Similar Pages

Transcript

ARTEMIS acdc1032 A compact, exterior, fully submersible , discrete, triple LED marker light & wallwash luminaire, delivering 350lm. IP68 1 B SPG305 Jun 2015 2 ARTEMIS acdclighting.com/LED/ARTEMIS CONTENTS 3 Product overview 05 Application images 07 Detailed product performance 09 Product drawings and images 10 Specification codes 11 Driver options 13 Installation instructions 15 Specification sheet 17 Contact details 16 4 ARTEMIS acdclighting.com/LED/ARTEMIS OVERVIEW A compact, exterior, fully submersible , discrete, triple LED marker light & wallwash luminaire, delivering 350lm. IP68 Beam control for different features or specific details Available with clear glass for maximum output or frosted glass for minimal glare Aluminium CNC machined to aerospace tolerances Suitable for installation in the most challenging of exterior environments High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70 This product is dual binned within a 2 step MacAdam ellipse to ensure colour consistency A range of optics is available to suit every application: 12°, 18°, 30°, 50° Choice of colour finishes available: stainless steel brushed. Extremely durable anodised aluminium silver, anodised aluminium black. For especially demanding environments use hard anodised silver, hard anodised black, chlorine anodised silver, chlorine anodised black Suitable for use in ambient temperatures ranging from -20ºC to 50ºC IP68 5 6 ARTEMIS acdclighting.com/LED/ARTEMIS APPLICATION IMAGES GPO Westin. Sydney, Australia. Lighting Design: Point of View. Distribution partner: JSB Lighting. acdc LED product: ARTEMIS (acdc1032) 7 Finningeröndellen, Sweden. Lighting Design: Andreas Ejhed, Ljusarkitektur. Distribution partner: Rebel Light. acdc LED product: ARTEMIS (acdc1032) 8 ARTEMIS acdclighting.com/LED/ARTEMIS PRODUCT PERFORMANCE PRODUCT DRAWINGS & IMAGES ARTEMIS LED Type LED Quantity Drive Current Power Consumption. Including 85% Efficient Driver PFC Colour Temp Initial Colour Accuracy Colour Stability Over Life. Measured at 6000hrs CRI Initial Lamp Lumen Output Initial Lamp Lumens per Circuit Watt Lamp Pro e t 1 Lumen Output including Thermal & Optical Losses 06 4 Lamp Lumens (Including Thermal & Optical Losses) per Circuit Watt Luminaire Lumen Output U i ed i g o Luminaire Lumens per Circuit Watt Lifetime L70. Based on TM-21 Lumen Depreciation LIF Cat/Codes for % depreciation at 10,000hrs Cree 3 700mA(*SSB finish variant max 350mA) 7.7W Driver dependent (Typical 0.9) 2700ºK 3000ºK 4200ºK 6000ºK 2 Step MacAdam Ellipse 2 Step MacAdam Ellipse 80 80 80 80 390 438 471 521 51 57 61 68 331 372 400 443 43 48 52 58 311 331 342 361 40.39 42.99 44.42 46.88 >50,000 hours Cat1/Code9 Lamps on12° 1 x 3 x LE Based ARTEMIS ARTEMIS - Angle of adjustment 65mmØ 0º 16 60mm 97mm Based on 3000ºK and 12° ARTEMIS - Wall bracket (1:1 scale) 5.2mm UX TSI All acdc products are independently tested in line with LM80 standards, 50,000 hours lifetime with lumen maintenance at L70 to guarantee product performance. Output data figures stated are typical values. 25.4mm 50.8mm To download photometric files please visit www.acdclighting.co.uk/led/ARTEMIS 9 10 ARTEMIS acdclighting.com/LED/ARTEMIS SPECIFICATION CODES Finishes Anodised Aluminium Silver Stainless Steel Brushed Anodised Aluminium Black Hard Anodised Silver Chlorine Anodised Silver Hard Anodised Black Chorline Anodised Black LED Colour 2700°K 3000°K 4200°K 6000°K RED GREEN BLUE AMBER RGB Optics 12º 18º 30º 50º ARTEMIS acdc1032 / AAS / 30 / 18R ARTEMIS, Anodised Aluminium Silver, 3000°K, 18° Finishes Anodised Aluminium Silver Anodised Aluminium Black Stainless Steel Brushed Hard Anodised Silver* Hard Anodised Black* Chlorine Anodised Silver* Chlorine Anodised Black* AAS AAB SSB HAS HAB CAS CAB LED Colour 2700ºK 3000ºK 4200ºK 6000ºK Red Green Blue Amber RGB 27 30 42 60 R G B A RGB Optics 12° 18° 30° 50° 12R 18R 30R 50R Additional option 100mm Garden Spike Emergency Pack For an emergency conversion pack please specify acdc1702 acdc1957 *Upon request. Minimum order quantity applies. ARTEMIS acdclighting.com/LED/ARTEMIS DRIVER OPTIONS Switched Switched ARTEMIS Driver Code Dimensions Weight Input Voltage Current Power Consumption Dimming Range Channels Number of products driven per driver Live Neutral Images are for illustrative purposes only. 1-10v acdc1900/A/700/SWT/None 110 x 52 x 23.5 mm 100g 110-240Vac 700mA 20W @ 230V None 1 acdc1900/B/700/SWT/None 180 x 32 x 32 mm 120g 220 - 240Vrms 700mA 33W None 1 1 2-4 1-10v ARTEMIS Driver Code Dimensions Weight Input Voltage Current Power Consumption Dimming Range Channels Number of products driven per driver Live Neutral 1-10v Dimmer Images are for illustrative purposes only. Phase acdc1900/A/700/1-10/Solo 110 x 52 x 23.5 mm 100g 110-240Vac 700mA 20W @ 230V 0%-100% 1 acdc1900/B/700/1-10/Solo` 180 x 32 x 32 mm 120g 220 - 240Vrms 700mA 33W None 1 1 2-4 Phase ARTEMIS Live Neutral Driver Code Dimensions Weight Input Voltage Current Power Consumption Dimming Range Channels Number of products driven per driver Dimmer Images are for illustrative purposes only. DALI acdc1900/A/700/Pha/None 99mm x 39mm x 23.5mm 70g 230-240V AC 700mA 10.5W max Min 20% 1 acdc1900/B/700/PHA/None 244 x 58 x 42 mm 240 gram 230 Volt +/- 10% 700 33.6W Depends on dimmer capabilities 1 1-4 LED's 2-4 DALI ARTEMIS Live Neutral Driver Code Dimensions Weight Input Voltage Current Power Consumption Dimming Range Channels Number of products driven per driver Dali Bus Isolated Dali Interface Images are for illustrative purposes only. DMX acdc1900/A/700/Dali/Solo 210 x 40.4 x 33.5mm 225g AC 120-277V / DC 120-250V 700mA 30w 0%-100% 1 acdc1900/C/700/DALI/Solo 180 x 32 x 32 mm 120g 220 - 240Vrms 700mA 30W Off, 10%-100% 1 1 2-4 DMX Live Neutral Ground DMX in DMX in + DMX in shield 13 3 LED Groups 3 Control Channels ARTEMIS All images shown above are for illustrative purposes only. Please refer to installation instructions for complete details Driver Code Dimensions Weight Input Voltage Current Power Consumption Dimming Range Channels Number of products driven per driver acdc1900/E/700/DMX/Multi 388 x 42 x 30 mm 705 g 120 - 277 VAC 700 100W max 0.1%-100% 3 12 per Ch x 3ch 14 ARTEMIS acdclighting.com/LED/ARTEMIS INSTALLATION INSTRUCTIONS 1 2 5.2mm 25.4mm 50.8mm 3 • Only to be installed by a qualified electrician • Installation must be carried out in accordance with local regulations • Turn off mains power to the driver during installation and any subsequent dis-connecting or re-connecting at the fitting • Use correct polarity when wiring. If in any doubt contact the installation helpline +44 (0) 845 862 6400 • Do not cover the luminaires or drivers with thermal insulation or vapour barrier (see air space guidance) • acdc luminaires are designed for lighting applications and must not be used for any other purpose acdc1702 5 4 A B Artemis Artemis RGB A B 2000mm 2000mm 0.5mm2 0.22mm2 + Clear/cotton Red Ch1 Clear Black + Green Ch2 - + Yellow Blue Ch3 White IP68 IP68 IP68 acdclighting.com/LED/ARTEMIS Specification sheet ARTEMIS acdc1032 A compact, exterior, fully submersible , discrete, triple LED marker light & wallwash luminaire, delivering 350lm. IP68 ARTEMIS Front view Angles of adjustment Bracket 65mmØ 97mm 60mm 0º 16 5.2mm 25.4mm 50.8mm Luminaire Performance Material: Aluminium CNC machined to aerospace tolerances. Finish: stainless steel brushed. Extremely durable anodised aluminium silver, anodised aluminium black. For especially demanding environments use hard anodised silver*, hard anodised black*, chlorine anodised silver*, chlorine anodised black* Beam angles: 12°, 18°, 30°, 50º. Accessories: Garden spike (100mm) Installation: Suitable for installation in the most challenging of exterior environments. Temperature range: From -20ºC to 50ºC *Upon request. Minimum order quantity applies. Lumen Maintenance: High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70. Initial lamp Lumen output*: 438lm Lamp lumens inc thermal and optical losses*: 372lm Luminaire Lumens output*: 331lm Power consumption (inc 85% efficient driver): 7.7W Efficacy (Lm/W)*: 43 CRI: 80 Binning: Dual binned for optimum colour consistency across a project - 2 step MacAdam ellipse. LED Colour: 2700ºK, 3000ºK, 4200ºK, 6000ºK, R, G, B, A, RGB Driver: Switched, 1-10v, Phase, Dali, DMX Listings: CE, ETL us/c IP rating: IP68 Warranty: 5 years Weight: Stainless steel 1010g, aluminium 600g *Based on 3000ºK with 12º optics Specification Codes Product acdc1032 Driver options Bezel Finishes Anodised aluminium silver LED Colour AAS Optics Driver 2700ºK 27 12º 12R 3000ºK 30 18º 18R Anodised aluminium black AAB 4200ºK 42 30º 30R Stainless steel brushed SSB 6000ºK 60 50º 50R Hard anodised silver HAS R R Hard anodised black HAB G G Chlorine anodised silver CAS B B Choline anodised black CAB A A RGB RGB acdc1032 acdc1900 No. of Luminaires if known Current 700mA Dimming Type SWT 1-10 Phase DALI DMX acdc1900 700mA Ground spike 100mm - acdc17020 This acdc product is • Dual binned within a 2 step MacAdam ellipse to guarantee colour consistency • Supplied with a 5 year guarantee IP68 Specification subject to change without notice. Refer to our website for the most recent product documentation. acdclighting.com | [email protected] | UK: +44 (0) 845 862 6400 | USA: +1 (410) 220 0088 | Dubai: +971 (0)4 3617365 B SPG305 Jun 2015 ARTEMIS acdclighting.com/LED/ARTEMIS CONTACT Head Office Wordsworth House Vantage Court, Riverside Way Barrowford Lancashire UK BB9 6BP Tel: +44 (0) 845 862 6400 Fax: +44 (0) 845 862 6401 Email: [email protected] Manufacturing Innovation Works Gisburn Road Barrowford Lancashire UK BB9 8NB Tel: +44 (0) 845 862 6400 London Studio Ground Floor Central Block Green Mews Bevenden Street London N1 6AS Sales Tel: +44 (0) 845 862 6400 Deliveries Tel: +44 (0) 845 862 6458 Email: [email protected] Dubai Office Office 405, Goldcrest Executive Tower Cluster C - Jumeirah Lakes Towers (JLT) P.O. Box 643811 Dubai United Arab Emirates Tel: +971 (0) 4 3617365 Email: [email protected] USA Office acdc corp, 841 E Fort Ave, #276 Baltimore, MD 21230 USA Tel: +1 (410) 220 0088 Email: [email protected] Global Distribution Network We have an established and growing global network of over 60 distributors and consider them a vital extension to our British, Dubai and North American based export teams. This ensures that all customers receive the same outstanding level of world-class service and knowledge regardless of the location of your project. For contact details of our distribution partners, please visit acdclighting.com/contact/distribution-network/ or contact [email protected] Specification subject to change without notice. Refer to our website for the most recent product documentation.