Transcript
PRO SLIMLINE SERIES
DLS Svenska AB - Sweden
DLS PS5 PRODUCT SPECIFICATIONS 2-WAY CAR SYSTEM MODEL PS5 5 1/4” BASS MIDRANGE 25 MM SOFT DOME TWEETER NEODYMIUM MAGNET SYSTEM 5 1/4”, 13 cm mid bass element:
Specifications valid from -2002-04.
Dimensions: Outer diameter Magnet diameter Mounting depth Mounting hole Nominal power handling Maximum power Nominal impedance, Z Sensitivity, 1 W / 1m Frequency response Fs, resonant frequency Voice coil diameter Voice coil height Voice coil type / former Voice coil wire Number of layers
DC resistance Voice coil inductance, 1 kHz Magnet system BL product, BXL Suspension compliance, CMS Mechanical Q factor, QMS Electrical Q factor, QES Total Q factor, QTS Mechanical resistance, RMS Moving mass, MMS Equivalent Cas Air load, VAS Cone / Dome material Cone suspension SD - Effective piston area
4,15 ohm 0,24 mH Strontium 3,76 550 3.20 0,97 0,75 1,31 6,06 gr. 5,78 liters / 0,2 ft3 Polypropylene Foam 86,5 cm2
Voice coil diameter Voice coil height Voice coil wire Magnet system Magnet size Dome material
20 mm / 0,79” 2 mm / 0,079” Copper Neodymium 28 mm / 1,1” Silk
130 mm / 5,12” 90 mm / 3,54” 45 mm / 1,77” 117 mm / 4,6” 50 W 80 W 4 ohms 88 dB 55-5000 Hz 87,2 Hz 31 mm / 1,22” 8,5 mm / 0,33” Kapton Copper 2
25 mm (1”) tweeter element T25: Dimensions: Overall size* For recessed mounting: Mounting depth Mounting hole Nominal power handling Maximum power Nominal impedance, Z Sensitivity, 1 W / 1m Frequency response Fs, resonant frequency
43 mm / 1,69” 18 mm / 0,71” 46 mm / 1,81” 50 W 80 W 4 ohms 93 dB 1,5 - 20 kHz 1500 Hz
Filter box drawing: Art.no: 9-49032B Signal input
Mid-bass
+ + + -
1,0 Ω
15 µF
0,40 mH 123456 123456 123456
123456 0,25 mH 123456 123456 2Ω
3,9 µF 2Ω
Tweeter Tweeter level select
4,7 Ω
* size with mounting cup for recessed mounting
