Transcript
1.8 Meter Offset Receive Only Antennas P180FAE •
Precision Compression Molded Offset Reflector
•
Fully Galvanized Steel Az/El mount
•
Upgradable to Transmit Receive
Antenna Size - 1.8 Electrical Specifications Operating Frequency (GHz) Midband Gain, dBi (± .2dB) 3dB Beamwidth Antenna Noise Temperature (20° Elevation) Antenna Noise Temperature (30° Elevation)
Feed Interface First Sidelobe (typical) Cross-Pol Isolation (Linear) VSWR Mechanical Specifications Reflector Material Antenna Optics Mast Pipe Size F/D Ratio / Feed Support Elevation Adjustment Range Azimuth Adjustment Range Environmental Specifications Wind Load Survival Operational Temperature Operational Survival
Specifications Subject To Change Without Notice
969 Horsham Road
l
C-BAND 3.625 – 4.2 35.5 dBi 2.9° 49K 47K CPR229F
KU-BAND 10.95 – 12.75 45.5 dBi 0.9° 38K 35K WR75 -20 dB >30 dB (on axis) 1.3:1 Max.
Glass Fiber Reinforced Polyester SMC Prime Focus, One-Piece Offset Feed 3.5” SCH 40 Pipe (4.00” OD) .37 / Tripod Feed Support 5° to 90° Continuous Fine Adjustment 360° Continuous
125 mph (201 km/h) 45 mph (72 km/h) -40° to 140°F (-40° to 60° C) -50° to 160°F (-46° to 71° C)
©Toner Cable Equipment, Inc.
Rev 05-12
Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543
l
[email protected]
