Transcript
Introduction Through the video splitter DC-41110 / DC-42110 / DC-43110 / DC-43115, you can use one PC to display identical image on 2,4,8,16 monitors or even more.
VIDEO SPLITTER
(DC-41110) 1 In 2 Out
(DC-42110) 1 In 4 Out
Video splitter is ideal for: Test bench facilities Data Center Help desk Video broadcasting: Presentation Stock quotes Timetables Educational facilities
Technical Specifications Input/Output Signal Pin # 1 2 3 4 5 6 7 8
Signal Red video Green video Blue video ID2 Ground Analog Ground Analog Ground Analog Ground
Pin # 9 10 11 12 13 14 15
Signal NC Ground ID0 ID1 Horizontal Sync Vertical Sync ID3
FRONT VIEW
Features (DC-43110) 1 In 8 Out
With 400 MHz pixel frequency. Extends the video signal up to 65 meter (213 feet). Supports the DDC, DDC2, DDC2B. (For video out port 1) Can be cascaded. 1U rack design for VS-8116PF. The output is compatible with standard VGA card.
REAR VIEW
Specifications Function
(DC-43115) 1 In 16 Out
User Manual (DC-41110 / DC-42110 / DC-43110 / DC-43115)
Package Contents1 DC-41110 / DC-42110 / DC-43110 or DC-43115 Video Splitter 1 user manual 1 power adapter DC 12V 600mA for DC-41110 / DC-42110 / DC-43110 or 1 DC 12V 1.25A for DC-43115 2 rack rails, 8 screws for DC-43115 only Any thing missed, please contact with your vendor.
Video Input Connector (HD-15 Female) Video Output Connector (HD-15 Female) Max. Resolution Pixel Frequency Cable Distance (Device to Monitor) Signal Type Power Adapter (Min.) Housing Weight Dimensions (LxWxH)
1. Power LED
DC-41110
DC-42110
DC-43110
DC-43115
1
1
1
1
2
4
8
16
2048 x 1536 60 Hz 400 MHz 65 m (213 feet) Max. VGA, SVGA, XGA, QXGA, UXGA, Multisync DC 12V DC 12V 600mA 1.25A Metal 420 g 455 g 680 g 1480 g 200x75 343x105 130x75x42 mm x42 mm x42 mm
1. Input Power Jack 2. “Video In” Port 3. “Video Out” Port *There are 2/4/8/16 out ports for DC-41110 / DC-42110/ DC-43110 / DC-43115.
-2-1-
Installation 1. Turn off the PC and monitors. 2. Connect the HD-15 video extension cable between the PC and the “video in” port of splitter. 3. Connect the HD-15 video extension cables between the monitors and the “video out” ports of splitter. 4. Connect the power cord and turn on the splitter. 5. Turn on the PC and monitors. Note: If you install the DDC monitor for the splitter, the rest of monitors must be the same resolution as the DDC monitor. Available monitors include the VGA, SVGA, XGA, QXGA, UXGA, Multisync, and exclude the CGA, EGA, Mono.
P.S.: The example cascades the 4 and 8 ports splitters; however, you can cascade the video splitter with demanded port.
Operation for cascade: 1. The function to display identical image on more monitors, you request to attach another splitter. 2. Connect the HD-15 male/male video extension cable between the “video out” port of the former splitter and the “video in” port of the latter splitter. Note: Even though you are allowed to cascade the splitter with varied ports, the image might become unstable if cascade too many tiers of splitters.
Trademarks: All the companies, brand names, and product names referred to this manual are the trademarks or registered trademarks belonging to their respective companies.
-3-
-4-
