Transcript
"FIORE" BATH SPOUT ( PT¾" ) TX441SFV1 INSTALLATION
SPECIFICATIONS
"FIORE" BATH SPOUT ( PT¾" ) TX441SFV1 INSTALLATION
SPECIFICATIONS
Water Supply (PT ¾")
Water Supply (PT ¾")
16 50
PT ¾
PT ¾
22
.5°
22 158.5
.5°
TROUBLESHOOTING CHECK POINT
PROBLEM
OPERATING CONDITIONS
1
Flow rate unsatisfactory
1. Water supply pressure : 0.05 ~ 0.75 MPa. 2. Ensure that water supply is clean ( No Sand, Dirt, Etc.)
158.5
TROUBLESHOOTING
SOLUTION Remove and clean
MAINTENANCE
1
Flow rate unsatisfactory
1. Water supply pressure : 0.05 ~ 0.75 MPa. 2. Ensure that water supply is clean ( No Sand, Dirt, Etc.)
SOLUTION Remove and clean
Always wipe chrome plated area with dry soft cloth, and sometimes wipe it with cloth soaked in mild soap.
ATTENTION
ATTENTION
Use of abrasive cleaning material such as; detergents containing hydrochloric acids, thinner, polishing powder, and nylon brush is not recommended
Use of abrasive cleaning material such as; detergents containing hydrochloric acids, thinner, polishing powder, and nylon brush is not recommended
1. STREAMER
S06439R
1. STREAMER
S06439R
"FIORE" BATH SPOUT ( PT¾" ) TX441SFV1 INSTALLATION
SPECIFICATIONS
"FIORE" BATH SPOUT ( PT¾" ) TX441SFV1 INSTALLATION
SPECIFICATIONS
Water Supply (PT ¾")
Water Supply (PT ¾")
16
16
50
Spout
50
Spout
PT ¾
PT ¾
22
22 158.5
1. Water supply pressure : 0.05 ~ 0.75 MPa. 2. Ensure that water supply is clean ( No Sand, Dirt, Etc.)
.5°
TROUBLESHOOTING CHECK POINT
PROBLEM
OPERATING CONDITIONS
Flow rate unsatisfactory
1
Remove and clean
MAINTENANCE
TROUBLESHOOTING CHECK POINT
PROBLEM
OPERATING CONDITIONS 1. Water supply pressure : 0.05 ~ 0.75 MPa. 2. Ensure that water supply is clean ( No Sand, Dirt, Etc.)
Flow rate unsatisfactory
1
SOLUTION Remove and clean
MAINTENANCE Always wipe chrome plated area with dry soft cloth, and sometimes wipe it with cloth soaked in mild soap.
ATTENTION Use of abrasive cleaning material such as; detergents containing hydrochloric acids, thinner, polishing powder, and nylon brush is not recommended
158.5
SOLUTION
Always wipe chrome plated area with dry soft cloth, and sometimes wipe it with cloth soaked in mild soap.
S06439R
CHECK POINT
PROBLEM
OPERATING CONDITIONS
MAINTENANCE
Always wipe chrome plated area with dry soft cloth, and sometimes wipe it with cloth soaked in mild soap.
.5°
16
Spout
50
Spout
ATTENTION 1. STREAMER
Use of abrasive cleaning material such as; detergents containing hydrochloric acids, thinner, polishing powder, and nylon brush is not recommended
S06439R
1. STREAMER
