Transcript
Moixa Energy Ltd Archer Street Studios, Unit 9 10-11 Archer Street London, W1D 7AZ
www.usbcell.com
Email:
[email protected]
PRODUCT DATASHEET USBCELL MXAA02-1
Typical Charge via USB: 1.8
Steady Charge
1.7 1.6 Voltage/V
AA/R6 Standard Dimensions
1.4 1.3 1.2
14.50 13.50
5.5 max.
1.5
Pulsed Charge >90% Full (or After ~320 mins.)
1.1 1 0.9
50.50 49.20
1.00 min.
0
1
2
3
4 Time/h
5
6
7
Typical Charge Characteristics: 1.8
625 mA (0.5C)
1.7
7.00 min.
Specifications
Voltage/V
all dimensions are in mm NOT TO SCALE
1.5 1.4
1.2
AA or R6
Chemical System:
Sealed Nickel-Metal Hydride (NiMH)
1.1
Typical Weight:
22 grams
1 0.9
Operating and Storage Temperature Limits: Storage: Humidity:
0
-20ºC to 35ºC 65±20%
- Operating batteries outside these temperature ranges may reduce cycle life. - NiMH cells will lose charge over time when stored. Nominal Voltage:
125 mA (0.1C)
1.3
Designation:
0ºC to 40ºC Charge: Discharge: -10ºC to 40ºC
250 mA (0.2C)
1.6
2
4
6
8 10 Time/h
12
14
16
Typical Discharge Characteristics: 1.5
1.2 Volts
Typical Capacity: 1300 mAh Recommended Charge: 250mA
1.4
250 mA (0.1C)
Voltage/V
Typical Internal Impedance: <35 milliohms @ 1kHz General: The USBCELL should never be used in a situation likely to cause a hazard; refer to the user help section of the usbcell.com website for general use instructions.
1.3
1.2
900 mA (0.7C) 1.1
625 mA (0.5C)
For recycling instructions refer to the usbcell.com website. The sealed Ni-MH battery component which powers the USBCELL complies with UL 2054, BBET2 category.
1 0
1
2
3
4
Time/h
IMPORTANT NOTICE The USBCELL should only be used in accordance with recommended use instructions. Refer to usbcell.com This data sheet presents information specific to batteries manufactured at the time of its publication. The contents do not constitute a warranty. ©Moixa Energy Ltd. - All Rights Reserved
Page 1 of 1
