Transcript
WYRESTORM PRODUCT SPECIFICATION SHEET
50m (164ft) HD over SDI Cascading Receiver with 2-Way IR & RS232 RX-SDI-50
Key Features: • • • •
SDI loop out on receiver allows transmission to be cascaded up to 7 times to further lengthen distribution Full 1080p, full 3D and HD audio compatible Embedded audio / video SETTING functionality assists communication between source/display and avoids compatibility issues 2-way IR and serial control
The WyreStorm RX-SDI-50 is single cable HDMI over SDI cascading display receiver capable of receiving transmissions of lossless 1080p HD video@60Hz and multi-channel HD audio up to 50m (164ft) using copper-core 75Ohm coax from a compatible transmission device, such as the TX-SDI-50 transmitter as part of the EX-SDI-50 extender set. Featuring full 3D compatibility and 24bit True Color with wide-band, two-way control from either source or display location via IR and RS232 with full support for leading third party control systems, the RX-SDI-50 also includes SDI Loop out that enables up to 7 receivers to be daisy-chained for a total distribution of up to 350m/1148ft from a single output.
Additional Features & Benefits: • • • • •
1080p transmission distance up to 50m/164ft (75Ohm WF100 coax cable) under perfect conditions* Full HD support 1080p@50/60Hz, 24bit colour depth Wide-band, bidirectional infrared control signal of source from display and display from source locations transmitted together with the HDMI signal RS232 control signal transmissions supported Cascade up to 7 receivers via SDI Loop to further lengthen distribution from a single output distances up to 350m/1148ft or 700m/2296ft from both synchronous outputs of a connected TX-SDI-50 transmitter
• •
Features HDMI V1.4 and HDCP support Auto-adjustment of feedback, equalization and amplification with ESD protection to safeguard against static build-up that can damage circuitry
*Perfect transmission conditions denote - straight cable run within specified distance range of product, no electrical interference and the use of solid copper core cable with no bends or joins. Please be advised that the presence of any of these factors in your installation may compromise bandwidth and signal strength.
in the box 1 x RX-SDI-50 Receiver 1 x Printed user manual
1 x 5V/3A DC power supplies (for each unit) 1 x IR RX receiver (for connection to display)
(downloadable from product web page)
US OFFICE:
EMEA OFFICE:
TEL: +1 901 384 3575
TEL: + 44 (0) 1793 230 343
FAX: +1 901 384 3574
FAX: + 44 (0) 1793 230 583
WYRESTORM PRODUCT SPECIFICATION SHEET
SPECIFICATIONs Operating Temperature Range
-5 to +35°C (-41 to +95 °F)
Operating Humidity Range
5 to 90 % RH (no condensation)
Video Amplifier Bandwidth
6.75Gbps
Input Video Signal
0.5-1.0 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Video Format Supported
DTV/HDTV: 640x480P 60Hz, 800x600 60Hz, 1024x768 60Hz,
1280x768 60Hz, 1360x768 60Hz, 1280x960 60Hz, 1280x1024 60Hz, 1400x1050 60Hz, 1440x480i 60Hz, 720x480p 60Hz, 1440x576i 50Hz, 720x576p 50Hz, 1440x576p 50Hz, 1280x720p 5060Hz, 1920x1080i 50/60Hz, 1920x1080p 24/25/30/50/60Hz, 1280x720p 3D 50/60Hz,
1920x1080i 3D 50/60Hz, 1920x1080p 3D 24Hz
Output Video HDMI1.4+HDCP Output Audio 5.1 / 7.1 / stereo audio (Including PCM and non PCM, HD AUDIO, etc) Maximum Transmission Distance
50 meters (164ft) (WF100 coax cable)
Power Supply
5V/3A DC
Power Consumption
8W
Dimensions (WxHxD)
118mm/4.6” x 25mm/0.98” x 157mm/6.2”
Mass (Main unit)
0.46Kg / 1.01lb
SOURCE DEVICE
ir Link CABLE
Control System
5V POWER
5V POWER
Control System
Control System
5V POWER
Control System
5V POWER
Key
Control System
5V POWER
ir tx ir rx Coax hdmi
For additional product information visit www.wyrestorm.com For technical support contact: US: +1 866 677 0053 EMEA: +44 (0) 1793 230 343
5V POWER
Control System
Control System
