Transcript
SDI DA
VSE-3901
DESCRIPTION
FEATURES
USER CONTROL VARIABLES / CARD EDGE INDICATORS Setup Status
Lock Rate Alarms Signal
143, 177, 270, 360, 540 Mb/s, Pass High, Low Locked, Not Locked, Pass, No data
Input signal types: SMPTE 259M, 344M, DVB-ASI Differential input, transformer coupled inputs and outputs 8 re-clocked and auto-equalized outputs Automatic or manual set of the reclock rate at 143 / 277/ 270 / 360 /_540 Mb/s Automatic bypass if unable to lock at the above rates Forced bypass capability available ASI compliant Command Control System (CCS) Enabled Provides real-time information on the following – Signal presence, reclock rate, bypass, regulator output
DejaView intelligent settings recovery system OUT1
SPECIFICATIONS Power Consumption Temperature
SERIAL VIDEO INPUT Standards Number of inputs Input connector Input impedance Input coupling Maximum input level Return loss Equalization Delay
<4W 0° C to 50° C (32° F to 122° F) SMPTE 259M, SMPTE 344M, DVB-ASI 1 BNC per IEC 169-8 75 W AC 800mV >18 dB from 5 MHz to 360 Mhz >15 dB to 540 MHz Automatic cable equalization < 15 nS For more information visit www.leitch.com
Serial Distribution Amplifier, Equalizing / Auto Reclocking - 143, 177, 270, 540 Mb/s
See the CCS (Command Control System™) section of this catalog for detailed explanations of applications and remote control panels applicable to the NEO product line. Leitch's CCS offers applications such as Pilot™ that provide the tools you need to configure, control, monitor, diagnose, and provide secure access to the equipment on your network regardless of your network topology.
NEO
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
INPUT
Specifications and designs are subject to change without notice.
ORDERING INFORMATION VSE-3901
OUT2
VSE-3901
The VSE-3901 offers a digital distribution amplifier supporting a variety of compressed and uncompressed serial digital signals. Standards supported are SMPTE 259M, SMPTE 344M, DVB-ASI at clock rates of 143, 177, 270, 360 and 540 Mb/s. SMPTE 310M 19.39 Mb/s can pass through this distribution amplifier in bypass mode. It provides 8 re-clocked and equalized outputs. This module, as is the case with all modules in the NEO family, can be controlled locally via a front-edge display or by remote communications allowing for remote control, monitoring and diagnostics using hardware control panels and/or a GUI.
SERIAL VIDEO OUTPUT Standards Number of outputs Output connector Output impedance Output return loss Signal level DC offset Rise and fall times Overshoot Jitter
SMPTE 259M, SMPTE 344M, DVB-ASI serial ouput over coax cable 8 BNC per IEC 169-8 75 W >18 dB over a frequency range of 5 MHz to 560 MHz 800 mV (±10%) 0 V (+ 0.5 V) 600 - 700 ps < 10% < 300 ps peak-to-peak
