Transcript
J6.1.21
WALL WASH MULTI-SPOTS®
PRODUCT SPECIFICATIONS
Adjustable Wall Wash 20/39/70W T4/T4.5 CMH
Lamp One 20/39/70W T4/T4.5 medium base ceramic metal halide lamp. Socket G8.5 bi-pin base with recessed female contacts • 1A, 750V, rated for 5KV pulse.
MS124-20H, MS124-39H, MS124-70H
Lampholder Construction Extruded aluminum lamp housing with die-cast aluminum end caps and lens holder. Aiming 35˚ vertical aiming capability. Lens Uniformity glass lens included with fixture. Electronic Ballast Premium, high efficiency, constant power electronic ballast provides optimum color and CRI uniformity from fixture to fixture • Offers most consistent lumen output and photometric performance over life of lamp • Controlled starting current and stable normal operation maximizes lamp life • Faster hot restrike and lamp warm-up time compared to magnetic ballast • Automatic resetting thermal protection • MOV transient protection • End-of-life shutdown prevents nuisance cycling and flashing • May be replaced from above or below ceiling • 120/277VAC input voltage. Trim Finish Black (BL) or White (WH) finish. Labels U.L. listed for through-branch wiring and damp location • Product thermally protected against improper use of lamps or insulation • I.B.E.W. Union made • CSA Certified.
Type
Cat. No.
________ _____________________________
________ _____________________________
Project: _________________________________________ Notes: _________________________________________
DIMENSIONS
6 3/4"
Testing All reports are based on published industry procedures; field performance may differ from laboratory performance. Product specifications subject to change without notice.
INSTALLATION Mounting Bracket Mounting brackets have 2.5” vertical adjustment and accept proprietary Tru-Lock bar hangers, 1 1/2” C-channel and flat linear bars (ordered as accessories) or 1/2” EMT, 3/4” and 1 1/2” C-channel (by others) • One-piece TruLock bar hangers have integral T-bar locking screws and alignment notches for locating and locking fixture in the center or 1/4 tile increments.
9 1/2" 12" 6 3/4"
Housing 22 gauge die-formed galvanized steel • Electrical connections can be made from below the ceiling in an internal wireway or from above the ceiling through a wireway access cover • Wireway access cover has (2) 1/2” knockouts with pry-out slot for conduit attachment • 1/2” knockouts with pry-out slots are located on each end of fixture for conduit attachment or continuous row, end-to-end fixture installation. 9 1/2"
Trim Painted trim attaches to housing using 2 torsion springs and an electrical quick-connector • Sturdy extruded aluminum lamp housing with die-cast aluminum end caps and textured painted housing • Lamp may be replaced without removing trim section.
12" DRYWALL CEILING CUTOUT: 11 1/8˝ X 8 3/4˝
ORDERING INFORMATION: Rough-in and accessories ordered separately. Example: MS124-20H-BL Finish
Wattage/Lamp
Rough-In MS124 T4/T4.5 MH Lamp G8.5 base
Example: HB-TL -
20H 20W 120V/277V Electronic 39H 39W 120/277V Electronic 70H 70W 120/277V Electronic
Options
Accessories
WH White BL Black
†347 347 Volt ***F Fuse and Fuse Holder (Where *** = voltage) †CP Chicago Plenum
HB-TL HB-52 HB-28 LB-27 HB-4 TMR60BL
25” Tru-Lock Grid Ceiling Bar Hangers, Pair 52” C-Channel Bar Hangers, Pair 28” C-Channel Bar Hangers, Pair 27” Linear Bar Hangers, Pair Conversion Kit for Wooden Joists Black Vertical Louver
† Consult Factory for Availability
1/10
1300 South Wolf Road • Des Plaines, Illinois 60018 PHONE 800-367-5866 • FAX 888-708-6578 www.junolightinggroup.com
J6.1.21
WALL WASH MULTI-SPOTS®
PHOTOMETRIC REPORT
Adjustable Wall Wash 20/39/70W T4/T4.5 CMH
Test Report #: PT05070301 Catalog No: MS124-39H Luminaire Spacing Criterion Parallel to Wall: 0.74 Luminaire: T4 Rectangular Flood/Wall Washer Lamp: One CDM39/T4/830 lamp rated @ 3400 lumens
MS124-20H, MS124-39H, MS124-70H
ENGINEERING DATA ANSI # Input Voltage Input Current Input Power Power Factor
20W M156 120V 277V 0.21A 0.10A 24W >0.90
39W M-130 120V 277V 0.37A 0.17A 44W >0.90
70W M-98/M-139/M-143 120V 277V 0.67A 0.29A 79W >0.90
Lamp Current Crest Factor <1.2 Typ. <1.2 Typ. <1.2 Typ. Ballast Factor 1.0 Typ. 1.0 Typ. 1.0 Typ. T.H.D. <15% <15% <15% Max. Recommended Ambient Operating Temperature 40˚ C 40˚ C 40˚ C EMI FCC Part 18 Class A FCC Part 18 Class A FCC Part 18 Class A Sound Rating A A A
3’ FROM WALL
Single Fixture Performance
Distance
3’ FROM WALL
from ceiling
One 39W T4 Lamp at 3,400 Total Lumens 3’
50°
1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’
Multiple Fixture Performance
0 1’ 2’ 3’ 4’ 5’ 4’ 5’ 6’
123 70 22 5 136 87 28 7 89 63 28 9 53 41 23 9 33 28 18 9 21 19 13 8 14 13 10 6 10 9 7 5 7 7 6 4
2 2 3 4 4 4 3 3 3
1 1 1 1 2 2 2 2 2
127 46 127 125 19 125 124 10 124 141 56 141 138 26 138 137 13 137 96 57 96 92 30 92 91 18 91 61 48 61 56 29 56 54 17 54 40 38 40 36 27 36 34 17 34 29 29 29 25 22 25 23 16 23 22 22 22 18 17 18 16 13 16 16 17 16 13 13 13 12 10 12 13 13 13 10 11 10 9 8 9
4’ FROM WALL
Single Fixture Performance
Distance
4’ FROM WALL
from ceiling
50° One 39W T4 Lamp at 3,400 Total Lumens 4’
1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’
Multiple Fixture Performance
0 1’ 2’ 3’ 4’ 5’ 4’ 5’ 6’ 55 38 20 7 3 85 62 28 9 3 69 54 31 12 4 50 40 26 12 5 34 28 21 11 5 23 21 16 10 5 16 15 12 8 5 12 11 9 7 4 9 8 7 6 4
1 2 2 2 3 3 3 3 2
61 42 61 58 26 58 57 14 57 92 58 92 89 35 89 87 19 87 79 63 79 73 41 73 71 24 71 61 55 61 55 38 55 52 24 52 45 44 45 40 33 40 37 22 37 34 35 34 29 27 29 26 20 26 27 27 27 22 22 22 19 17 19 22 22 22 17 18 17 15 14 15 17 18 17 14 14 14 12 12 12
*Multipliers: 20W = 0.47 70W = 1.82 *Note: Mulitipliers are provided for estimating purposes only. Use IES photometric files for precise photometric information.
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (800) 367-5866 • Fax (888) 708-6578 Visit us at www.junolightinggroup.com Printed in U.S.A. ©2016 Acuity Brands Lighting, Inc.
