Transcript
TROUBLESHOOTING
CONTENTS
PROBLEM 1 x minicamcorder
1 x charger
1 x mini-USB cable
1 x rotatable holder
4 x extra O-rings
1 x bike mount
1 x ring holder
1 x audio end-cap
SURFACE MOUNTS
3 x flat mount
1 x curved 1 x screw mount mount
1 x lanyard
SAFETY PRECAUTIONS • Do not point the camera directly at the sun as this may damage the camera. • Product is waterproof only when using waterproof endcap, properly sealed with O-ring. Do not submerge more than 32ft / 10m deep. • Do not use in temperatures colder than 14°F / –10°C or warmer than 104°F / 40°C • It is recommended to turn off the camera while charging.
Camera fails to start
SOLUTION • The camera battery is not charged. Charge the camera. • The camera has encountered an error. Press the Reset button.
WATERPROOF HIGH DEFINITION 1080p MINI-CAMCORDER Quick Start Guide
English Version 1.0
• The camera battery is Camera shuts discharged. Charge the off immediately camera. after starting • microSD card has not been inserted. A microSD card (not included) is required for recording. • The microSD card is full. Remove the files saved on the microSD card or insert a fresh microSD card. NOTE: On a Mac, you must empty the Trash to delete video files from the camera. Device is not recognized by computer
• Mini-USB cable is broken. Replace the cable. • USB port is broken. Try a different USB port.
CAMERA OVERVIEW End-cap
Power/Record button
Microphone
BACK microSD slot
(end-cap removed)
FRONT Laser pointer
Reset button Camera lens
Frames per second
FOR SUPPORT AND INFORMATION, VISIT WWW.LOREXTECHNOLOGY.COM Copyright © 2013 Lorex Technologies Inc. As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE All trademarks belong to their respective owners. No claim is made to the exclusive right to use the trademarkslisted, other than the trademarks owned by Lorex Technology Inc.
LSC015
GETTING STARTED 1. Unscrew the end-cap. 2. Connect the mini-USB cable to the camera. Connect the other end to your computer.
Camera mini-USB Port
Computer USB Port
3. Charge the camera for 3 hours to charge fully. You can also charge the battery by attaching the miniUSB cable to the charger, which is then plugged into a power outlet. 4. Disconnect the USB cable from the camera and insert a microSD card (not included). Push the microSD card down until it clicks into place. The camera can support microSD cards up to a maximum size of 32GB. microSD card
SYSTEM REQUIREMENTS • PC: Windows 7 / XP / Vista • Mac: OS 10.7 or higher NOTE: A minimum of 10GB free hard drive space is required to save recordings
ACCESSING & SAVING VIDEOS ON YOUR COMPUTER 1. Connect the mini-USB cable to the camera and connect the other end to your computer. The computer will recognize the camera and automatically install drivers. 2. Windows: An Autorun window appears. Click Open folder to view files. If Autorun does not appear, open Computer and double-click Removable Disk.
microSD slot
5. Ensure there are 2 O-rings underneath the thread at the back of the camera.
Click Open folder to view files
Thread O-rings
MOUNTING OPTIONS Use the included accessories to mount the camera. See the examples below: Bike Mount Slide the rotatable holder / ring holder into the bike mount.
+ Curved Mount Slide the rotatable holder / ring holder into the curved mount. Peel off adhesive guard to attach to a curved surface.
+ Screw Mount Slide the rotatable holder / ring holder into the screw mount. You can use the screw mount with a tripod or other mounting equipment that uses 1/4” thread.
+
Autorun window 6. Attach an end-cap. If the camera might get wet during use, attach the waterproof end-cap. If the camera will stay dry, you can use the audio end-cap to capture more sound while recording.
OR Mac: Double-click the removable disk folder on the Desktop. Removable disk folder
Audio End-cap (holes, not waterproof)
Waterproof End-cap (no holes, waterproof)
7. Press and hold the Power/Record button for 1 second to turn on the camera. The camera begins recording immediately. The blue LED flashes to indicate recording is active.
Power/Record button
8. To stop recording and power off, press and hold the Power/Record button for 5 seconds.
Flat Mount Slide the rotatable holder / ring holder into the flat mount. Peel off adhesive guard to attach to a flat surface.
+
3. Double-click the DCIM folder then the 100VIDEO folder to access your videos. 4. Your videos are saved in .mov format. Doubleclick videos to open. Copy videos to a folder on your computer to save them to your hard drive. NOTE: You may need to install Quicktime Player to watch videos. Quicktime Player is a free download from www.apple.com
TIP: The Power/Record button should always be facing up when the camera is mounted so you can easily start and stop recording.
LSC015
