Similar Pages

Transcript

Form No. 2175 906693  Mower Conditioner SERVICE PARTS MANUAL Introduction When ordering service parts, specify the correct part number, full description, quantity required, the unit model number and serial number. The Mower Conditioner model and serial number is on a plate located on the left side of the Swing Frame at the Steering Post Pivot. ”Right” and ”left” are determined from a position standing behind the Mower Conditioner. From this position, the Drawbar and Positioner are on the ”left” side. GEHL Company reserves the right to make changes or improvements in the design or construction of any part of the unit without incurring the obligation to install such changes on any previously delivered units. NOTE: On original tire replacement, company policy prohibits the sale of replacement tires for all GEHL machinery. Replacement Wheel Sets are available and tire size information is called out with the Wheel Sets to facilitate replacement tire selection. ALL REPLACEMENT TIRES MUST BE PURCHASED LOCALLY. Refer to the abbreviations table located on this page for the various fastener descriptions. Standard attaching hardware torque values are also provided on the inside back cover. In the exploded view parts list, Reference Numbers may have additional information following the Reference Number. A number in parentheses such as (4), will indicate a quantity of how many times that Reference Number is used in that location. A Tear Drop symbol will indicate an application of a “wet” product such as oil, and the number inside the Tear Drop will correspond to the description in the Parts List. Also, a number inside of a hexagon will be the torque value required, in foot pounds, on the associated Reference Number. Items shown in the parts list that do not have Reference Numbers are shown for reference purposes only and are NOT available for purchase. Unless otherwise specified, all Cap Screws or Bolts are Grade 5, cadmium or zinc plated; Hexagon Nuts for Grade 5 Screws or Bolts are Grade B; Hexagon Nuts for other Screws or Bolts are Grade A. NOTE: The following abbreviations may used herein: ASSD ASSY CB CCW CP CS CTR CW DEG DIA FCS FHMS FL FLN FLS FW GA GR HD HN INCL JT LG LH LW LN LW M MM/mm NF PB PTO RH RPM RT SERR SHCS SN SQ T TFS THMS THRD WLDMT # () – Assembled – Assembly – Carriage Bolt – Counterclockwise – Cotter Pin – Cap Screw (Hexagon Head) – Center – Clockwise – Degree – Diameter – Flanged Cap Screw – Flat Head Machine Screw – Flanged – Flanged Lock Nut (Hexagon) – Flanged Lock Screw (Hexagon) – Flat Washer – Gauge – Grade – Hard or Head – Hex Nut – Includes – Joint – Large – Left Hand – Lock Washer – Lock Nut – Lock Washer – Metric – Millimeter – National Fine – Plow Bolt – Power Take Off – Right Hand – Revolutions Per Minute – Right – Serrated – Socket Head Cap Screw – Serial Number or Slotted Nut – Square – Tooth or Teeth – Thread Forming Screw – Truss Head Machine Screw – Thread – Weldment – Number – (Quantity Used Here) – Torque Required in foot pounds – Indicates a Fluid Application TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Front Cover Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Decal Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Tongue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5 Trailer Frame, Leg & Pusharm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–7 Pusharm & Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Wheel Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Forming Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–11 Header Frame & Conditioner Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–13 Conditioner (Left Side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–15 Conditioner (Right Side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16–17 Pitman & Wobble Arm Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18–19 Reel Variable Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20–21 Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22–23 Sickle & Guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24–25 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26–29 Tower–to–Gearbox PTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Tower–to–Tractor PTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Hitchjack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Gear Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Options & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30–32 Hydraulic Tongue Positioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Mechanical Tongue Positioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Transport Light Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Cutterbar Wearplate Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Tall Crop Divider Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Center Skid Shoe Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Safety Tow Chain (10 Ton) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34–36 Standard Hardware Torque specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover Attaching Hardware Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover Printed in U.S.A. 1 906693/AP993 DECAL LOCATIONS GENERAL INFORMATION PAINT NOTICE Use this list to order paint for refinishing: 906315 One Gal. AG Red 906324 One Qt. Light Grey 906316 6 (12 oz. Spray Cans) AG Red 906325 6 (12 oz. Spray Cans) Light Grey Decal Locations information is provided to assist in the proper selection and application of new decals, in the event the original decal(s) become(s) damaged or the machine is repainted. Refer to the listing for the illustration reference number, part number, description and quantity of each decal provided in the Kit. Refer to the appropriate illustration(s) for replacement location(s). NOTE: Refer to the SAFETY Chapter of the Operator’s Manual for the specific information provided on all of the various Safety Decals furnished in the Decal Kit(s). To insure proper selection for correct replacement decal(s), compare all of the various close-up location photographs to your machine BEFORE starting to refinish the unit. Then, circle each pictured decal (applicable to your machine) while checking-off its part number in the listing. After you have verified all the decals needed for replacement, set aside unneeded decals for disposal. The Decal Set Number for the MC2175 is 126970. The Set includes the following: NEW DECAL APPLICATION Surfaces MUST be free from dirt, dust, grease and other foreign material before applying the new decal. To apply a solid-formed decal, remove the smaller portion of the decal backing paper and apply this part of the exposed adhesive backing to the clean surface while maintaining proper position and alignment. Slowly peel off the other portion of the backing paper while applying hand pressure to smooth-out the decal surface. Ref. No. 1. 2. 3. 4. 5. 6. Part Number 060510 060511 067493 075749 082666 091444 7. 8. 093020 093365 9. 10. 093366 093367 11. 12. 13. 14. 093373 093381 093466 093643 15. 16. 17. 18. 19. 20. 093653 094913 094914 112389 112390 115974 Description & Quantity Jack Storage Position Jack Lift Position Red Reflector Stripe (2 Places) Drive Line Dimensions Do NOT Lift on Pushbar DANGER – Rotating Component (2 Places) Lubrication Symbol WARNING – Close or Replace Guard (2 Places) IMPORTANT - Store Manual Here WARNING - Owner’s Responsibility & Read Manual WARNING - General Safety WARNING - Use Drawbar Transport Lock WARNING – 540 RPM Operation ONLY DANGER – Stay Clear of Header (3 Places) WARNING – Rotating Drive Line GEHL 3-1/4” (3 Places) GEHL 5” 2175 (2 Places) Decal – Colorbar (2 Places) WARNING – Install Transport Locks (2 Places) NOTE: CAUTION Order Part Number 126757 for 10 ft roll of replacement Striping ALWAYS observe Safety Rules shown on Decals. If Decals become damaged, or if the unit is repainted, replace the Decals. If repainting, BE SURE that ALL Decals from the Kit(s) which apply to your machine, are affixed to your unit. 906693/AP993 2 Printed in U.S.A. l7 6 14 5 6 6 16 1 7 13 10 2 15 11 4 11 13 10 4 18 19 15 2 Front Master l7 3 8 6 5 20 16 14 14 16 12 1 19 14 18 16 9 14 19 20 20 3 8 18 Printed in U.S.A. 3 906693/AP993 MC2175 – TONGUE 3 1 9 2 10 11 12 13 14 12 4 5 9 8 6 7 15 906693/AP993 4 Printed in U.S.A. MC2175 – TONGUE Ref. No. 01 Part No. 330–33269 076589 Description Qty. Req. Ref. No. GUARD/TIRE . . . . . . . . . . . . . . . . . . . . . . . 1 08 087758 650710 FLS 3/8X1 . . . . . . . . . . . . . . . . . . . . . . . . . 2 070856 NUT/HEX FLANGE SERR LOCK 3/8 . . 2 09 076590 FLS 1/2X1 . . . . . . . . . . . . . . . . . . . . . . . . . 2 10 081374 NUT/HEX FLANGE SERR LOCK 1/2 . . 2 02 097775 DRAWBAR/ASSY . . . . . . . . . . . . . . . . . . . . 1 03 220–32514 PIN/WLDMT . . . . . . . . . . . . . . . . . . . . . . . . . 1 12 PLATE/HITCH TOP . . . . . . . . . . . . . . . . . . 1 CS 5/8X2–1/4 (L) . . . . . . . . . . . . . . . . . . . 4 HUB/JACK (WELD–ON) . . . . . . . . . . . . . . 2 126375 SHIELD/DRIVELINE (INCL 11) . . . . . . . . . 1 CB 3/8X1–3/4 (N,L,LN,2P) . . . . . . . . . . . 3 126342 FLAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 124484 FLANGETTE . . . . . . . . . . . . . . . . . . . . . . . . 2 650704 CS 1/2X3–1/2 (LN) . . . . . . . . . . . . . . . . . . 1 Qty. Req. Description 059743 061685 11 650650 Part No. CB 3/8X1 (N,L) . . . . . . . . . . . . . . . . . . . . . 3 CLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 13 520092 BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1 SCREW/SELF TAPPING . . . . . . . . . . . . . 7 14 520093 LOCK/COLLAR . . . . . . . . . . . . . . . . . . . . . . 1 125421 HOSE/ASSY (230″) . . . . . . . . . . . . . . . . . . 1 15 803098b CHAIN/SAFETY (OPTIONAL) . . . . . . . . . . 1 06 088841a JACK/ASSY . . . . . . . . . . . . . . . . . . . . . . . . . 1 07 087756 PLATE/HITCH ASSY LOWER . . . . . . . . . . 1 04 097859 072330 05 Printed in U.S.A. a) For breakdown, see Components page titled Hitchjack. b) For breakdown, see Options and Accessories pages. 5 906693/AP993 MC2175 – TRAILER FRAME, LEG & PUSHARM 906693/AP993 6 Printed in U.S.A. MC2175 – TRAILER FRAME, LEG & PUSHARM Ref. No. 01 Part No. 220–32516 650495 Description Qty. Req. Ref. No. PIN/PUSH ARM PIVOT . . . . . . . . . . . . . . . 1 24 CS 1/2X1–1/4 (N,L) . . . . . . . . . . . . . . . . . 1 Part No. Description Qty. Req. 200–32504 LINK/TRANSPORT . . . . . . . . . . . . . . . . . . . 2 651123 CS 5/8X1 (L) . . . . . . . . . . . . . . . . . . . . . . . 2 02 097772 FRAME/TRAILER ASSY . . . . . . . . . . . . . . 1 25 400–21904 WASHER/SPECIAL . . . . . . . . . . . . . . . . . AR 03 030–17662 CS 3/4X10 (N,2P) . . . . . . . . . . . . . . . . . . . . 2 26 480–27676 WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 2 04 360–32500 SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 27 200–32505 CONNECTOR . . . . . . . . . . . . . . . . . . . . . . . 2 05 045–31407 BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . 2 28 380–32342 SPRING/DOUBLE TORSION . . . . . . . . . . 2 06 360–32499 SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 29 040–33325 LIFT/FLEXIBLE ASSY . . . . . . . . . . . . . . . . 2 07 330–33279 DEFLECTOR/THIRD LINK . . . . . . . . . . . . 1 30 220–32515 PIN/WHEEL ASSY . . . . . . . . . . . . . . . . . . . 2 650533 08 200–32506 570021 650709 CS 3/8X1–1/2 (N,L,P) . . . . . . . . . . . . . . . . 2 LINK/THIRD . . . . . . . . . . . . . . . . . . . . . . . . . 1 YOKE/ASSY . . . . . . . . . . . . . . . . . . . . . . . . 1 10 380–32350 SPRING/FLOTATION ASSY . . . . . . . . . . . 2 11 200–32507 PIVOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 12 030–31904 U–BOLT 3/4 (2N) . . . . . . . . . . . . . . . . . . . . 1 13 081377 FLS 3/8X1–1/4 . . . . . . . . . . . . . . . . . . . . . . . 1 14 220–32517 PIN\SPRING PIVOT . . . . . . . . . . . . . . . . . . 1 240–32043 570014 19 20 21 22 23 070856 045–31406 117085b FITTING/GREASE . . . . . . . . . . . . . . . . . . 1 220–32520 PIN/LOWER . . . . . . . . . . . . . . . . . . . . . . . . 2 Printed in U.S.A. 082621 SPINDLE (WELD–IN) . . . . . . . . . . . . . . . . . 2 PLUG/SPRING . . . . . . . . . . . . . . . . . . . . . . 2 34 480–42349 PIN/PIVOT LH . . . . . . . . . . . . . . . . . . . . . . . 1 35 049038 LATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 36 111377 DOOR/ASSY . . . . . . . . . . . . . . . . . . . . . . . . 1 SCREW/HEX WASHER HD . . . . . . . . . . 2 37 125882 SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 38 125883 SCREW/SPECIAL . . . . . . . . . . . . . . . . . . . 1 39 124667 650545 CYLINDER/HYDRAULIC ASSY . . . . . . . . 1 LEG/ASSY LT . . . . . . . . . . . . . . . . . . . . . . . 1 CS 5/16X1–1/2 (LN) . . . . . . . . . . . . . . . . . 2 385–27865 NUT/HEX LG FL SERR LOCK 3/8 . . . . 1 082623 FITTING/GREASE . . . . . . . . . . . . . . . . . . 2 PIN/UPPER . . . . . . . . . . . . . . . . . . . . . . . . . 2 33 570014 BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CS 3/8X1–1/4 (LN,P) . . . . . . . . . . . . . . . . 2 32 061872 ARM/PUSH ASSY LT . . . . . . . . . . . . . . . . . 1 LEG/ASSY RT . . . . . . . . . . . . . . . . . . . . . . . 1 220–32519 650577 FITTING/GREASE . . . . . . . . . . . . . . . . . . 1 082620a 650577 31 CS 3/4X4 (N,L,P) . . . . . . . . . . . . . . . . . . . 2 250–32506 18 570002 FITTING/GREASE . . . . . . . . . . . . . . . . . . 2 09 570014 650491 40 047269 650969 FITTING/GREASE . . . . . . . . . . . . . . . . . . 1 MOUNT/SMV BRACKET . . . . . . . . . . . . . . 1 CS 5/16X1–1/4 (N,L,6P) . . . . . . . . . . . . . 2 SOCKET/SIGN MOUNTING . . . . . . . . . . . 1 CS 5/16X5/8 (LN) . . . . . . . . . . . . . . . . . . . 2 a) Not illustrated. b) For Seal Kit, order 093110. CS 5/16X1–1/2 (LN) . . . . . . . . . . . . . . . . . 4 7 906693/AP993 MC2175 – PUSHARM & HYDRAULICS Ref. No. 01 Part No. Description Qty. Req. 030–17662 CS 3/4X10 (N,2P) . . . . . . . . . . . . . . . . . . . . 1 02 117086a CYLINDER/HYDRAULIC ASSY . . . . . . . . 1 03 380–32351b 04 117927 570019 240–32029 570019 Ref. No. Qty. Req. 220–32518 SPRING/FLOTATION ASSY RT . . . . . . . . 1 09 400–32443 WASHER/SPECIAL . . . . . . . . . . . . . . . . . AR ARM/PUSH ASSY RT . . . . . . . . . . . . . . . . 1 10 097859 CLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 (AFTER SN25199) 11 124128 HOSE/ASSY (137″) . . . . . . . . . . . . . . . . . . 1 ARM/PUSH ASSY RT . . . . . . . . . . . . . . . . 1 12 420–33066 GROMMET . . . . . . . . . . . . . . . . . . . . . . . . . 2 FITTING/GREASE . . . . . . . . . . . . . . . . . . 1 13 117085a CYLINDER/HYDRAULIC ASSY . . . . . . . . 1 14 125421 HOSE/ASSY (230″) . . . . . . . . . . . . . . . . . . 1 655018 072330 FITTING/GREASE . . . . . . . . . . . . . . . . . . 1 06 480–27676 WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 2 07 310–32513 SCREW/SPECIAL (5/8 L) . . . . . . . . . . . . . 2 906693/AP993 Description 08 (BEFORE SN25200) 570014 Part No. PIN/PIVOT RT . . . . . . . . . . . . . . . . . . . . . . . 1 PIN/COTTER 3/16X1–1/4 . . . . . . . . . . . . 2 SCREW/SELF TAPPING . . . . . . . . . . . . . 3 a) For Seal Kit order 093110. b) For replacement parts order 385–27865 Top Plug, 380–32350 Spring & 385–27867 Bottom Plug. FITTING/GREASE . . . . . . . . . . . . . . . . . . 2 8 Printed in U.S.A. MC2175 – WHEEL ASSEMBLY 15 16 1 8 17 9 11 2 10 3 12 14 13 4 10 5 Ref. No. 01 Part No. Description Qty. Req. 7 6 Ref. No. 082623 LEG/ASSY LT (SHOWN) . . . . . . . . . . . . . . 1 09 082620 LEG/ASSY RT (NOT SHOWN) . . . . . . . . . 1 10 02 079716 SEAL/GREASE . . . . . . . . . . . . . . . . . . . . . . 2 03 042163 04 091870 05 Part No. Description Qty. Req. 076586 CAP/GREASE . . . . . . . . . . . . . . . . . . . . . . . 2 11 042162 CUP/WHEEL BEARING . . . . . . . . . . . . . . . 2 CONE/WHEEL BEARING . . . . . . . . . . . . . 2 12 046000 BOLT/WHEEL . . . . . . . . . . . . . . . . . . . . . . 12 HUB/WHEEL ASSEMBLY (INCL 11–14) . 2 13 046001 NUT/WHEEL . . . . . . . . . . . . . . . . . . . . . . . 12 520201 CONE/BEARING . . . . . . . . . . . . . . . . . . . . 2 14 520054 CUP/BEARING . . . . . . . . . . . . . . . . . . . . . . 2 06 066717 WASHER/SPINDLE . . . . . . . . . . . . . . . . . . 2 15 126739 WHEEL/RIM (14 X 8KB DC) . . . . . . . . . . . 2 07 653102 NUT/SLOTTED 7/8 NF . . . . . . . . . . . . . . . . 2 16 045582 VALVE/TIRE . . . . . . . . . . . . . . . . . . . . . . . . 2 08 655010 PIN/COTTER 1/8X1-1/2 . . . . . . . . . . . . . . . 2 17 082621 SPINDLE (WELD–IN) . . . . . . . . . . . . . . . . . 2 Printed in U.S.A. 9 GREASE/GUN 242 LITHIUM . . . . . . . . . AR 906693/AP993 MC2175 – FORMING CHAMBER 16 15 14 2 7 12 13 4 5 6 8 3 11 9 10 22 17 21 19 18 20 1 906693/AP993 10 Printed in U.S.A. MC2175 – FORMING CHAMBER Ref. No. 01 Part No. 330–33262 655018 02 03 290–32461 Description Qty. Req. Description Qty. Req. 16 092406 EDGING/DIRECTOR . . . . . . . . . . . . . . . . . 2 PIN/COTTER 3/16X1–1/4 . . . . . . . . . . . . 1 17 092204 SUPPORT/ASSY LT . . . . . . . . . . . . . . . . . . 1 CONTROL/FLUFFER ASSY . . . . . . . . . . . 1 650437 CB 5/16X5/8 . . . . . . . . . . . . . . . . . . . . . . . 4 070856 NUT/HEX LG FL SERR LOCK 5/16 . . . . 4 ROD/CONNECTING . . . . . . . . . . . . . . . . . 3 092201a SUPPORT/ASSY RT . . . . . . . . . . . . . . . . . 1 PIN/COTTER 1/8X3/4 (3/8 P) . . . . . . . . . 6 650437 CB 5/16X5/8 . . . . . . . . . . . . . . . . . . . . . . . 4 070856 NUT/HEX LG FL SERR LOCK 5/16 . . . . 4 PIN/COTTER 3/16X1–1/4 . . . . . . . . . . . . 1 400–32443 WASHER/SPECIAL . . . . . . . . . . . . . . . . . 1 650553 Part No. FLUFFER/ASSY . . . . . . . . . . . . . . . . . . . . . 1 655018 290–32462 Ref. No. 04 420–30377 GROMMET/RUBBER . . . . . . . . . . . . . . . . . 3 05 390–32643 RETAINER . . . . . . . . . . . . . . . . . . . . . . . . . . 2 076588 FLS 3/8X3/4 (FLN) . . . . . . . . . . . . . . . . . . 4 070856 NUT/HEX LG FL SERR LOCK 3/8 . . . . . 4 18 097335 WINDROWER/LT . . . . . . . . . . . . . . . . . . . . 1 650437 CB 5/16X5/8 . . . . . . . . . . . . . . . . . . . . . . . 3 651096 CB 5/16X1/2 . . . . . . . . . . . . . . . . . . . . . . . 6 06 220–32513 PIN/ASSY (3/8 P) . . . . . . . . . . . . . . . . . . . . 1 07 380–32348 SPRING/COMPRESSION . . . . . . . . . . . . . 1 070856 NUT/HEX LG FL SERR LOCK 5/16 . . . . 9 08 400–18916 WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 097334a WINDROWER/RT . . . . . . . . . . . . . . . . . . . . 1 09 220–18200 PIN/ROLL . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 650437 CB 5/16X5/8 . . . . . . . . . . . . . . . . . . . . . . . 3 10 090–32297 HANDLE/ASSY . . . . . . . . . . . . . . . . . . . . . . 1 651096 CB 5/16X1/2 . . . . . . . . . . . . . . . . . . . . . . . 6 11 076958 PIN/SPRING PLAIN . . . . . . . . . . . . . . . . . . 1 070856 NUT/HEX LG FL SERR LOCK 5/16 . . . . 9 12 097598 PLATE/SIDE BACKING . . . . . . . . . . . . . . . 2 13 097599 PLATE/CENTER BACKING . . . . . . . . . . . . 1 072330 19 390–32696 650949 SCREW/SELF TAPPING . . . . . . . . . . . . 12 STIFFENER/VEIN . . . . . . . . . . . . . . . . . . . . 2 THMS 5/16X3/4 (N,L,P) . . . . . . . . . . . . . . 6 14 330–33259 COVER/ASSY . . . . . . . . . . . . . . . . . . . . . . . 1 20 045–31404 BUSHING OILITE . . . . . . . . . . . . . . . . . . . . 2 15 092208 DIRECTOR/LEFT . . . . . . . . . . . . . . . . . . . . 1 21 420–33903 EDGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 22 097772 FRAME/TRAILER . . . . . . . . . . . . . . . . . . . . 1 650437 CB 5/16X5/8 (NILN,P) . . . . . . . . . . . . . . . 2 092207a DIRECTOR/RIGHT . . . . . . . . . . . . . . . . . . . 1 650437 CB 5/16X5/8 (NILN,P) . . . . . . . . . . . . . . . 2 Printed in U.S.A. a) NOT Illustrated. 11 906693/AP993 MC2175 – HEADER FRAME & CONDITIONER ROLLERS 6 7 4 5 23 3 4 22 6 8 4 9 2 20 21 1 10 19 11 12 13 18 24 25 17 14 25 16 15 906693/AP993 12 Printed in U.S.A. MC2175 – HEADER FRAME & CONDITIONER ROLLERS Ref. No. 01 Part No. 112905 650687 Description Qty. Req. SHIELD/ASSY RT . . . . . . . . . . . . . . . . . . . . 1 14 Part No. 330–33297 Description Qty. Req. SHIELD/BELT . . . . . . . . . . . . . . . . . . . . . . . 1 CB 5/16X3/4 (N,L,P) . . . . . . . . . . . . . . . . . 5 076588 FLS 3/8X3/4 . . . . . . . . . . . . . . . . . . . . . . . 5 070856 NUT/HEX LG FL SERR LOCK 3/8 . . . . . 5 02 290–32471 ROD/ASSY . . . . . . . . . . . . . . . . . . . . . . . . . 1 03 420–30377 GROMMET/RUBBER (5/16 P) . . . . . . . . . 1 04 220–16199 PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 05 112909 TOOL/ASSY . . . . . . . . . . . . . . . . . . . . . . . . 1 06 330–33283 DEFLECTOR/ASSY . . . . . . . . . . . . . . . . . . 2 076588 Ref. No. 15 097827 650834 SHOE/ROCK LT . . . . . . . . . . . . . . . . . . . . . 1 CB 1/2X1–1/2 (N,L,1P) . . . . . . . . . . . . . . 3 16 420–34436 PLUG/HOLE . . . . . . . . . . . . . . . . . . . . . . . . 2 17 126958 PUSH BAR/ASSY . . . . . . . . . . . . . . . . . . . . 1 650453 CS 1/2X1–1/2 (N,L) . . . . . . . . . . . . . . . . . 4 FLS 3/8X3/4 (FLN) . . . . . . . . . . . . . . . . . . 4 18 390–32658 LATCH (P 5/16) . . . . . . . . . . . . . . . . . . . . . . 2 07 126961 ROLL UPPER/LH SPIRAL . . . . . . . . . . . . . 1 19 380–32348 SPRING/COMPRESSION (LN 5/16) . . . . 2 08 126960 ROLL LOWER/RH SPIRAL . . . . . . . . . . . . 1 20 083397 SHIELD/END SICKLE . . . . . . . . . . . . . . . . 1 09 127158 650953 650490 SHIELD/TRANSMISSION ASSY . . . . . . . 1 THMS 3/8X3/4 (N,L) . . . . . . . . . . . . . . . . . 4 CS 3/8X1 (NILN,P) . . . . . . . . . . . . . . . . . . 1 21 126922 HEADER/FRAME ASSY . . . . . . . . . . . . . . 1 22 420–34437 PAD/END PANEL . . . . . . . . . . . . . . . . . . . . 2 23 420–34447 EDGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 10 610748 CATCH/KEEPER . . . . . . . . . . . . . . . . . . . . 2 11 078580 POUCH/MANUAL . . . . . . . . . . . . . . . . . . . . 1 24 420–34438 PAD/TRANSMISSION . . . . . . . . . . . . . . . . 1 12 068642 WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 4 25 126957 PLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 13 079923 RIVET/BLIND . . . . . . . . . . . . . . . . . . . . . . . 4 Printed in U.S.A. 650453 13 CS 1/2X1–1/2 (N,L) . . . . . . . . . . . . . . . . . 4 906693/AP993 MC2175 – CONDITIONER (LEFT SIDE) 9 11 12 13 10 14 4 15 5 6 7 6 8 1 2 3 2 906693/AP993 14 Printed in U.S.A. MC2175 – CONDITIONER (LEFT SIDE) Ref. No. Part No. Description Qty. Req. Ref. No. Part No. Description Qty. Req. 01 089867 COLLAR/BEARING . . . . . . . . . . . . . . . . . . 1 08 520195 COLLAR/BEARING . . . . . . . . . . . . . . . . . . 1 02 010–32322 FLANGETTE . . . . . . . . . . . . . . . . . . . . . . . . 2 09 480–27676 WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 1 651104 CB 5/8X3–1/4 (LN,L) . . . . . . . . . . . . . . . . 1 650495 CS 1/2X1–1/4 (L) . . . . . . . . . . . . . . . . . . . 4 03 089871 BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1 10 112705 BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . 1 04 056640 RING/RETAINING . . . . . . . . . . . . . . . . . . . 1 11 653029 NUT/HEX 3/4 . . . . . . . . . . . . . . . . . . . . . . . . 2 05 044090 SPACER (.135) . . . . . . . . . . . . . . . . . . . . . AR 12 126936 CS 3/4X5–1/2 GR8 . . . . . . . . . . . . . . . . . . . 1 400–27079 WASHER (.090) . . . . . . . . . . . . . . . . . . . . AR 13 125766 ARM/ROLL ASSY LT . . . . . . . . . . . . . . . . . 1 06 077601 RETAINER/BEARING 85MM . . . . . . . . . . . 2 14 380–32354 SPRING/ROLL ASSY (INCL 15) . . . . . . . . 1 CB 1/2X1–1/4 (LN) . . . . . . . . . . . . . . . . . . 4 15 385–27865 PLUG/SPRING . . . . . . . . . . . . . . . . . . . . . . 1 07 089872 650527 Printed in U.S.A. BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1 310–32513 15 CS 3/4X6 (N,P) . . . . . . . . . . . . . . . . . . . . . 1 906693/AP993 MC2175 – CONDITIONER (RIGHT SIDE) 30 11 1 1 5 7 4 3 10 5 7 9 29 28 27 8 3 26 4 25 8 6 2 6 12 16 2 9 20 17 16 Bolt Tightening Sequence for Timing Sprockets 18 19 20 22 21 23 21 24 31 15 13 14 1 11 12 8 9 2 3 7 4 10 3 5 6 906693/AP993 16 Printed in U.S.A. MC2175 – CONDITIONER (RIGHT SIDE) Ref. No. 01 Part No. 126939 Description Qty. Req. Ref. No. Part No. Description Qty. Req. SHIELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 16 077601 RETAINER/BEARING . . . . . . . . . . . . . . . . 2 650488 CS 3/8X3/4 (LN) . . . . . . . . . . . . . . . . . . . . 5 17 089872 BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1 650790 CB 3/8X3/4 (LN) . . . . . . . . . . . . . . . . . . . . 1 18 125894 ARM/ROLL ASSY RT . . . . . . . . . . . . . . . . . 1 650495 CS 1/2X1–1/4 (LN) . . . . . . . . . . . . . . . . . . 2 650527 CB 1/2X1–1/2 (LN) . . . . . . . . . . . . . . . . . . 4 02 520195 COLLAR/LOCK . . . . . . . . . . . . . . . . . . . . . . 2 19 6H154 WASHER/SHIM . . . . . . . . . . . . . . . . . . . . . AR 03 077601 RETAINER/BEARING 85MM . . . . . . . . . . . 2 20 091918 SPROCKET/IDLER#80X12T . . . . . . . . . . . 2 CS 1/2X1 (LN) . . . . . . . . . . . . . . . . . . . . . . 2 21 650163 CS 3/4X1–3/4 (L) . . . . . . . . . . . . . . . . . . . . . 2 650494 04 089872 BEARING/BALL . . . . . . . . . . . . . . . . . . . . . 1 22 125899 ARM/ASSY . . . . . . . . . . . . . . . . . . . . . . . . . 1 05 126948 SPKT/80A17T . . . . . . . . . . . . . . . . . . . . . . . 1 23 480–27676 WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 1 06 115727a ELEMENT/LOCKING 1–3/4 SHAFT . . . . . 1 24 310–32515 SCREW/SPECIAL (L 5/8) . . . . . . . . . . . . . 1 07 126951 CHAIN/ROLLER #80X62 . . . . . . . . . . . . . . 1 08 126949 SPKT/80A17T . . . . . . . . . . . . . . . . . . . . . . . 1 25 076313 YOKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 09 057557 WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 26 655006 CP 1/8X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 10 651277 CS 1/2X1–1/2 GR8 (L) . . . . . . . . . . . . . . . . 1 27 126940 SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 11 112705 BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . 1 28 H786B SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 12 480–27676 WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 1 651104 CB 5/8X3–1/4 (LN,L) . . . . . . . . . . . . . . . . 1 13 380–32354 SPRING/ROLL ASSY (INCL 14) . . . . . . . . 1 14 385–27865 PLUG/SPRING . . . . . . . . . . . . . . . . . . . . . . 1 15 310–32515 CS 3/4X6 (N,P) . . . . . . . . . . . . . . . . . . . . . . 1 Printed in U.S.A. 570014 FITTING/GREASE . . . . . . . . . . . . . . . . . . 1 29 H6208 WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 30 061937 CS 1/2X5–1/2 (N) . . . . . . . . . . . . . . . . . . . . 1 31 126936 CS 3/4X5–1/2 GR8 (2N) . . . . . . . . . . . . . . . 1 a) See inset for proper torquing sequence. 17 906693/AP993 MC2175 – PITMAN & WOBBLE ARM DRIVE 7 8 1 2 3 4 5 9 18 16 6 15 22 21 19 10 11 20 19 23 17 33 35 34 33 32 31 39 12 24 13 25 28 38 14 29 38 3-1/8 30 3-7/8 31 32 33 26 34 35 27 36 37 906693/AP993 18 Printed in U.S.A. MC2175 – PITMAN & WOBBLE ARM DRIVE Ref. No. Part No. Description Qty. Req. Ref. No. Part No. Description Qty. Req. 01 020–32214 V–BELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 22 02 260–32252 PULLEY 3 GROOVE 7–3/4 OD . . . . . . . . 1 23 126297 BEARING/ASSY . . . . . . . . . . . . . . . . . . . . . 1 03 045–31395 SPLIT TAPER BUSHING . . . . . . . . . . . . . . 1 24 520093 COLLAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (INCLUDES SCREWS) 25 098235 ARM/PITMAN ASSY . . . . . . . . . . . . . . . . . . 1 26 390–16339 CLAMP/PITMAN . . . . . . . . . . . . . . . . . . . . . 1 651113 CS 7/16X1–3/4 (N) . . . . . . . . . . . . . . . . . . 1 27 200–32366 SOCKET/ASSY (LONG) . . . . . . . . . . . . . . 1 117936 CS 5/16X2 FULL THREAD (L) . . . . . . . . 3 650198 SHSS–SL 1/4X3/8 . . . . . . . . . . . . . . . . . . 1 04 180–10909 KEY/SQ.HARD 1/4X2 . . . . . . . . . . . . . . . . . 1 05 360–21711 SHIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR 06 07 090086a GEARBOX/ASSEMBLED . . . . . . . . . . . . . 1 650494 CS 1/2X1 (L) . . . . . . . . . . . . . . . . . . . . . . . 4 045–31417 BUSHING/PIVOT . . . . . . . . . . . . . . . . . . . . 1 651119 CS 3/4X10 (N,L,2P) . . . . . . . . . . . . . . . . . 1 6H 154 08 240–32034 570014 09 220–21516 655006 350–32475c 651239 CS 1/2X2–1/2 GR8 (P) . . . . . . . . . . . . . . . 2 210–19530 NUT/LOCK FLANGE . . . . . . . . . . . . . . . . 2 570014 28 122892 650490 29 126938 650533 WASHER/SHIM . . . . . . . . . . . . . . . . . . . AR ARM/IDLER ASSY . . . . . . . . . . . . . . . . . . . 1 FITTING/GREASE . . . . . . . . . . . . . . . . . . 1 PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PIN/COTTER 1/8X1 . . . . . . . . . . . . . . . . . 1 RING/LOCKING . . . . . . . . . . . . . . . . . . . . . 1 FITTING/GREASE . . . . . . . . . . . . . . . . . . 1 WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 CS 3/8X1 (L) . . . . . . . . . . . . . . . . . . . . . . . 1 RETAINER . . . . . . . . . . . . . . . . . . . . . . . . . . 1 CS 3/8X1–1/2 (L) . . . . . . . . . . . . . . . . . . . 3 30 240–32035 ARM/WOBBLE ASSY . . . . . . . . . . . . . . . . . 1 31 520205 BEARING/CUP . . . . . . . . . . . . . . . . . . . . . . 1 32 520206 BEARING/CONE . . . . . . . . . . . . . . . . . . . . 2 33 360–14855 WASHER/SPECIAL . . . . . . . . . . . . . . . . . . 3 34 360–32510 SHIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR 10 250–19364 YOKE/ADJUSTING . . . . . . . . . . . . . . . . . . 1 11 290–32468 ROD/ADJUSTING (1/2N) . . . . . . . . . . . . . . 1 12 040–33350 ANCHOR/ASSY . . . . . . . . . . . . . . . . . . . . . 1 35 CS 1/2X1 (L,P) . . . . . . . . . . . . . . . . . . . . . 2 36 126942 ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 37 030–31908 WOBBLE ARM PIVOT BOLT . . . . . . . . . . 1 650494 081377 070856 126943 FLS 3/8X1–1/4 (FLN) . . . . . . . . . . . . . . . . 2 NUT/HEX LG FL SERR LOCK 3/8 . . . . . 2 BUSHING/STEEL (PRESS IN FRAME) . . 2 13 360–32512 SPACER (2 1/2N,1P) . . . . . . . . . . . . . . . . . 1 14 380–25728 SPRING/COMPRESSION . . . . . . . . . . . . . 1 650933 NUT/SLOTTED 1” . . . . . . . . . . . . . . . . . . 1 SHIELD/DRIVELINE (INCL 20) . . . . . . . . . 1 655024 PIN/COTTER 3/16X2 . . . . . . . . . . . . . . . . 1 15 126341 656093 16 126342 FLAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 17 260–32253 PULLEY/PITMAN . . . . . . . . . . . . . . . . . . . . 1 18 260–25753 IDLER/FLAT BELT . . . . . . . . . . . . . . . . . . . 1 650886 CS 1/2X6–1/2 (N,L,P) . . . . . . . . . . . . . . . . 1 19 045–31396b ELEMENT/LOCKING SET . . . . . . . . . . . . . 2 20 360–32507 SPACER/LONG . . . . . . . . . . . . . . . . . . . . . 1 21 124472c FLANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 650491 CS 3/8X1–1/4 . . . . . . . . . . . . . . . . . . . . . . 6 Printed in U.S.A. 38 CS M8X16 (P) . . . . . . . . . . . . . . . . . . . . . . 4 39 360–32511 SHIM 1/16” . . . . . . . . . . . . . . . . . . . . . . . . . AR 360–32520 SHIM 1/32” . . . . . . . . . . . . . . . . . . . . . . . . . AR 200–32448 SOCKET/ASSY (SHORT) . . . . . . . . . . . . . 1 651240 CS 1/2X3 GR8 . . . . . . . . . . . . . . . . . . . . . 2 210–19530 NUT/LOCK FLANGE . . . . . . . . . . . . . . . . 2 076002 FITTING/GREASE . . . . . . . . . . . . . . . . . . 1 a) For breakdown, see Components page titled Gearbox. b) For proper assembly procedure, see the Service chapter of the Operator’s Manual. c) For proper torquing sequence, see the Service chapter of the Operator’s Manual. 19 906693/AP993 MC2175 – REEL VARIABLE DRIVE 1 2 1 3 1 2 6 1 7 4 9 8 10 5 11 7 12 13 14 15 906693/AP993 20 Printed in U.S.A. MC2175 – REEL VARIABLE DRIVE Ref. No. 01 Part No. 027003 650704 Description Qty. Req. FLANGETTE . . . . . . . . . . . . . . . . . . . . . . . . 4 520065 BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 03 520085 COLLAR/LOCK . . . . . . . . . . . . . . . . . . . . . . 2 04 320–32578 JACKSHAFT . . . . . . . . . . . . . . . . . . . . . . . . 1 05 220–19812 PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 06 07 370–32113 098032 064422 08 360–32505 Printed in U.S.A. 09 CB 3/8X1 (N,L) . . . . . . . . . . . . . . . . . . . . . 6 02 650553 Ref. No. Part No. 010–32392 650786 Qty. Req. FLANGE/BEARING . . . . . . . . . . . . . . . . . . 1 CB 3/8X1–1/4 (N,L,P) . . . . . . . . . . . . . . . . 3 10 520159 COLLAR/BEARING . . . . . . . . . . . . . . . . . . 1 11 370–32142 SPROCKET/11T . . . . . . . . . . . . . . . . . . . . . 1 650338 12 PIN/COTTER 1/8X3/4 (P 5/16) . . . . . . . . 1 Description 500076 SHSS 1/4–20 . . . . . . . . . . . . . . . . . . . . . . 2 CHAIN/ROLLER #50X58 LINKS . . . . . . . . 1 13 004942 KEY 1/4X1 . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PULLEY/HALF . . . . . . . . . . . . . . . . . . . . . . 2 14 360–32506 SPACER/IDLER . . . . . . . . . . . . . . . . . . . . . 1 FLS 3/8X1–1/2 . . . . . . . . . . . . . . . . . . . . . 4 15 370–18061 SPROCKET/IDLER . . . . . . . . . . . . . . . . . . 1 651104 CB 5/8X3–1/4 (N,L 5/8, 2P 7/8) . . . . . . . . 1 SPROCKET/ASSY 50T . . . . . . . . . . . . . . . 1 SHIM 7/64″ . . . . . . . . . . . . . . . . . . . . . . . . . 5 21 906693/AP993 MC2175 – REEL 906693/AP993 22 Printed in U.S.A. MC2175 – REEL Ref. No. Part No. Description Qty. Req. Ref. No. 17 Part No. 120–32774 Description Qty. Req. CAM/ASSY . . . . . . . . . . . . . . . . . . . . . . . . . 1 01 120–32773 REEL/WLDMT . . . . . . . . . . . . . . . . . . . . . . . 1 02 520085 COLLAR/LOCK . . . . . . . . . . . . . . . . . . . . . . 2 650527 CB 1/2X1–1/4 (N,L,P) . . . . . . . . . . . . . . . . 3 03 027003 FLANGETTE . . . . . . . . . . . . . . . . . . . . . . . . 4 650786 CB 3/8X1–1/4 (N,L,P) . . . . . . . . . . . . . . . . 2 04 520065 BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 18 126937 STRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 05 040–33351 MOUNT/BEARING RIGHT . . . . . . . . . . . . 1 19 650704 CB 3/8X1 (P) . . . . . . . . . . . . . . . . . . . . . . . 24 06 390–32657 07 260–32251 08 180–10909 09 020–32215 V–BELT (HC90) . . . . . . . . . . . . . . . . . . . . . . 1 10 380–14677 SPRING/EXTENSION . . . . . . . . . . . . . . . . 1 11 030–31888 BOLT/EYE (1) 3/8 P,2N . . . . . . . . . . . . . . . 1 12 048182 IDLER/FLAT BELT . . . . . . . . . . . . . . . . . . . 1 26 125751 HOUSING/TINE BAR . . . . . . . . . . . . . . . . 12 13 360–32513 SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 27 010–32388 BEARING/PLASTIC . . . . . . . . . . . . . . . . . 12 14 240–32036 CS 5/16X2–1/4 GR8 (P) . . . . . . . . . . . . . . 48 650704 650527 061930 650243 650860 CB 3/8X1 (N,L) . . . . . . . . . . . . . . . . . . . . . 3 210–19533 CB 3/8X1–3/4 (N,L,2P) . . . . . . . . . . . . . . 1 CB 1/2X1–1/4 (N,L,P) . . . . . . . . . . . . . . . . 3 20 STRAP/ADJUSTING . . . . . . . . . . . . . . . . . 1 21 110–32416 BAT/REEL . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FLN 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . 24 CS 1/2X4 (N,L) . . . . . . . . . . . . . . . . . . . . . 1 22 310–16296 CS 5/8X2–1/4 (N,L) . . . . . . . . . . . . . . . . . . . 4 PULLEY 20″ DIA 1–1/4 BORE . . . . . . . . . 1 23 076159 BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SQHSS 1/2X1–1/4 (JN) . . . . . . . . . . . . . . 2 24 400–10627 WASHER/SPECIAL . . . . . . . . . . . . . . . . . AR KEY/1/4X1 . . . . . . . . . . . . . . . . . . . . . . . . . . 1 25 090796 BAR/TINE ASSY LONG . . . . . . . . . . . . . . . 2 651162 090770 650486 PIN/COTTER 5/16X2 . . . . . . . . . . . . . . . . 4 BAR/TINE ASSY SHORT . . . . . . . . . . . . . 2 CS 5/16X3/4 (FLN,L,12P) . . . . . . . . . . . 24 ARM/IDLER WLDMT . . . . . . . . . . . . . . . . . 1 28 650977 650644 CS 1/2X3 (N,L) . . . . . . . . . . . . . . . . . . . . . 1 29 054031 CLIP/TINE . . . . . . . . . . . . . . . . . . . . . . . . . 48 650821 CS 5/8X1 (L,P) . . . . . . . . . . . . . . . . . . . . . 1 30 210–31017 NUT/SPECIAL . . . . . . . . . . . . . . . . . . . . . . 48 15 200–32509 PIVOT/WLDMT . . . . . . . . . . . . . . . . . . . . . . 1 31 110–32354 TINE/DOUBLE . . . . . . . . . . . . . . . . . . . . . 48 16 030–13498 ROD/END (2 3/8 L,P, 1 3/8 N–NF) . . . . . . 1 32 220–32566 PIN/TINE BEARING . . . . . . . . . . . . . . . . . 12 Printed in U.S.A. 23 906693/AP993 MC2175 – SICKLE & GUARDS 13 14 2 3 11 2 4 1 5 12 6 8 9 7 Use on Drive End ONLY 10 7 Regular Guards Stub Guards 15 20 19 18 17 16 21 906693/AP993 24 Printed in U.S.A. MC2175 – SICKLE & GUARDS Ref. No. 01 02 Part No. 110–32342 Description Qty. Req. Ref. No. GUARD/SICKLE HVY DUTY . . . . . . . . . . 18 650495 CS 1/2X1–1/4 (LN) . . . . . . . . . . . . . . . . . . 2 650527 CS 1/2X1–1/4 (LN) . . . . . . . . . . . . . . . . . 15 650791 CS 1/2X1–3/4 (LN) . . . . . . . . . . . . . . . . . . 3 650834 CS 1/2X1–1/2 (LN) . . . . . . . . . . . . . . . . . 18 110–10655 SHIM 1/32 . . . . . . . . . . . . . . . . . . . . . . . . . AR 03 126320 CLIP/HOLDDOWN . . . . . . . . . . . . . . . . . . . 8 04 110–32323 CLIP/HOLDDOWN HIGH ARCH . . . . . . . 1 19 Part No. Description Qty. Req. 124737c SECTION/TOP SERRATED . . . . . . . . . . 35 H7547Ad SECTION/UNDER SERRATED . . . . . . . 35 050056e SECTION/OVER SERRATED . . . . . . . . . 35 (CHROMED) 060635f SECTION/UNDER SERRATED . . . . . . . 35 (CHROMED) 20 091572g (OVER SICKLE HEAD) SECTION/END RT . . . . . . . . . . . . . . . . . . . 1 (TOP SERRATED) 05 360–32359 SHIM 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . AR 06 110–32405 GUARD/SPECIAL DRIVE END . . . . . . . . 1 07 097997 CLIP/SKID SHOE . . . . . . . . . . . . . . . . . . . . 6 08 110–32410 GUARD/SICKLE SPECIAL RH . . . . . . . . . 1 091384i 09 110–32330 GUARD/STUB . . . . . . . . . . . . . . . . . . . . . . 17 091385j BOLT/#12–24X5/8 GR8 . . . . . . . . . . . . . 65 091386 NUT/LOCK #12–24 GR8 . . . . . . . . . . . . 76 650453 CS 1/2X1–1/2 (LN) . . . . . . . . . . . . . . . . . . 2 650791 CB 1/2X1–3/4 (LN) . . . . . . . . . . . . . . . . . . 3 650834 CB 1/2X1–1/2 (LN) . . . . . . . . . . . . . . . . . . 1 030–31887 CB 1/2X2–1/2 (2LN) . . . . . . . . . . . . . . . . 29 097995 091382h SECTION/END RT . . . . . . . . . . . . . . . . . . . 1 (UNDER SERRATED) 21 090692 BOLT/#12–24X7/8 GR8 . . . . . . . . . . . . . . 11 SICKLE W/O HEAD (BOLT ON) . . . . . . . . 1 (TOP SERRATED) 090620 CB 1/2X2–3/4 (2LN) . . . . . . . . . . . . . . . . . 3 SICKLE W/O HEAD (BOLT ON) . . . . . . . . 1 10 110–32409 GUARD/SICKLE SPECIAL LH . . . . . . . . . 1 (UNDER SERRATED) 11 110–32334 HOLDDOWN CLIP STUB GUARD . . . . . 16 CONVERSION KITS: 12 110–32341 CLIP HOLDDOWN HIGH ARCH . . . . . . . 2 13 360–32404 SHIM 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . 17 14 110–32349 CLIP/ADJUSTMENT . . . . . . . . . . . . . . . . 32 15 110–32316 HEAD/SICKLE . . . . . . . . . . . . . . . . . . . . . . . 1 16 390–16339 CLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 651113 CS 7/16X1–3/4 (N) . . . . . . . . . . . . . . . . . . 1 17 091387 WASHER/HEX . . . . . . . . . . . . . . . . . . . . . . 1 18 091571a SECTION/END LT . . . . . . . . . . . . . . . . . . . 1 For Conversion Kit to install Regular Guards on 2175, order 088743. For Conversion Kit to install Stub Guards on 2175, order 190–32585. a) For box of (10) Left Half Sections, order 091125. b) For box of (10) Left Half Sections, order 091569. c) For box of (25) Top Serrated Sections, order 126300. d) For box of (25) Under Serrated Sections, order 083486. e) For box of (25) Chrome Over Serrated Sections, order 600190. f) For box of (25) Chrome Under Serrated Sections, order 060737. g) For box of (10) Right Half Sections, order 091126. h) For box of (10) Right Half Sections, order 091570. i) For box of (25) Screws W/Nuts, order 090052. j) For box of (50) Screws W/Nuts, order 090095. (TOP SERRATED) 091383b SECTION/END LT . . . . . . . . . . . . . . . . . . . 1 (UNDER SERRATED) Printed in U.S.A. 25 906693/AP993 MC2175 – COMPONENTS (TOWER–TO–GEARBOX PTO) 8 6 7 1 6 5 3 4 3 2 11 10 3 Ref. No. Part No. Description 3 12 Qty. Req. 01 094154 DRIVE/UNIVESAL ASSMD . . . . . . . . . . . . 1 02 091374 SHIELD/OUTER . . . . . . . . . . . . . . . . . . . . . 1 03 510100 RETAINER/BEARING . . . . . . . . . . . . . . . . 4 04 510223 BEARING/NYLON . . . . . . . . . . . . . . . . . . . 1 05 091373 YOKE & SHAFT . . . . . . . . . . . . . . . . . . . . . 1 06 510114 07 091377 906693/AP993 9 Ref. No. 08 Part No. 094134 651240 Description Qty. Req. JOINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 CS 1/2X3 GR8 (N,L) . . . . . . . . . . . . . . . . . 2 09 092015 BEARING/NYLON . . . . . . . . . . . . . . . . . . . 1 10 091376 SHIELD/TUBE END . . . . . . . . . . . . . . . . . . 1 KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2 11 084242 BEARING/CENTRALIZER . . . . . . . . . . . . . 1 HOUSING/CENTER ASSY . . . . . . . . . . . . 1 12 094155 STUB PLUG W/TUBE . . . . . . . . . . . . . . . . 1 26 Printed in U.S.A. MC2175 – COMPONENTS (TOWER–TO–TRACTOR PTO) 17 1 Tractor End 7 5 6 5 11 18 16 12 1314 4 Tower End 10 11 14 13 12 16 3 18 3 9 2 5 6 5 15 8 Ref. No. Part No. Description Qty. Req. Ref. No. Part No. Description Qty. Req. 01 094157 JOINT/UNIV W/TUBE . . . . . . . . . . . . . . . . 1 10 089205 YOKE/QUIK–LOCK ASSY . . . . . . . . . . . . . 1 02 094142 YOKE/SPRING LOCK ASSY . . . . . . . . . . 1 11 086928 BALL/STAINLESS 3/8 . . . . . . . . . . . . . . . . 5 03 510114 KIT/CENTER CROSS . . . . . . . . . . . . . . . . 2 12 086927 SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 04 320–32615 YOKE/TUBE ASSY . . . . . . . . . . . . . . . . . . . 1 13 086926 COLLAR ASSY . . . . . . . . . . . . . . . . . . . . . . 2 05 510100 RETAINER/BEARING . . . . . . . . . . . . . . . . 4 14 350–32485 RING/RETAINING . . . . . . . . . . . . . . . . . . . 2 06 510023 BEARING/NYLON . . . . . . . . . . . . . . . . . . . 2 15 089286 DRIVE/MALE HALF ASSY . . . . . . . . . . . . 1 07 089207 GUARD/INNER ASSY . . . . . . . . . . . . . . . . 1 16 086931 WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 08 089960 GUARD/OUTER . . . . . . . . . . . . . . . . . . . . . 1 17 084242 CENTRALIZER . . . . . . . . . . . . . . . . . . . . . . 1 09 320–32616 YOKE/SHAFT ASSY . . . . . . . . . . . . . . . . . 1 18 086930 COVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Printed in U.S.A. 27 906693/AP993 MC2175 – COMPONENTS (HITCHJACK) 5 7 6 6 8 4 3 4 2 Early Style 1 Ref. No. Part No. 088841 Description Qty. Req. Ref. No. HITCHJACK - WESBAR . . . . . . . . . . . . . . 1 CONSISTS OF: Part No. Description Qty. Req. 05 077838 CAP/TOP . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 06 094283 KIT/INTERNAL PARTS . . . . . . . . . . . . . . . 1 01 061276 PIN & CHAIN . . . . . . . . . . . . . . . . . . . . . . . . 1 02 081462 TUBE/INNER ASSY . . . . . . . . . . . . . . . . . . 1 07 077836 KIT/GEAR . . . . . . . . . . . . . . . . . . . . . . . . . . 1 03 092021 TUBE/OUTER . . . . . . . . . . . . . . . . . . . . . . . 1 08 077839a SHAFT/CROSS . . . . . . . . . . . . . . . . . . . . . . 1 04 126735 HANDLE (LATER STYLE) . . . . . . . . . . . . . 1 081463a HANDLE & NUT (EARLY STYLE) . . . . . . 1 906693/AP993 a) Replaced by 126735 later style Handle. 28 Printed in U.S.A. MC2175 – COMPONENTS (GEARBOX) Ref. No. Part No. 090086 Description Qty. Req. Ref. No. GEARBOX/ASSY . . . . . . . . . . . . . . . . . . . . 1 CONSISTS OF: Part No. Description Qty. Req. 10 090094 SHAFT/OUTPUT . . . . . . . . . . . . . . . . . . . . 1 12 090096 PINION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 01 090087 HOUSING/GEARBOX . . . . . . . . . . . . . . . . 1 13 090097 PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 02 090088 BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 14 090098 DIPSTICK/OIL . . . . . . . . . . . . . . . . . . . . . . . 1 03 089133 RING/SNAP . . . . . . . . . . . . . . . . . . . . . . . . . 3 15 090099 GASKET/GEARBOX COVER . . . . . . . . . . 1 04 090089 SPACER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 16 090493 COVER/GEARBOX . . . . . . . . . . . . . . . . . . 1 05 090090 SEAL/OIL . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 17 090494 BOLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 06 084595 SHIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 18 089131 CAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 07 090091 SHAFT/INPUT . . . . . . . . . . . . . . . . . . . . . . . 1 19 090495 WASHER/SPRING . . . . . . . . . . . . . . . . . . . 1 08 090092 RING/RETAINING . . . . . . . . . . . . . . . . . . . 1 20 090496 GEAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 09 090093 LOCKNUT . . . . . . . . . . . . . . . . . . . . . . . . . . 1 21 089134 SHIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Printed in U.S.A. 29 906693/AP993 MC2175 – OPTIONS & ACCESSORIES 804861 Hydraulic Tongue Positioner 8 9 5 4 7 6 1 7 2 3 Ref. No. Part No. Description Qty. Req. Ref. No. Part No. Description Qty. Req. 01 097597 HOSE/ASSY . . . . . . . . . . . . . . . . . . . . . . . . 1 06 066452 PIN/LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . 1 02 580116 ELBOW/HYD FITTING 90 DEG . . . . . . . . 1 07 097860 CLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 03 058757 ELBOW/HYD FITTING 90 DEG . . . . . . . . 1 08 097918 PIN/COTTER . . . . . . . . . . . . . . . . . . . . . . . . 2 09 076099 COTTER/HAIR PIN . . . . . . . . . . . . . . . . . . 2 (WITH .06 ORIFICE) 04 05 083357a 040–33352 CYLINDER/HYDRAULIC . . . . . . . . . . . . . . 1 LOCK/CYLINDER . . . . . . . . . . . . . . . . . . . . 1 a) For replacement Seal Kit order 084159. 803564 Mechanical Tongue Positioner 2 3 5 4 1 6 Ref. No. Part No. 803564 Description Qty. Req. Ref. No. CONROLT/MECHANICAL HITCH . . . . . . 1 04 CONSISTS OF: 01 125235 POSITIONER/OUTSIDE . . . . . . . . . . . . . . 1 02 220–32529 PIN/CYLINDER . . . . . . . . . . . . . . . . . . . . . . 2 076099 03 380–10448 906693/AP993 Part No. 090–32306 Description Qty. Req. HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 650491 CS 3/8X1-1/4 . . . . . . . . . . . . . . . . . . . . . . . 1 650533 CS 3/8X1-1/2 . . . . . . . . . . . . . . . . . . . . . . . 1 COTTER/HAIR PIN . . . . . . . . . . . . . . . . . 2 05 068209 CORD/CONTROL . . . . . . . . . . . . . . . . . . . . 1 SPRING/EXTENSION . . . . . . . . . . . . . . . . 1 06 480–42010 CLEVIS WLDMNT, INSIDE . . . . . . . . . . . . 1 30 Printed in U.S.A. MC2175 – OPTIONS & ACCESSORIES 806188 Transport Light Kit 4(8) 2 804891 Cutterbar Wear Plate 5(8) 6(8) 7(8) 3 1 1 8(2) 10 Ref. No. 9 Part No. Qty. Req. Description 804891 GUARD/MC2175 ROCK . . . . . . . . . . . . . . 1 089767 PLATE/WEAR ASSY . . . . . . . . . . . . . . . . . 2 CONSISTS OF: 01 650791 CB 1/2X1–3/4 . . . . . . . . . . . . . . . . . . . . . . 8 803584 Tall Crop Divider Ref. No. Part No. 806188 Description Qty. Req. LIGHTS/DC MC TRANSPORT . . . . . . . . . 1 CONSISTS OF: 01 112884 LIGHT/TRANSPORT LT . . . . . . . . . . . . . . . 1 02 112885 LIGHT/TRANSPORT RT . . . . . . . . . . . . . . 1 03 112886 HOLDER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 04 125946 BASE/MOUNTING . . . . . . . . . . . . . . . . . . . 8 05 055648 TIE/WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 06 650426 CS 1/4X1–1/4 . . . . . . . . . . . . . . . . . . . . . . . 8 07 071401 NUT/NYLON INSERT LOCK 1/4 . . . . . . . . 8 08 112706 SUPPORT/LIGHT . . . . . . . . . . . . . . . . . . . . 2 Ref. No. 09 112893 HARNESS/“Y” . . . . . . . . . . . . . . . . . . . . . . . 1 01 10 112898 HARNESS/PRIMARY . . . . . . . . . . . . . . . . . 1 Printed in U.S.A. 1 Part No. 290–32472 650731 31 Description Qty. Req. DIVIDER/TALL CROP . . . . . . . . . . . . . . . . 1 CS 3/8X3–1/2 (N,L) . . . . . . . . . . . . . . . . . 2 906693/AP993 MC2175 – OPTIONS & ACCESSORIES 804681 Center Skid Shoe 803098 Safety Tow Chain 10 Ton 5 1 1 6 2 4 3 2 4 3 Ref. No. Part No. 804681 Description Qty. Req. CENTER SKID SHOE KIT . . . . . . . . . . . . . 1 CONSISTS OF: 01 076099 COTTER/HAIR PIN . . . . . . . . . . . . . . . . . . 1 02 220–32528 PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 03 330–33296a SHOE/SKID ASSY . . . . . . . . . . . . . . . . . . . 1 Ref. No. Part No. Description Qty. Req. 803098 CHAIN/SAFETY TOW 10 TON . . . . . . . . . 1 01 043912 WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 02 069076 WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 03 080894 CLEVIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 04 650172 CS 3/4X3–1/4 (N,L) . . . . . . . . . . . . . . . . . . . 1 05 650695 CS 5/8X3–1/2 (N,L) . . . . . . . . . . . . . . . . . . . 1 06 654014 WASHER/PLAIN WIDE 3/4 . . . . . . . . . . . . 1 CONSISTS OF: 04 097997 CLIP/SKID SHOE . . . . . . . . . . . . . . . . . . . . 3 a) Unit is equipped with (2) Skid Shoes as standard equipment 906693/AP993 32 Printed in U.S.A. Notes Printed in U.S.A. 33 906693/AP993 MC2175 - NUMERICAL INDEX Part No. Page No. Ref. No. 6H154 17 19 H786B 17 H6208 17 H7547A 004942 Part No. Page No. Ref. No. 078580 13 11 28 079716 09 29 079923 13 25 19 080894 21 13 081377 Part No. Page No. Ref. No. Part No. Page No. Ref. No. 090091 29 07 097598 11 12 02 090092 29 08 13 090093 29 09 097599 11 13 097772 07 02 32 03 090094 29 10 07 13 090096 29 12 097772 11 22 097775 04 02 13 15 027003 21 01 081462 28 02 090097 29 13 097827 027003 23 03 081463 28 04 090098 29 14 097859 04 04 08 10 042162 09 11 082620 09 01 090099 29 15 097859 042163 09 03 082620 07 22 090493 29 16 097860 30 07 30 08 043912 32 01 082621 09 17 090494 29 17 097918 044090 15 05 082621 07 32 090495 29 19 097997 32 04 20 097997 25 07 21 07 045582 09 16 082623 09 090496 01 29 046000 09 12 082623 07 22 090620 25 21 098032 046001 09 13 083357 30 04 090692 25 21 098235 19 25 111377 07 36 112705 15 10 112705 17 11 112706 31 08 112884 31 01 112885 31 02 112886 31 03 112893 31 09 112898 31 10 112905 13 01 112909 13 05 115727 17 06 117085 08 13 117085 07 21 117086 08 02 117927 08 04 122892 19 28 124128 08 11 047269 07 40 083397 13 20 090770 23 25 048182 23 12 084242 26 11 090796 23 25 049038 07 35 084242 27 091373 17 26 05 050056 25 19 084595 29 06 091374 26 02 054031 23 29 086926 27 13 091376 26 10 055648 31 05 086927 27 12 091377 26 07 056640 15 04 086928 27 11 091382 25 20 057557 17 09 086930 27 18 091383 25 18 058757 30 03 086931 27 16 091384 25 20 059743 04 09 087756 04 07 091385 25 20 060635 25 19 087758 04 08 091386 25 20 061276 28 01 088841 28 091387 25 17 061937 17 30 088841 04 06 091571 25 18 066452 30 06 089131 29 18 091572 25 20 066717 09 06 089133 29 03 091870 09 04 068209 30 05 089134 29 21 091918 17 20 068642 13 12 089205 27 10 092015 26 09 069076 32 02 089207 27 07 092021 28 03 124472 19 21 070856 07 19 089286 27 15 092201 11 17 124484 04 12 071401 31 07 089767 31 01 092204 11 17 124667 07 39 076099 32 01 089867 15 01 092207 11 15 124737 25 19 076099 30 09 089871 15 03 092208 11 15 125235 30 01 076159 23 23 089872 17 04 092406 11 16 125421 04 05 076313 17 25 089872 15 07 094134 26 08 125421 08 14 076586 09 09 089872 17 17 094142 27 02 125751 23 26 076958 11 11 089960 27 08 094154 26 01 125766 15 13 077601 17 03 090086 29 094155 26 12 125882 07 37 077601 15 06 090086 19 06 094157 27 01 125883 07 38 077601 17 16 090087 29 01 094283 28 06 125894 17 18 077836 28 07 090088 29 02 097334 11 18 125899 17 22 077838 28 05 090089 29 04 097335 11 18 125946 31 04 077839 28 08 090090 29 05 097597 30 01 126297 19 23 906693/AP993 34 Printed in U.S.A. MC2175 - NUMERICAL INDEX Part No. Page No. Ref. No. 126320 25 03 126341 19 126342 04 126342 126375 Part No. Page No. Ref. No. 610748 13 10 15 650163 17 11 650172 32 19 16 650426 04 10 650695 Part No. Page No. Ref. No. Part No. Page No. Ref. No. 110–32323 25 04 260–25753 19 18 21 110–32330 25 09 260–32251 23 07 04 110–32334 25 11 260–32252 19 02 31 06 110–32341 25 12 260–32253 19 17 32 05 110–32342 25 01 290–32461 11 02 11 03 126735 28 04 650704 23 19 110–32349 25 14 290–32462 126739 09 15 650977 23 28 110–32354 23 31 290–32468 19 11 13 02 126922 13 21 651277 17 10 110–32405 25 06 290–32471 126936 15 12 653029 15 11 110–32409 25 10 290–32472 31 01 23 22 126936 17 31 653102 09 07 110–32410 25 08 310–16296 126937 23 18 654014 32 06 110–32416 23 21 310–32513 08 07 01 310–32515 17 15 17 24 126938 19 29 655006 17 126939 17 01 655010 09 126940 17 27 803098 32 126942 19 36 803098 04 126943 19 35 803564 30 126948 17 05 803584 120–32773 26 08 15 120–32774 23 17 310–32515 180–10909 19 04 320–32578 21 04 320–32615 27 04 320–32616 27 09 330–33259 11 14 330–33262 11 01 330–33269 04 01 330–33279 07 07 330–33283 13 06 330–33296 32 03 330–33297 13 14 350–32475 19 22 350–32485 27 14 360–14855 19 33 360–21711 19 05 360–32359 25 05 360–32404 25 13 360–32499 07 06 360–32500 07 04 360–32505 21 08 180–10909 23 08 200–32366 19 27 200–32448 31 23 19 39 126949 17 08 804681 32 200–32504 07 24 126951 17 07 804861 30 200–32505 07 27 126957 13 25 804891 31 200–32506 07 08 126958 13 17 806188 31 200–32507 07 11 126960 13 08 010–32322 15 02 200–32509 23 15 126961 13 07 010–32388 23 27 210–19533 23 20 127158 13 09 010–32392 21 09 210–31017 23 30 500076 21 12 020–32214 19 01 220–16199 13 04 510023 27 06 020–32215 23 09 220–18200 11 09 510100 26 03 030–13498 23 16 220–19812 21 05 510100 27 05 030–17662 08 01 220–21516 19 09 510114 27 03 030–17662 07 03 220–32513 11 06 510114 26 06 030–31888 23 11 220–32514 04 03 510223 26 04 030–31904 07 12 220–32515 07 30 520054 09 14 030–31908 19 37 220–32516 07 01 360–32506 21 14 520065 21 02 040–33325 07 29 220–32517 07 14 360–32507 19 20 520065 23 04 040–33350 19 12 220–32518 08 08 360–32510 19 34 520085 23 02 040–33351 23 05 220–32519 07 31 360–32511 19 38 520085 21 03 040–33352 30 05 220–32520 07 23 360–32512 19 13 520092 04 13 045–31395 19 03 220–32528 32 02 360–32513 23 13 520093 04 14 045–31396 19 19 220–32529 30 02 360–32520 19 38 520093 19 24 045–31404 11 20 220–32566 23 32 370–18061 21 15 520159 21 10 045–31406 07 20 240–32029 08 04 370–32113 21 06 520195 17 02 045–31407 07 05 240–32034 19 08 370–32142 21 11 520195 15 08 045–31417 19 07 240–32035 19 30 380–10448 30 03 520201 09 05 090–32297 11 10 240–32036 23 14 380–14677 23 10 520205 19 31 090–32306 30 04 240–32043 07 18 380–25728 19 14 520206 19 32 110–10655 25 02 250–19364 19 10 380–32342 07 28 580116 30 02 110–32316 25 15 250–32506 07 09 380–32348 11 07 Printed in U.S.A. 35 906693/AP993 MC2175 - NUMERICAL INDEX Part No. Page No. Ref. No. 380–32348 13 19 390–16339 380–32350 07 10 390–32643 380–32351 08 03 390–32657 380–32354 17 13 390–32658 13 18 380–32354 15 14 390–32696 11 19 385–27865 17 14 400–10627 23 24 385–27865 15 15 400–18916 11 385–27865 07 33 400–21904 390–16339 25 16 400–27079 906693/AP993 Part No. Page No. Ref. No. 19 26 11 23 Part No. Page No. Ref. No. Part No. Page No. Ref. No. 400–32443 08 09 420–34447 13 23 05 420–30377 13 03 480–27676 08 06 06 420–30377 11 04 480–27676 15 09 420–33066 08 12 480–27676 17 12 420–33903 11 21 480–27676 17 23 08 420–34436 13 16 480–27676 07 26 07 25 420–34437 13 22 480–42010 30 06 15 05 420–34438 13 24 480–42349 07 34 36 Printed in U.S.A. TORQUE SPECIFICATIONS NOTE: Use these torque values when tightening GEHL hardware (excluding: Locknuts and Self–tapping, Thread Forming and Sheet Metal Screws) unless specified otherwise. All torque values are in Lb-Ft except those marked with an * which are Lb-In (For metric torque value Nm, multiply Lb-Ft value by 1.355 or Lb-In value by 0.113) Unified National Thread Grade 2 Grade 5 Grade 8 Dry Lubed Dry Lubed Dry Lubed 8-32 8-36 19* 20* 14* 15* 30* 31* 22* 23* 41* 43* 31* 32* 10-24 10-32 27* 31* 21* 23* 43* 49* 32* 36* 60* 68* 45* 51* 1/4-20 1/4-28 66* 76* 50* 56* 9 10 75* 86* 12 14 9 10 5/16-18 5/16-24 11 12 9 17 19 13 14 25 18 20 3/8-16 3/8-24 20 23 15 17 30 35 23 25 45 50 35 7/16-14 7/16-20 32 36 24 27 50 55 35 40 70 80 55 60 1/2-13 1/2-20 50 55 35 40 75 90 55 65 110 120 80 90 9/16-12 9/16-18 70 80 55 60 110 120 80 90 150 170 110 130 5/8-11 5/8-18 100 110 75 85 150 180 110 130 220 240 170 180 3/4-10 3/4-16 175 200 130 150 260 300 200 220 380 420 280 320 7/8-9 7/8-14 170 180 125 140 430 470 320 360 600 660 460 500 1-8 1-14 250 270 190 210 640 710 480 530 900 1000 680 740 Attaching Hardware Size & Description Part Number Size & Description Part Number Size & Description Part Number Size & Description Part Number #6 L #6–32 N #6 P #10 L #10–24 N #10–32 N #10 P #12 L #12–24 N 1/4 L 654044 650658 654848 650549 650550 650648 650584 650813 650627 654022 1/4 LN 1/4 N 1/4 P 5/16 FLN 5/16 JN 5/16 L 5/16 LN 5/16 N 5/16 P 3/8 JN 071700 653005 654002 070648 653034 654024 071701 653007 654004 653038 3/8 L 3/8 LN 3/8 N 3/8 NILN 3/8 P 3/8 WN 1/2 JN 1/2 L 1/2 LN 1/2 N 654026 071703 653010 067847 654006 653098 071706 654030 071706 653018 1/2 P 5/8 L 5/8 LN 5/8 N 5/8 P 3/4 L 3/4 LN 3/4 N 3/4 P 7/8 NF–SN 654009 654032 071709 653021 654012 654034 064331 653026 654014 653102  Gehl Company 143 Water Street, P.O. Box 179, West Bend, WI 53095-0179 906693/AP993 GEHL Company 1993 Printed in U.S.A.