kit Hard Disk Kit HDD 40GB 2.5" SATA 5400rpm, 8 MB buffer HARD DISK
Kit HDD 60GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 3.5" SATA 7200rpm, 8 MB buffer Kit HDD 160GB 3.5" SATA 7200rpm, 8 MB buffer
Ð POWER SUPPLY
110÷220V/AC 140W, autoranging 18÷36V/DC 140W, autoranging
Ð 2 x PCI half size on riser card EXPANSION SLOTS
2 x PCI half size on riser card with predisposition for 32-bit, 512KB max NOVRAM 1 x PCI, 1 x PCI-Express x1 format half size on riser card
Ð ETHERNET PORTS
2 x 10/100Mbit RJ45 connector 1 x 10/100Mbit, 1 x 10/100/1000Mbps RJ45 connector
Ð Kit FDD 3.5" 1.44 MB H=1" white bezel > see annotation 1 Kit CD-ROM E-IDE 24x Slim H=0.5" black bezel Kit COMBO DVD-ROM E-IDE 24x / CD-RW 24x10x24x Slim H=0.5" black bezel FDD/CD/DVD REAR ACCESS
Kit DVD-RW E-IDE 8x4x24x10x Slim H=0.5" black bezel Kit FDD 3.5" 1.44 MB Slim + CD-ROM E-IDE 24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + COMBO E-IDE DVD-ROM 24x / CD-RW 24x10x24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + DVD-RW E-IDE 8x4x24x10x Slim H=1" black bezel
Ð Additional serial port (3rd) RS-232/422/485 DB15 male connector > see annotation 1 Additional serial port (3rd) RS-232/422/485 RS-422/485 optoisolated DB15 male connector > see annotation 1 Parallel port SPP-EPP-ECP bidirectional DB25 male connector > see annotation 1 OPTIONS
Fieldbus module NETCORE® > see annotation 2 Warranty extension to 18 months + 1 month exemption on basic system and its variants Warranty extension to 24 months + 1 month exemption on basic system and its variants
ANNOTATIONS
1: Standard height (1") FDD can be installed as an alternative to the slim units only 2: Additional serial ports RS-232/422/485 and parallel port can be installed alternatively one to the other only 3: For fieldbus module NETCORE® specifications see page 107 of Poducts and Configurations dated November 8th, 2006
TECHNICAL SPECIFICATIONS: see next page DDD
26/03/2007
Panel PCs
PB600/H3 PB600/H3 BASIC SYSTEM TECHNICAL SPECIFICATIONS Case
DIN rail mount
Overall dimensions & weight
See details on the rear
Motherboard
"All-In-One" type ASEM 921 with watchdog timer, hardware system for temperature and voltage board diagnostics
Video controller
Integrated on-board, VGA standard analog interface (external port) and LVDS digital interface for TFT LCD (internal socket) Simul Scan
Video memory (shared)
64/128 MB selectable in system setup
RAM memory sockets
2 x SODIMM modules, 200 pin
RAM memory
DDR2-533 type PC4300 low profile
Minimum system memory
256 MB
Maximum system memory
2 GB
Mass storage interfaces
1 x FDD 1 x ATA/100 (Master, Slave) 2 x SATA/150
Solid State Disk interface
1 x Compact Flash type II slot, rear access
On-board options predisposition
Additional serial port (3rd) predisposition (see OPTIONS)
Bus expansions slots
2 x PCI
Rear access interfaces
2 x PS/2 (K/M) 2 x Ethernet 10/100Mbit RJ45 connector 4 x USB (2 x 2.0) standard-A connector 1 x analog VGA DB15 female connector
Rear access serial interfaces
2 x RS-232 DB9 male connector
Fieldbus interfaces
NETCORE® fieldbus module predisposition (see OPTIONS) > see annotation 3 at previous page
Environmental specifications
Operating temperature: 0 ÷ +50°C without HDD, 0 ÷ +45°C with HDD Storage temperature: -20 ÷ +60°C Humidity: 80% (non-condensing)
Standard warranty
12 months + 1 month exemption warranty management by ASEM headquarters
PB600/H3-TE OVERALL DIMENSIONS (mm)
34.5
FRONT VIEW
REAR VIEW
326.5
14
355
SIDE VIEW
101 14
26
13
242
13 22 352 weight 6.4kg
26/03/2007
63
173.5
175
236
69.5
38
311
22 117
Panel PCs
PB600/H4 Embedded & Industrial PCs INTERNATIONAL PRODUCTS AND CONFIGURATIONS PB600/H4 BASIC SYSTEM
PB600/H4 basic configuration
Intel Celeron M 1.5GHz 256 MB RAM kit HDD 40GB 2.5" SATA No FDD Power supply 220V/AC 4 slots PCI
Ð Intel Celeron M 1.5 GHz, 400MHz front side bus, 1MB cache socket 478 μFC-PGA CPU
Intel Pentium M 1.73 GHz, 533MHz front side bus, 2MB cache socket 478 μFC-PGA Intel Pentium M 2 GHz, 533MHz front side bus, 2MB cache socket 478 μFC-PGA
Ð 256 MB 1 SODIMM module DDR2 PC4300 RAM MEMORY
512 MB 1 SODIMM module DDR2 PC4300 1 GB 1 SODIMM module DDR2 PC4300 2 GB 2 SODIMM modules DDR2 PC4300, 1 GB each
Ð No Kit Hard Disk Kit HDD 40GB 2.5" SATA 5400rpm, 8 MB buffer HARD DISK
Kit HDD 60GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 3.5" SATA 7200rpm, 8 MB buffer Kit HDD 160GB 3.5" SATA 7200rpm, 8 MB buffer
Ð POWER SUPPLY
110÷220V/AC 140W, autoranging 18÷36V/DC 140W, autoranging
Ð 4 x PCI half size on riser card EXPANSION SLOTS
4 x PCI half size on riser card with predisposition for 32-bit, 512KB max NOVRAM 3 x PCI, 1 x PCI-Express x1 format half size on riser card
Ð ETHERNET PORTS
2 x 10/100Mbit RJ45 connector 1 x 10/100Mbit, 1 x 10/100/1000Mbps RJ45 connector
Ð Kit FDD 3.5" 1.44 MB H=1" white bezel > see annotation 1 Kit CD-ROM E-IDE 24x Slim H=0.5" black bezel Kit COMBO DVD-ROM E-IDE 24x / CD-RW 24x10x24x Slim H=0.5" black bezel FDD/CD/DVD REAR ACCESS
Kit DVD-RW E-IDE 8x4x24x10x Slim H=0.5" black bezel Kit FDD 3.5" 1.44 MB Slim + CD-ROM E-IDE 24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + COMBO E-IDE DVD-ROM 24x / CD-RW 24x10x24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + DVD-RW E-IDE 8x4x24x10x Slim H=1" black bezel
Ð Additional serial port (3rd) RS-232/422/485 DB15 male connector > see annotation 1 Additional serial port (3rd) RS-232/422/485 RS-422/485 optoisolated DB15 male connector > see annotation 1 Parallel port SPP-EPP-ECP bidirectional DB25 male connector > see annotation 1 OPTIONS
Fieldbus module NETCORE® > see annotation 2 Warranty extension to 18 months + 1 month exemption on basic system and its variants Warranty extension to 24 months + 1 month exemption on basic system and its variants
ANNOTATIONS
1: Standard height (1") FDD can be installed as an alternative to the slim units only 2: Additional serial ports RS-232/422/485 and parallel port can be installed alternatively one to the other only 3: For fieldbus module NETCORE® specifications see page 107 of Poducts and Configurations dated November 8th, 2006
TECHNICAL SPECIFICATIONS: see next page DDD
26/03/2007
Panel PCs
PB600/H4 PB600/H4 BASIC SYSTEM TECHNICAL SPECIFICATIONS Case
DIN rail mount
Overall dimensions & weight
See details on the rear
Motherboard
"All-In-One" type ASEM 921 with watchdog timer, hardware system for temperature and voltage board diagnostics
Video controller
Integrated on-board, VGA standard analog interface (external port) and LVDS digital interface for TFT LCD (internal socket) Simul Scan
Video memory (shared)
64/128 MB selectable in system setup
RAM memory sockets
2 x SODIMM modules, 200 pin
RAM memory
DDR2-533 type PC4300 low profile
Minimum system memory
256 MB
Maximum system memory
2 GB
Mass storage interfaces
1 x FDD 1 x ATA/100 (Master, Slave) 2 x SATA/150
Solid State Disk interface
1 x Compact Flash type II slot, rear access
On-board options predisposition
Additional serial port (3rd) predisposition (see OPTIONS)
Bus expansions slots
4 x PCI
Rear access interfaces
2 x PS/2 (K/M) 2 x Ethernet 10/100Mbit RJ45 connector 4 x USB (2 x 2.0) standard-A connector 1 x analog VGA DB15 female connector
Rear access serial interfaces
2 x RS-232 DB9 male connector
Fieldbus interfaces
NETCORE® fieldbus module predisposition (see OPTIONS) > see annotation 3 at previous page
Environmental specifications
Operating temperature: 0 ÷ +50°C without HDD, 0 ÷ +45°C with HDD Storage temperature: -20 ÷ +60°C Humidity: 80% (non-condensing)
Standard warranty
12 months + 1 month exemption warranty management by ASEM headquarters
PB600/H4-TE OVERALL DIMENSIONS (mm)
34.5
FRONT VIEW
REAR VIEW
326.5
14
355
SIDE VIEW
69.5
38
63
173.5
175
236 26
13
242
13 22 352 Weight 8kg
26/03/2007
175
14
311
22
117
