Transcript
BPS 24V Power Converter for ResMed Air 10 & S9 Series Devices ResMed Air 10 and S9 Series devices operate from 24V direct current and the C-100 CPAP Battery operates from 12V direct current; therefore, the use of a 24V power converter is required in order to power these devices.
AIR 10 DEVICE SINGLE BATTERY CONFIGURATION
INTRODUCTION
The 24V power converter includes the 24V converter box and connection cords to fit both ResMed Air 10 and S9 series PAP devices. 24V Converter Box
24V Power Converter
S9 Series Connection Cord
Air 10 Series Connection Cord
The 24V power converter must be connected to the CPAP Battery and the ResMed Air 10 or S9 Series device in the exact order listed below or the voltage conversion process will not initiate. SINGLE BATTERY CONFIGURATION
Locate the connection cord for your PAP device. Each cord has a tag to identify if it is compatible with ResMed Air 10 or S9 series devices.
Insert the appropriate connection cord for your PAP device into the female end of the 24V power converter box.
Insert the 24V power converter box into the female end of the DC power pigtail cord.
Insert the appropriate connection cord for your PAP device into the female end of the 24V power converter box.
Insert the 24V power converter (with appropriate PAP device connection cord attached) into the DC input port of the ResMed Air 10 or S9 device. Turn on the PAP device and it should begin functioning.
S9 DEVICE DUAL BATTERY CONFIGURATION
24V Power Converter DC Out Jacks
Insert the 24V power converter (with appropriate PAP device connection cord attached) into the DC input port of the ResMed Air 10 or S9 device. Turn on the PAP device and it should begin functioning. DC Power Pigtail Cord
BATTERY POWER SOLUTIONS
PAP DC Input Port
Insert the 24V power converter box into the DC out jack of the Battery.
Insert the DC power pigtail cord that is included with the CPAP Battery Kit into the DC out jacks of both Batteries.
DUAL BATTERY CONFIGURATION
CONNECTION INSTRUCTIONS
DC Out Jack
SPECIFICATIONS Input: 12V DC Output: 24V/3.75A (max) Length: 60” (connector to connector) Weight: 4 oz
PAP DC Input Port
