Transcript
Installation Instructions for 7800/8200 Mortise Lock 50- Prefix/185S Kit Secured Indicator Rose FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 / www.sargentlock.com
INSIDE OF DOOR
TEMPLATE LAYOUT ON DOOR EDGE
OUTSIDE OF DOOR
CENTERLINE OF LOCKBODY
2-1/2”
PATENT PENDING
FOLD HERE ACCORDING TO DOOR HAND AND BEVEL CENTERLINE OF LOCKBODY
TOP
LOW SIDE OF DOOR INSIDE RHRB OUTSIDE LH
2-3/4”
1-3/8”
2-1/2”
NO BEVEL DOOR HIGH SIDE OF DOOR INSIDE RH OUTSIDE LHRB
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
A7671:A 11-15-10
CYLINDER
1/2” DIA. HOLE
LEVER OR KNOB
Installation Instructions for 7800/8200 Mortise Lock 50- Prefix/185S Kit Secured Indicator Rose FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 / www.sargentlock.com 7 6
5
4
9
10 8
3
2 OVO CAC CCC
1
Item Description Qty. 1 Indicator Housing 1
Part Number 82-0604
77-1195
2
3
4
82-4051 82-4050
5
7
INSTRUCTIONS FOR CHANGING INDICATOR SLIDES 1. REMOVE PHILIPS SCREW.
6 8
2. REMOVE BACK PLATE, HUB PLATE AND SLIDE. 3. REPLACE WITH ALTERNATE SLIDE. 9 NOTE: CHECK FOR PROPER ORIENTATION OF VAC/OCC SLIDE TEXT. 4. REASSEMBLE HUB PLATE AND BACK PLATE, SECURE WITH 10 PHILIPS SCREW.
Spindle Hub
1
Red/White Slide
1
Spindle
1
VAC/OCC Slide
1
Hub Plate
1
Back Plate
1
#6-32 x 3/16” MS
1
Mounting Adapter
Mounting Post, 185S-1, 1-3/8” Door Mounting Post, 185S-2, 1-3/4” Door Mounting Post, 185S-3,
2” Door
Mounting Post, 185S-4, 2-1/4” Door Torx Screw
1 2 2 2 2 1
82-0605 82-4050 82-4051 82-0590 82-0606 01-4553 91-2151 81-0017 81-0723 92-0069 82-0539 01-1421
FOLD HERE ACCORDING TO DOOR HAND AND BEVEL CENTERLINE OF LOCKBODY
2-1/2”
LEVER OR KNOB
2-3/4”
NO BEVEL DOOR CYLINDER
TOP
1/2” DIA. HOLE
1-3/8”
LOW SIDE OF DOOR INSIDE LHRB OUTSIDE RH
HIGH SIDE OF DOOR INSIDE LH OUTSIDE RHRB
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
A7671:A 11-15-10
