Transcript
DS-7600NI-E1/4P and DS-7600NI-E2/8P series NVR Introduction:
Physical Interfaces:
DS-7600NI-E1/4P and DS-7600NI-E2/8P series NVR (Network Video Recorder) is a new generation recorder developed by Hikvision independently. Combined with multiple advanced technologies, such as audio and video decoding technology, embedded system technology, storage technology, network
DS-7600NI-E1/4P
technology and intelligent technology. It can both work alone as a recorder and cooperate with other device to form a comprehensive surveillance system. The DS-7600NI-E1/4P and DS-7600NI-E2/8P series NVR are widely applied in the areas of finance, public security, military, communication, transportation, DS-7600NI-E2/8P
education, etc..
Available Models: DS-7604NI-E1/4P; DS-7608NI-E2/8P, DS-7616NI-E2/8P and DS-7632NI-E2/8P.
Index
Name
1
Power Supply
2
Audio In
3
HDMI Interface
4
LAN Network Interface
5
Audio Out
Main Features:
6
VGA Interface
Connectable to the third-party network cameras like like ACTI, Arecont,
7
USB Interface
AXIS, Bosch, Brickcom, Canon, ONVIF, PANASONIC, Pelco, PSIA,
8
Ground
SAMSUNG, SANYO, SONY, Vivotek and ZAVIO.
9
Power Switch
Up to 16 network cameras can be connected.
10
Network Interfaces with PoE Function
Support live view, storage, and playback of the connected camera with up to the resolution of 5 megapixels.
Simultaneous HDMI and VGA outputs at up to 1920×1080 resolution.
New GUI and support starting record with one key;
Holiday recording;
Realize instant playback for assigned channel during multi-channel display mode.
Up to 16-ch synchronous playback at 4CIF resolution.
Customization of tags, searching, and playing back by tags.
Locking and unlocking record files.
Support HDD quota mode; different capacity can be assigned to different channel.
Up to 2 SATA hard disks can be connected.
1 self-adaptive 10M/100M/1000M network interface is provided;
Up to 8 independent PoE network interfaces are provided;
Support Hikvision DDNS (Dynamic Domain Name System);
Support network detection, including network delay, packet loss, etc.
Typical Application:
Specifications: Model
DS-7604NI-E1/4P
DS-7608NI-E2/8P
DS-7616NI-E2/8P
DS-7632NI-E2/8P
8-ch
16-ch
32-ch
50Mbps
100Mbps
200Mbps
Video/Audio
IP video input
4-ch
input
Two-way audio input
1-ch, RCA (2.0 Vp-p, 1kΩ)
Incoming bandwidth
25Mbps
Outgoing bandwidth
80Mbps
Remote connection
128
Recording resolution
5MP/3MP/1080P/UXGA/720P/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Network
Main stream: 50 fps (P) / 60 fps (N) Frame rate Video/Audio
Sub-stream: 50 fps (P) / 60 fps (N)
output
1-ch, resolution: HDMI/VGA output 1920 ×1080P /60Hz, 1600 ×1200 /60Hz, 1280 ×1024 /60Hz, 1280 ×720 /60Hz, 1024 ×768 /60Hz Audio output
1-ch, RCA (Linear, 1kΩ)
Live view / Playback 5MP/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF resolution Decoding 8-ch@720P, Capability
4-ch@1080P
16-ch@4CIF, 12-ch@720P, 6-ch@1080P 6-ch@1080P
1 SATA interface for 1 2 SATA interface for 2 HDDs
SATA HDD
Hard disk Capacity
Up to 4TB for each disk
Network interface
1 RJ-45 10 /100 /1000 Mbps self-adaptive Ethernet interface
External
USB interface
1 ×USB 2.0 and 1 × USB 3.0
interface
Alarm in/out 4/1 (Optional) 4 independent 100 Mbps
8 independent 100 Mbps PoE network interfaces
Interface PoE network interfaces PoE
Max. Power
50W
Supported standard
AF and AT
Power supply
48V DC
220V AC
≤ 10W
≤ 10W
Consumption (without
120W
≤ 10W
hard disk and PoE)
Others
Working temperature
-10 ºC ~ +55 ºC (+14 ºF~ + 131 ºF)
Working humidity
10 % ~ 90 %
Chassis
1U chassis
Dimensions
315 ×230 ×45mm
(W × D × H)
(12.4 ×9.1 ×1.8 inch)
19-inch rack-mounted 1U chassis 445 ×290 ×45mm (17.5 ×11.4 ×1.8 inch)
Weight
≤ 1 Kg (2.2 lb)
(without hard disk)
Note:
Each PoE port supports the AF ad AT standard.
≤ 10W
The total consumption of connected IP cameras cannot exceed the power provided by NVR.
The formula to calculate the cameras to connect via the PoE interface is: C 1 * N1 + C2 * N2 + … + Cn * Nn ≤ T. Cn refers to the power consumption of an IP camera. Nn refers to the number of camera(s) which has the Cn consumption. T refers to the PoE power provided by NVR. Example: The DS-7616NI-E2/8P provides 120W power for the PoE connection, and we assume it has already connected 4 IP cameras through the PoE interfaces with each consumption of 15W. If you want to connect more IP cameras with each consumption of 20W, how many cameras can be connected? In this example, C1 = 15W, N1 = 4, C2 = 20W, and T = 120W. Then 15W * 4 + 20W * N2 ≤ 120W, N2 = 3.
Note: The formula to calculate the incoming bandwidth and the IP camera connected is: A = B/(C+D). A refers to the number of IP camera you connected. B refers to the value of the incoming bandwidth. C refers to the bitrate value of the main stream of the connected IP camera. And D refers to the bitrate value of the sub-stream of the connected IP camera. Example: The incoming bandwidth of DS-7616NI-E2/8P NVR is 100Mbps and the IP camera to connect is with resolution of 1080P (1920*1080) / 25 (30) fps. The bitrate for the main stream and sub-stream of the IP camera is set as 6Mbps and 1Mbps respectively. In this example, B=100Mbps, C=6Mbps, D=1Mbps and A = B/(C+D) = 100 / (6+1) ≈ 14. So the number of IP cameras can be connected with is 14.
