Transcript
THERMOELECTIRC WINE COOLER Model No: VWC-1850D
Operation Manual
Index .
General Safety Precautions…………......…...........………………..2
.
Technical
Data………………………....….............………………………….3 .
Illustrated
Structure……………………..........…...………………………3 .
Electric
Principle
Diagram…………………………..……………………4 . Operation ………………………………………………………………………… …..4 .
Particular
Precautions……………………………………………………….5 . Maintenance……………………………………………………………………… …5 . Troubleshooting…………………………………………………………………… 5
.GENERAL SAFETY PRECAUTIONS ● After removing the wine cooler from the package, make sure it is in good condition. In case of doubt, do not use it and contact an authorized service center. ● Plastic bags, nails, etc. should be kept out of the reach of children. Read the operation manual carefully and check that the rating data on the rating nameplate corresponds to your power supply. ● This wine cooler should only be used as specified. The manufacturer will not be held responsible for any damage due to improper use or repairs made by unqualified personnel. ● Before cleaning the wine cooler, make sure it is unplugged. Never clean the unit with an acid preparation, medical solution, dilution, gasoline, oil or any other kind of chemical substance that could damage the refrigerator. ● Repair should only be made by authorized service centers.
● Caution 1. To reduce the risk of fire, replace only with same type fuse. 2. Free standing installation only 3. Do not use extension cords. 4. Danger: Risk of child entrapment. Before throwing away your old wine cooler, you must note: a. Take off the door; b. Leave the shelves in place, so that children may not easily to climb inside.
.TECHNICAL DATA
Type Volume (liter) Case Material Door Unit Dimension (W×H×D)(mm) Packaging Dimension (W×H×D)(mm) Net Weight (Kg) Gross Weight (Kg) Power Consumption (KW·h/24h) Fitting ambient temperature range of working Temperature Range Rated Voltage Rated Frequency Input power III. ILLUSTRATED STRUCTURE
VWC-1850D 52L Iron Glass 345X660X490 385x685x525 16 17.8 1.5 ＜32 7 —18 AC110V/220V 60HZ/50HZ 130W
1 Light switch 2 Ream Cover 4 Glass Door 5 Handle 7 TEMP Control Board 8 Light 10 Fan Mask 11 Foot 12 temp — for upper room upper room 14 LCD display 15 temp — for lower room room
3 Light 6 Fan Mask 9 Shelf 13 temp + for
16 temp + for lower
IV. ELECTRIC PRINCIPLE DIAGRAM
V. OPERATION OF WINE COOLER This is a dual zone wine cooler; the upper zone is for storage of white wine with temperature from 7 to 12 , the lower zone is for storage of red wine with temperature range from 12 to 18 . Control panel is in the middle of the door with LCD temperature display window in the middle. There are four buttons on the panel: push “Temp △” and “Temp▽“ on the left to increase and decrease the temperature in upper zone; and push “Temp △” and “Temp “ on the right to increase and decrease the temperature in lower zone. You can turn the interior light ON or OFF by pressing the light switch inside upper compartment. When the power switch is connected, cooling system starts to work. The temperature is set on certain position, which means that if the inner temperature reaches the set point, Self-control Temperature System would stop cooling system so that the
temperature in the cabinet rises gradually. When the inside temperature rises above the set point, cooling Self-control Temperature starts to work again, the cellar enters into cooling cycles. The TEMP-ADJ button is set on one certain point when the cellar is off the assembling line. When you want to change the temperature in the cabinet, please select the right zone and change accordingly. VI. PARTICULAR PRECAUTIONS ● In order to function at its highest potential, this wine cooler needs to be placed on flat floor, with 2cm spaces at each side and 10cm space at the backside. ● Use the adjustable iron case to place the cellar fully horizontal. ● Avoid direct sunshine and high temperature. ● Do not place heavy articles on the top of the cellar. VII.MAINTENANCE ● Shut off power supply before cleaning cabinet. ● Take out wine and shelves, and then clean the cabinet with soda water first and with clean water last. ● Do not use soap or detergent for the cabinet. ● Clean the cellar regularly. VIII. TROUBLESHOOTING Symptoms No cooling
Temperature inside not cold enough
Possible cause Plug not put in Low voltage Fuse broken The refrigerator is placed too close to a heat source; Bad ventilation; Fans don’t work; The door is not closed tightly or opened too frequently or for too long time;
Solutions
Put in the plug Ensure normal voltage Change fuse
Keep the refrigerator away from sunshine or other heat source; Place the refrigerator in the area with good ventilation and keep things away from the fans; Check whether the plug is connected or change the fan; Close the door tightly and don’t open the door too frequently or for too long time.
Peculiar smell Check whether there is inside Wrap the source or take it out anything sour inside refrigerator Inside light Set temperature Adjust the adjustor flashes higher than inner
temperature; The automatic defrost function start to work
Normal function. No repair needed
Too much humidity or Output the plug, stop the power, and defrost by hand, Frost on the too low temperature connect power again when the ice thaws cold sink inside the case
