Transcript
Cabinets
Fumo Fumo Communications Communications
HM-CAB-WMC-9U-560
— 19“ wall mounting cabinet, 9 units, 560mm depth, multiple cable entry points — Shatter-proof, smoked glass door Standards: 19“ mounting acc. to IEC 297-1, overall cabinet dimensions acc. to IEC 297-2 APPLICATION Developed to represent a compact and most cost-effective solution of Fumo’s range of wall mounting cabinets, featuring a modular structure for fast and easy assembling. The rigid welded frame construction is made of steel sheet, incl. non-opening side panels to provide additional stability. Two 19” mounting angles (front) allow a flexible construction and depth-adjustment. The vented top cover provides passive air circulation via convection, and contains two fan outlets for cooling units. The front door features a full-length shatter-proof smoked glass door, incl. a decorative accent trim. It is reinforced by left/right metal frames and integrated locking mechanism. Side doors: removable, lockable (incl. locks). Rear door: mechanically lockable, removable, concurrent use as mounting device. During montage the removed rear door is fixed directly onto the wall to provide the basic built-on construction, at which all other items are easily plug-in assembled. Benefits: direct wall fixation, fast and simple installation, little requirement of manpower, multiple cable access points for maximum versatility, cost-effective.
TECHNICAL DRAWING
Front view Front view
Side view
Top view
SPECIFICATIONS Part definition
Mateial thickness
Material definition & properties
Shipment conf.
UPPER CASE
1,0mm (nominal)
DIN EN 10130 - 99 EREGLI DC-014 6112 CRS
1
BOTTOM CASE
1,0mm (nominal)
DIN EN 10130 - 99 EREGLI DC-014 6112 CRS
1
FRONT DOOR
1,2mm (nominal)
DIN EN 10130 - 99 EREGLI DC-014 6112 CRS
1
19“ MOUNTING ANGLES
1,5mm (nominal)
DIN EN 10130 - 99 EREGLI DC-014 6112 & GALVANIZED COATING
4
REAR DOOR
1,5mm (nominal)
DIN EN 10130 - 99 EREGLI DC-014 6112 CRS
1
SIDE PANELS
1,0mm (nominal)
DIN EN 10130 - 99 EREGLI DC-014 6112 CRS
1
GLASS
4,0mm (nominal)
secure and tempered
1
FEATURES HEIGTH 9U
422mm, inside (nominal)
491mm, outside (nominal)
WIDTH x DEPTH
600mm x 560mm (nominal)
LOAD CARRYING CAPACITY
60kg (nominal)
IP PROTECTION
IP20
SURFACE TREATMENT
Phosphat coating
COLORING
grey RAL 7035 / black RAL 9005
LOCKS
Emka (Germany)
wall mouning cabinet 9U 600x560
PACKAGING • Shrinked plastic with inner surface and outside covered by high density cardboard. • Corners are supported with Styrapor-protection. • Flat packaging available on request. © Fumo2006. All Rights Reserved. – All values in this data sheet are nominal. Rev. 05/2008 The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Fumo. The information is believed correct at the time of issue. Fumo reserves the right to amend this specification without notice. Specification is not contractually valid unless specifically authorized by Fumo.
HEAVYMETAL www.fumocom.com
Fumo Communications (Italia)
