Transcript
ENGLISH INDEX
Tablet Software
、Introduction to Graphics Tablets................................................................3
1
User’s Manual
1.1
Possible Applications ...........................................................................3
1.2
System Requirements ..........................................................................3
1.3
Introduction to Tablet Software.............................................................4
1.4
Supporting Operation Systems ............................................................5
1.5
Install Tablet Software ..........................................................................6
1.6
Uninstall Tablet Software......................................................................8
、Tablet Software Operation Guide ...............................................................9
2
2.1 Word Annotation Program......................................................................9 2.1.1
“Access” Word Annotation Program ........................................................ 9
2.1.2 Introduction to Annotation for Word ......................................................... 10 2.1.3 Introduction to Pen and Fluorescent Marker Tool Bars ............................. 11 2.1.4 Highlight.................................................................................................... 14 2.2
PenNotice ...........................................................................................16 2.2.1 “Access” PenNotice Program.................................................................... 16 2.2.2 Introduction to PenNotice Toolbars ........................................................... 16
2.3
PenCommander .................................................................................25 2.3.1 “Access” PenCommander.......................................................................... 26 2.3.2 “Pause” PenCommander............................................................................ 26 2.3.3 Application of PenCommander ................................................................. 26 2.3.4 Tool Setup for PenCommander.................................................................. 28 2.3.5 Symbol Definition for PenCommander ..................................................... 29 2.3.6 How to use instructions of PenCommander .............................................. 30 2.3.7 Reset Functions of PenCommander........................................................... 34 2.3.8 Limitations of PenCommander.................................................................. 38 2.3.9 Startup PenCommander with Windows System ........................................ 39 2.3.10 Uninstall PenCommander ........................................................................ 39
2.4
PenMail...............................................................................................40 1
ENGLISH 2.4.1 “Access” PenMail ......................................................................................40
1
、 I nt r odu ct i on t o G r aph ic s Ta bl et s
ENGLISH
2.4.2 Introduction to PenMail Toolbars...............................................................41 2.4.3 Setup writing format ..................................................................................47 2.4.4 Start to write...............................................................................................47 2.4.5 Main Delivery ............................................................................................48 2.5
Tablet Software can write and draw, and you can run different programs, such as, Microsoft Office, Desktop or Internet Explorer. These programs support the functions of handwriting, drawing, note taking, signature and Email.
PenSigner .......................................................................................... 49 2.5.1 “Access ”PenSigner ...................................................................................49 2.5.2 Introduction to PenSigner ToolBars ...........................................................50 2.5.3 Introduction to Pen and Brush Pen Toolbars..............................................51
、Frequently Asked Questions and Troubleshooting................................54
3
1.1 Possible Applications Software support (Digital pressure output for WINTAB, TABLET PC) for the tablet can be deployed in a wide area: for instance, taking minutes, business presentations, lectures, etc. Hardware Support (MSN and SKYPE video meeting)
How to Take Care of Your Tablet ................................................................. 55 1.2
System Requirements
Operating System
Windows 2000/XP/Vista
CPU
Pentium 4 or Faster
Hard Disk
256 MB or Higher
RAM (Memory)
256 MB (Win2000, XP), Vista (1GB)
Equipments
USB connector, CD/DVD ROM
System requirements may change without notice
2
3
ENGLISH 1.3
ENGLISH
Introduction to Tablet Software PenMail It can be used to send your mails with your own signature to your families or friends over the Internet.
Word Annotation Annotate for Word Allows you to handwrite and annotate in Microsoft Word documents and save the files.
PenSigner Insert signatures drawn graphics document.
PenNotice You can touch up the pictures on the screen, and then put the annotations or insert text and pictures when doing a presentation, sending email or saving those pictures.
1.4 PenCommander Allows you to write down the command symbols directly on the digital pen tablet so you execute commands or open files instantly.
or hand into a
Supports these Programs Operating Windows Windows System 2000 XP
Windows Windows XP 64 Vista
PenNotice PenMail
Y Y
Y Y
Y Y
Y Y
Annotate for Word
Y
Y
Y
N
PenCommander
Y
Y
Y
N
PenSigner
Y
Y
Y
Y
Word Annotatction: In Vista, you can use the Annotation function from the MS OFFICE 2003 or 2007. PenCommander: In Vista, you can use the handwriting and input function in the Vista system. 4
5
ENGLISH
1.5
ENGLISH Step 5
Install Tablet Software Select “Tablet Software”, and press the “Enter” key to start the Tablet Software installation.
Step 6
A message box will display so you can select the software programs you want to install and confirm the install location. After you select the programs, they will start to install.
Step 7
After the installation is completed, press OK to complete the software installation.
Install Tablet Software To use the Tablet software, you need to install the driver first and then install PenSuite. (For more instructions about the driver installation, refer to attached Driver Installation Manual).
Step 1 Step 2
Step 3
Step 4
Open your computer and start Windows. Install Driver Place the CD disc into the driver and the installation process will be automatically activated (See figure on the right). Select “Driver Setup” and press Enter to start the driver installation.
After the installation location is confirmed, press Confirm to install.
After the driver installation is completed, press “confirm” to re-start your computer.
6
If the installation is in Vista, when you finish step 7, wait until a message box displays to confirm the programs were installed correctly. When finished, you can remove the CD driver.
7
ENGLISH 1.6
Uninstall Tablet Software
To uninstall the Tablet Software, go to Software ►Uninstall
」
2
「Start」►「All programs」►「Tablet
ENGLISH
、 Tabl et Sof t w a re O pe rat ion G u id e
2.1 Word Annotation Program
Annotate for Word allows you to leave your handwritten annotations or hand drawn graphics at any place in a Microsoft Word file, and your annotations or hand drawn graphics will become part of the file. Supports Microsoft Office Word 2000 or higher version 2.1.1 “Access” Word Annotation Program
「
」 「
」 「
」
Click on Start ► All Programs ► Tablet Software ► for Word
Annotate
Activate the Microsoft Office Word application, and Annotate for Word will be automatically added into the Word tool bar (thus becoming an external program of Word).
8
9
ENGLISH Highlight
When using Word 2002 or 2003, you will be unable to use the external macro application when activating Annotate for Word because in Word 2002, the Macro Security is preset to High (Annotate for Word is an external Macro application). So you need to adjust the Macro Security from high to middle in Word as follows:
ENGLISH Can be used to mark up key text or character strings, and is for online viewing.
Setup Method: 1. Open Word→Tool→Macro→Security. (Set Security to Middle, and then reopen Word). 2. When security is changed to Middle, there will be a dialog box asking whether to use the Macro when opening Word. Press the Enable Macro button and you can use Annotate for Word immediately. About
2.1.3
2.1.2
Introduction to Annotation for Word
Pen
Fluorescent Marker
System information, version information and copyright statement for Annotate for Word.
Introduction to Pen and Fluorescent Marker Tool Bars
When you open a Word document, you can choose to press either the Pen or Fluorescent Marker buttons to start handwriting annotations. 1. Select Pen: The handwritings drawn will be same as those drawn by a pen or a ball point pen, where the thickness of each stroke will remain unchanged from start to end. You can also select the color or thickness of the pen before you start to write. 2. Select Fluorescent Marker: The handwritings drawn are displayed in a transluscent color and similar to those drawn by a fluorescent marker. Fluorescent marker can be used to stress key areas of a document or a highlight.
No pen pressure available. Used to annotate, sign and draw in a Word document. You can make annotations or draw graphics on any part of the screen and can select the color or thickness of the pen to highlight the handwriting recognition. No pen pressure available. This feature is used to highlight key points of an article, which are displayed in a translucent color.
10
11
ENGLISH Adjust the thickness of Move the lever from right to left in the penpoint “Adjust Thickness” slide board to adjust the thickness of the penpoint. The next time you write, a new thickness will be adopted for the handwriting. (Supports Microsoft Word 2000, Word 2002 and Word 2003) Current thickness of Thickness of penpoint currently penpoint displayed as a pixel, namely the minimum unit for an image point on the screen. Select the color of You can select the color of the penpoint penpoint according to any color chip available in the color field. The handwriting drawn will be changed to the selected color, until the color is replaced. In non-drawing mode, a color choice will be ignored. Current color of The left color chip below the color field penpoint will display the current color of the penpoint. Restore Cancel the last stroke. Press once to delete one stroke, until all handwriting is deleted. Delete Delete all handwriting.
Complete
ENGLISH When you complete annotations, press Complete to send out your handwriting, which can be used as a graphics object pasted in a Word document for editing. Send time can vary with different computer speeds and ram size. Now, the drawing mode is already terminated. If you still want to make annotations or draw graphics, press Pen or Fluorescent Marker buttons again to re-annotate after the transmission of graphics is completed.
If the file edition is not considered as a word document, a ste of a gaphics object will not be accepted and the graphics will not be inserted into the file. At this time the graphics will be temporarily saved on the clipboard, and you can use Paste to insert them into other files. Close Close annotation or drawing mode immediately and delete all handwriting that is not sent out. If Annotate for Word cannot be automatically added into the Word tool bar, you can try these options: When Word is open, check if the Annotate in the Tool Bar under View is activated. If not activated, click on Annotate to activate it. If there is no option for Annotate in the Tool Bar under View, use the Pen System CD to reinstall Annotate for Word (only reinstall Annotate for Word). If you still cannot add Annotate for Word into the Word tool bar, click on the “Options” under the “Tool” in the drop-down menu, and check the location in the File Location (see figure below). Then, copy PenSuite\Annotate\cht\annotate.dot in the CD into that location. If that position is empty, designate the location to C:\Program Files\Microsoft Office\Office\Startup
，
。
12
13
ENGLISH
ENGLISH
Remove All or A Part of Highlights in the File
2.1.4
Highlight
1.
Select the highlighted text to be removed, or press CTRL+A to select all text in the file.
2.
Press the arrow
to the right of
Apply Highlight Press on
, and select the “ text or graphics” to be highlighted.
Close Highlight Press the
button again, or press the [ESC] button.
Change Highlight Color Press the arrow
to the right o f
, and select the color to be used.
14
15
, and select None.
ENGLISH
ENGLISH 2.2.2.2 Mouse Model
2.2 PenNotice
「
」
Under the PenNotice software, you can add pictures on the screen, and then put annotations or insert text and pictures for a presentation, sending an email or saving those pictures. Mouse
Set key functions as mouse buttons.
Page Up
Same as keyboard Page Up function.
Page Down
Same as Keyboard Page Down function
2.2.1 “Access” PenNotice Program In order to access PenNotice, go to
「TabletSoftware」►
「 StartUp 」 ► 「 All
programs
」►
PenNotice
Examples
2.2.2
Introduction to PenNotice Toolbars
2.2.2.1 Model Functions 2.2.2.3 White board Model
Mouse Model
Set the function keys as mouse buttons.
White Board Model
Functions are the same as a traditional white board for writing or drawing in Windows.
Annotation Model
Add pictures and annotate text on the desktop of screen.
16
White Board
Electronic White Board
Pen Model
Change the pattern of the pen. Left to right. (Brush, Pen, Fluorescent Marker).
17
Brush Pen
ENGLISH With pen pressure function similar to a Chinese brush pen, there can be variations in the handwriting thickness if the pressure is too low on one stroke.
Pen
No pen pressure available. Its touch is just like a pencil.
Fluorescent Marker
It can be used to focus or remind of key points in an article, which are displayed in a translucent color.
After selecting Brush or Fluorescent Marker, you can annotate or draw anything on the screen. Before writing, you can set the pen point color or adjust the thickness or shape of the pen point to create different drawing methods. Pen point and Shape - Adjust the thickness and shape of the pen point. Styles of handwriting can be displayed in a round shape, square shape and various marker pen shapes, and in six sizes, which can be combined to produce different creative drawing methods.
ENGLISH
Eraser
Select the part you wish to delete and delete text letter by letter.
Undo
Return to the previous action.
Redo
Return to the action before the last change.
Page Up
1. Same function as keyboard Page Up. 2. Back to last page.
Page Down
1. Same function as keyboard Page Down. 2. Open new page or move to next one.
Select color of pen point - Select different colors of different pens. Select and change colors.
Select more different colors
Other functions:
Choose color and press “OK”.
18
19
Insert Text
ENGLISH Able to insert any text in any application as shown below:
1. After selecting the Insert Text button , click and select the location where you wish to insert text and drag the “Input Box” to this location.
ENGLISH 1. fonts of the inserted text. 2.
Font: You can change the
Font Size: You can change the font size of the inserted text.
3.
Bold: Change the text to bold.
4.
Italic: Change the text to italic.
5.
Underline: You can underline the text.
6.
Font color: You can change the text color.
7. Background Transparency: You can change the text background into a transparent color. 8. text. 2. An Input Box will appear at the location where the text is inserted, and an “Insert Text” tool bar will appear on top of this box. 3. Start to insert text. (If you want to leave the Insert Text application, press “ESC” to exit). 4. After confirming the inserted text, click on (Close) button to stop inserting text. 5. Now, text in the input box will form a text box at the location where the text is inserted. 6. Press (Save) button and a dialog box will appear. Press the Save button, and the inserted text will be saved at the location of insertion and become either a JPG or a Bitmap image file.
Background color: You can change the background color of the
9. Input: Insert the text. Insert picture Insert a picture on the page. Insert Select and insert an image into the page as your Background background. Image Insert Select a background color. Background Color Select more Select more colors and insert the background color colors and press OK.
Various functions of Insert Text are based on the principle of consistency for the whole Input Box, while no separate adjustment is made for a single Line or a single Word. The size of Input Box will be flexibly adjusted in line with the text inserted. Below are the explanations for various functions:
Select Area: Select any part of picture to save or Email. 20
Select any part of the picture and you can press
「save file」or 21
「Email」 functions.
ENGLISH About
ENGLISH Displays the PenNotice system, version information and copyright statement.
Example Open the PenNotice software in Windows, you can start the functions of whiteboard for writing or drawing, etc.
If you feel dissatisfied with the selected field and want to select another field, you do not need to click on the function button or close the application, but can directly drag the newly selected field. Delete All Save Files
Delete the added text and image drawn. If you would like to save all handwriting into a file, select “all pages” or “current page” and press the OK button. 2.2.2.4 Annotate Model
All the files will be saved as JPG or BMP file.
Annotation Clear
Clear all pages. After drawing on the desktop, select and other functions, then the clear button will appear.
Select and annotate the screen window for any signs or words, then save the picture as a file.
Activate Annotate from PenNotice and the cursor will change into the icon on the right side . Also, there will a yellow square frame line covering the whole screen to remind you that you are using Annotation; This frame line will disappear after you close the application and will not be left in your file. As long as the Annotate tool bar appears on the screen, you can start to annotate right away. Pen Model Refer to section 2.2.2.3 Adjust the Refer to section 2.2.2.3. thickness and shape of pen point
Print
Print the current document. 22
23
ENGLISH Select the Refer to section 2.2.2.3. color of Pen You can select the colors of the brush pen and pen ink. point
ENGLISH
Eraser
Refer to section 2.2.2.3.
Undo
Refer to section 2.2.2.3.
Redo
Refer to section 2.2.2.3.
Print
Refer to section 2.2.2.3
Page Up
Refer to section 2.2.2.3
About
Refer to section 2.2.2.3
Page Up
Refer to section 2.2.2.3
Close
「Esc」 Refer to section 2.2.2.3
Other functions available:
Insert Text
Examples
Refer to section 2.2.2.3
Insert Picture Refer to section 2.2.2.3 Select Area: Mail Transfer
Refer to section 2.2.2.3 Select any part of the picture to save or send out. Send an email to Outlook that includes a picture shown on the computer screen.
Save Files
This function is not available in Windows Vista email. Refer to section 2.2.2.3
Clean
Clear all the data pages.
Open MS Office in Windows, and you can use PenNotice for writing, annotating or drawing.
2.3 PenCommander
PenCommander allows you to rely on handwritten symbols on the pen tablet to open any program or document, Internet, and virtual buttons or play wav files, insert text, and use menu functions or system commands.
After drawing on the desktop, select and other functions, then the clear button will appear.
24
25
ENGLISH 2.3.1 Press
ENGLISH
“Access” PenCommander
「Start」►「All programs」►「Tablet Software」►
PenCommander
After acesssing PenCommander, the small icon for PenCommander will be shown on the tool bar in the lower right corner of the screen. When you write or draw anything on the digital tablet, the cursor will change into this icon 2.3.2
“Pause” PenCommander
Select the small icon
. Now, this icon will change into
PenCommander is paused. Click back into 2.3.3
.
，which means
again, and the small icon will change
, and you can start to use PenCommander.
Application of PenCommander
Open the Microsoft Word by PenCommander. From the upper-left corner, write a W, and the handwritten symbol will be recognized. The small icon in the lower right corner will change into blue and open Microsoft Word.
26
,
27
ENGLISH 2.3.4
ENGLISH (4) Activate PenCommander When Windows Is Opened: When this option is selected, the PenCommander will be activated when Windows system is opened. (5) About Button: Press About Button for system information, version information and copyright statement for PenCommander will be displayed. (6) Default Value: When Default Value Button is pressed, PenCommander will be reset to the initial setup value as when the driver was installed.
Tool Setup for PenCommander Setup
You can set up the ink button, ink width and ink color for PenCommander calligraphy. Move the cursor to the PenCommander icon and press the Up button on the digital pen (equivalent to right mouse button Key), and select the Reset Function. Then, move the cursor to the Setup Button, and this button will change into . Press the Setup Button for this screen to appear: Close
Uninstall
2.3.5
Move the cursor to Close and this button will change to . Press the Close button and you can close the defining screens for all symbols. Move the cursor to Uninstall PenCommander, and this button will change to . Press the Uninstall PenCommander button to uninstall PenCommander.
Symbol Definition for PenCommander
For first time use, refer to the definitions for all symbols below: (1) Ink Button: You can only write symbols by pressing down on the ink button. You can use penpoint (left mouse button), or as second pen button (right mouse button). (2) Ink Width: You can set up the ink width in pixels. The larger the number, the thicker the pen width will be. (3) Ink Color: You can set up the color of the PenCommander calligraphy
28
1.
Reset Function: Write a capital Z from top to bottom, and then draw a line back to the starting point.
2.
Reset Function: Move the cursor to the PenCommander icon in the lower right corner of the screen. Press the Up button on the digital pen (same as right mouse button), and click and select the Reset function. The definition screen for all symbols will appear as shown below:
29
ENGLISH
ENGLISH
Paste: Draw a line like number 1 from top to bottom.
Cut: Draw a curve like a capital C from top left to right. (2)
Minimize and Maximize the Window
Minimize: Draw a line from top right to lower left.
Maximize: Draw a line from lower left to top right. When restoring the maximized window to its original size, re-draw the symbol for Maximize. 2.3.6
How to use PenCommander
When you write or draw anything on a digital tablet, the cursor will change into this icon
Desktop: Minimize all windows, and draw an “L” from top to bottom. If you wish to restore all windows after minimizing them, re-draw the symbol for desktop.
. When written symbols are recognized, the small icon will change
into blue , and make a tick sound to execute the designated commands. When written symbols are not recognized, the small icon will change into red
，and make a beep so there will not be anything to write or draw.
(3)
Browse
The computer will only make a tick sound or a beep when its volume is opened. (1)
To go to previous page, draw a line from right to left (for Internet
Cut and Paste Explorer).
Copy: Draw a line like number 1 from bottom to top. To go to next page, draw a line from right to left (for Internet Explorer). 30
31
ENGLISH
ENGLISH (5)
Access and stop programs
To go to first page, draw a line from top to buttom and draw from bottom to top following the original line.
，
To open Word draw a curve like a capital W from top left corner to lower right. To go to last page, draw a line from bottom to top and then draw from top to bottom following the original line. To open Excel To scroll pages, hold the first pen button (button near the penpoint), and move the penpoint on the digital tablet up and down in the air (pen type scrolling). (4)
，draw a curve like a capital E from top to bottom.
To email, draw a curve like a capital M from lower left to lower
Edition right.
To restore, to use Restore in text editors like Word, Excel and WordPad, draw a line from right to left and then right to left following the original line.
To redo, draw a line from right to left and then left to right following the original line.
For input, draw a line from top to bottom and then left 90
To open IE, draw a curve like a lower case e from the middle.
To exit the application program, draw a diagonal from top right to lower left, and then draw a direct line upwards and finally draw another diagonal from top left to lower right to end.
To pause PenCommander, draw a capital U from top to bottom.
degrees.
Search, draw a direct line from top to bottom and then right 90 degrees.
32
33
ENGLISH (6)
File Commands
Execute
ENGLISH Execute Button: You can open any application program or document. You can either type in the path and file name directly, or you can click on the browse button . Except for application programs or files, you can also designate the directory location at the start of execution and provide the parameter value for executing the applications.
To open an old file, draw a counterclockwise triangle from the the right to the top left.
，
For example: select the browse button and look for Pclassic.exe, the execution file for Painter Classic to start Painter Classic as shown in the figure below: To open a new file, draw a capital N beginning from the lower left and upwards.
To save a file, draw a capital S from top right and downwards.
To print a file, draw a capital P from the lower left and upwards. 2.3.7
Reset Functions of PenCommander Internet
By pressing various pen command buttons, you can implement the PenCommander edition, where each PenCommander application can have seven functional options, but you can only execute one function each time. Detailed instructions are as the follows:
34
Internet Button: Select Internet services such as web sites and emails. For instance, when you try to select a web site under the Service Categories, you enter the web address www.yahoo.com to connect to the Yahoo site as shown below.
35
Shortcut Key
ENGLISH Shortcut Key: Virtually any button combinations can be available in any PenCommander application. For instance: press the execute the copy action.
ENGLISH You can either type in the path and file name directly, or click the browse button to find the wav files. For example: select the browse button
copy button and set up Ctrl+C to
Text Sound
, and find the Chimes.wav to play.
Text Button: Text can be entered into the edit area.
Sound Button: You can play any wav file.
36
37
ENGLISH Menu allows you to enter the underline characters into the blank spaces below so that you can use the menu functions. For instance: enter FS to execute the File/Save File function.
Menu
ENGLISH 2.3.9
Startup PenCommander with Windows System
STEP-1
STEP-2
System
Move the cursor to the PenCommander icon in the lower right corner of the screen. Press the Up button on the digital pen (same as right mouse button), select the Reset Function , and press Setup PenCommander. Activate PenCommander When Windows Is Started, and press the Confirm button. PenCommander will be activated when Windows is started.
System Key: allows you to set up one system function, as well as the parameter value for this system function. For example, if you choose Maximize the Window, you will maximize the window as shown in the figure below.
2.3.10 Uninstall PenCommander 2.3.8
Limitations of PenCommander PenCommander can be used in combination with digital tablets or mouse devices available on the market.
There are two methods: Step 1 Move the cursor to the PenCommander icon .. Press the Up button on the digital pen (same as right mouse button), and select Uninstall PenCommander terminate PenCommander.
38
39
to
ENGLISH Move the cursor to the Uninstall PenCommander button and this
Step 2
ENGLISH
button will change into . Press the Uninstall PenCommander button and this application can be uninstalled. 2.4 PenMail
PenMail allows you to sign your name and send to your family and friends over the Internet, where the recipients can receive the mails with your genuine name. Plus, you can select a background and insert computer text and images to enrich the contents of your letters. 2.4.1
“Access” PenMail
Click on Start►All Programs►PenSuite►PenMail 2.4.2
Introduction to PenMail Toolbar
These functions are explained as the follows: Open New File Open an new page
Now, the PenMail tool bar will appear on the screen and the cursor will become
Open Old File
Open an existing file. Open *.upm file format for PenMail.
. Save the File
Allows you to save the current page directly. Now, the file format can be directly saved as
jpg or upm.
40
Mail Delivery
Send the current file via the email software with the file format transferred as a JPEG file.
Print
Print the current document.
41
Brush Pen
Pen
ENGLISH Pen pressure is available, like a Chinese brush pen as there can be variations in the thickness of the brush width if the pressure is too low on one stroke.
No pen pressure available. Its touch is just like a pencil.
While selecting brush pen/pen for handwritten graphics, you can make annotations or draw graphics on any part of the screen and can select the color or thickness of the penpoint to adjust the features of the next stroke. White-Out
White-out can be used to correct incorrect words, images or paper background, and grid lines can be likewise deleted (grid lines are used for ensuring drawing accuracy, and the recipients will not see them when the mail is sent). If a background image is selected as the paper background, the white-out would be in white. If a background color is selected as the paper background, the white-out would vary in accordance to the color.
Insert Text
ENGLISH An Input Box will appear at the location where the text is inserted, and an “Insert Text” tool bar will appear on top of this box. Start to insert text. (If you want to leave the Insert Text application, press “ESC” to leave). After confirming the inserted text, click the (Close) button to stop inserting text. Now, text in the input box will form a text box at the location where the text is inserted. Press the (Save) button and now a dialog box appears. When confirming the path and file name, press the Save button. The inserted text will be saved at the location of insertion become either a JPEG or a Bitmap image file.
You can also set background color for the inserted text.
You can insert computer text into any application program. After selecting the Insert Text button, click and select the location where you wish to insert text and drag the “Input Box” to the appropriate input area
Various functions of Insert Text are based on the principle of consistency for the whole Input Box, while no separate adjustment is made for a single line or a single word. The size of Input Box will be flexibly adjusted in line with the text inserted. Below are the explanations for various functions:
42
43
ENGLISH
1.
Font:
You
can
change the fonts of the inserted text. 2.
Bold: You can change the text into bold.
4.
Italic: You can change the text into Italic.
5.
Underline: You can underline the text.
6.
Font color: You can change the text color.
：
：
Image You can select an image as background. can
Insert Images
7.
Background Transparency: background into a transparent color.
8.
Background color: You can change the background color of the text.
9.
You
1. Insert Background Color You can select a color for background. 2. Insert Background
Font Size: You can change the font size.
3.
ENGLISH Select the color of penpoint -- You can select the colors of the brush pen and pen ink. Press OK when you are finished.
change
If you choose to insert a Background Image, select a image similar to a letter paper in size as much as possible. If the size of the selected image is smaller than the letter paper, then the image will be enlarged automatically to fit the letter size paper.
Restore (Ctrl+Z)
If you select an image that is larger than the letter paper, then the image will be condensed to fit the paper size. Return to the previous action.
Cancel Restore (Ctrl + Y)
Undo restore.
the
Close: Exit this function.
Adjust the thickness and shape of penpoint Styles of handwriting can be displayed in round shape, square shape and various marker pen shapes, and in six sizes, which can be combined to produce different creative drawing methods.
44
45
Setup
ENGLISH You can set up the size of grid lines and whether the paper can be automatically scrolled. Grid lines are used for ensuring drawing accuracy, and recipients will not see them when he mail is sent.
ENGLISH
2.4.3
Setup writing format
Select paper size There are four paper sizes to choose: A4, A5, Legal and Letter. After the setup is complete, paper size used last time will be automatically loaded when opening the PenMail next time. STEP-1
After the PenMail is opened, press
(Open New File)
And you can setup the shape, width and color of handwritings as well as the paper background color. Refer to section 3-4-2. Display Scale
Display the scales of current handwriting with five scales available.
2.4.4
Start to write
When PenMail is opened, you can change the background and select the appropriate pen and pen color to write or insert images (see figure below). When you write more than one page, the number of pages will be automatically increased up to a maximum of five pages. About
Displays the system information ,version information and copyright statement for PenMail.
46
47
ENGLISH
ENGLISH 2.5 PenSigner
PenSigner can be used in combination with the text processing software, e-mail software and other application programs that let you post images. PenSigner will automatically transfer your handwriting into the file you are editing. 2.5.1
“Start PenSigner”
Click on Start►All Programs►TabletSoftware►PenSigner
2.4.5
Main Delivery
After you finish writing, press the Mail Transfer button, which will automatically open your email software and append the letter you just made in the form of an attachment to the email. Just enter the email address and the mail will be sent out. The PenSigner tool bar will appear on the screen.
48
49
ENGLISH 2.5.2
ENGLISH System 1.Setup: Four options available:
Introduction to PenSigner ToolBar
Pen Brush Pen
No pen pressure available. Its touch is just like a pencil.
Auto Send after Timeout: If you select this option, PenSigner will automatically transfer your handwriting to the file when the pen is not being used. You can set the timeout and select the amount in milliseconds. Click on “OK” or if you click “Cancel”, then you must go back to “PenSigner ToolBar” and press the
Pen pressure is available, like a Chinese brush pen as there can be variations in the thickness of the brush width if the pressure is too low on one stroke.
While selecting brush pen/pen for handwritten graphics, you can make annotations or draw graphics in any area of the screen and can select the color or thickness of the pen point prior to any stroke to adjust the features of next stroke. The tool bar for the pen and brush pen is shown below. Refer to section 2.5.3 for detailed explanations.
“Complete” button so that the handwriting can be sent out. Send then close this application: If you select this option, PenSigner will close after the handwriting is sent out. 2. About: Display the system information, version information and copyright statement for PenSigner. 3. Close: Use this option to close PenSigner. Close
2.5.3
Close the PenSigner software
Introduction to Pen and Brush Pen Toolbars
When any application software is activated, you can choose either Pen or Brush Pen button to start to execute the handwritten signature or graphics.
50
51
ENGLISH 1. Choose Pen: The handwriting drawn will be as same as are those drawn by a pen or a ball point pen, where the thickness of each stroke will remain unchanged from start to end. You can choose the thickness of the penpoint before you start to write. 2. Choose Brush Pen: Handwriting drawn will show the pen pressure and will be similar to fonts drawn by the Brush Pen.
Delete
ENGLISH Delete all handwriting and you can start over or redraw graphics.
Complete
When you complete a signature, press Complete button to send out your handwriting, which will be a graphics object pasted in the current application software.
Close
Close the drawing mode immediately and delete all handwriting that is not sent out.
Adjust the thickness of Move the slidebar from left to right in penpoint Adjust Thickness so that the thickness of penpoint can be adjusted. For the next stroke, the new thickness will be used for handwriting. Thickness of penpoint currently Current thickness of displayed in pixels, the minimum unit for penpoint an image point on the screen. Select the penpoint
color
You can select the color of the from any of color chip available in the color field. From now on, the handwriting drawn will be changed into the selected color, until the color is changed again. In non-painting mode, there will be no choice of color.
Current thickness of The color field will display the current penpoint color of the penpoint. Recover Cancel the last stroke. Press once to delete one stroke, until all handwriting are deleted. 52
53
3
、 F re qu ent l y A sk ed Q ue st i on s and Tro ub le sho ot in g
ENGLISH
After I installed the driver, why is the Tablet Software not working? If the cursor does not move and follow the digital pen in the tablet working area and no icon ( ) displays in the lower right corner of the system tray, that means the driver installation has failed and you need to check the following steps: 1. Remove the tablet's USB plug from the computer. 2. Uninstall the tablet driver from the system. 3. Re-connect the tablet's USB to the computer. 3.1 Check is the tablet's LED is blinking or not? If the LED is not lit, that means your tablet is faulty. 3.2 Test your wireless stylus pen in the tablet working area, and if it can work as a mouse, that means the hardware is OK. If it doesn't work, then you need to change the battery. 3.3 After you changed the pen battery, if it still not working, that means the hardware is faulty 4. You can download the latest driver version from our website. 5. Setup the new driver version, it will require you to restart your computer. 6. After you restart your computer, in the bottom right of the screen, you can find the tablet icon ( ). 6.1 If you can't find the tablet icon ( ) in the bottom right of the screen, it means the driver failed to install, and this could be an incompatible issue. 6.2 Check [My Computer] ► [Properties] ► [Hardware] ► [Device Manager], if there is an exclamation mark that is shown, this means the installed tablet driver is incompatible with Windows. If you have this problem, contact us for assistance. 7. By clicking the tablet icon ( ) in the bottom right of the screen, you can test the pressure sensitivity to see whether the pen pressure function works or not. If your tablet does not have pen pressure, it means the pen might be faulty.
ENGLISH Taking Care of Your Tablet To ensure your pen tablet can be used for a long time, follow these suggestions:
When the pen tablet is not in use, put the pen into the pen holder (or place the pen flatly) to avoid using the battery in the pen.
Store the tablet in a cool, dry place. Avoid placing it in a high temperature environment or putting a heavy object on it and this will cause damages to working area.
This is an electronic product so do not drop or shock this product.
Never soak the tablet in any fluid. .
Never store the tablet in extremely high or cold temperatures, or in a place with relatively high humidity.
Never open the tablet by yourself, this will cause your warranty to expire.
☆
54
55
