Preview only show first 10 pages with watermark. For full document please download

Similar Pages

   EMBED

Share

Transcript

No.:12060834-120531_IR2500_install guide Drilling Guide Installation and Usage Instructions 1. Battery Installation CLOSE OPEN CLOSE OPEN AA " 1.5V " x 2 1) After unpacking the camera, take apart the holder and pick up the camera 2) Open the battery housing and install 2xAA batteries (not included) 3) Check if the single red LED is flashing, and it means the camera is working. 4) Replace the battery housing and fix tight as before. 2. Camera installation 1) Mark three drilling locations following the camera holder 2) Using the appropriate drill to make the holes and insert the plastic plugs 3) Fixing the holder with screws but remember to leavethem a littler out in order to hold the camera 4) Install the camera tight and adjust the angel of the lens as you need