Transcript
(5)After the headset is successfully paired with your mobile phone. In some case, you will still have to connect the headset with your mobile phone. (Please refer to the mobile phone manual.) (Please refer to Fig.7.) Note: (1)If the headset is not in pairing mode, your mobile phone can not find the headset. Please set the headset into pairing mode before you start to pair the headset with your phone. (2)If no pairing is possible over a period of time (Aprox. 1 minute), the pairing process will be stopped. You have to repeat STEP 4 to successfully complete the pairing.
2.1. If your package has a USB charger included: Plug the charge lead of USB charger into the charging port of your Bluetooth headset. And then, plug the other end of the USB charger into the PC/Mac's USB port. When charging is complete (Red indicator turns off), remove the USB charger and remove the charge lead from your headset. (Please refer to Fig.4.1, Fig 4.2) 2.2. If your package has a car charger included: Plug the car charger into the cigarette lighter socket. And then, plug the charge lead into the charging port on the Bluetooth headset. When charging is complete (Red indicator turns off), remove the car charger and remove the charge lead from the Bluetooth headset. (Please refer to Fig.4.1, Fig 4.3) 2.3. If your package has a travel charger included: Plug the travel charger into a 100~240V wall socket. And then, plug the charge lead into the charging port on the Bluetooth headset for charging. When charging is complete (Red indicator turns off), remove the travel charger and remove the charge lead from the Bluetooth headset. (Please refer to Fig.4.1, Fig 4.4)
Fig.4.1
Fig.4.2
Fig.4.3
3.Turning the headset on or off: (1)Press the “Button 1” for nearly 3 seconds. You will hear two beep sounds and the blue indicator will begin to flash. The headset is now powered on. (Please refer to Fig.5 )
Fig.4.4
5.Answering or ending calls: When the headset is paired with your phone, and when there is an incoming call, you will hear a musical ring. Then press the “Button 1” to answer the call. When there is a call in session, you can press the “ Button 1 ” to end the call. Note: Because of the different design of some mobile hones, a disconnection may automatically happen even when the headset is powered on. In this case,the headset will not ring if there is an incoming call. Press “Button 1” for 1 second to re-connect the headset with the mobile phone for an incoming call. (Please refer to Fig.8.) 6.Making calls: (1) Voice-dialing: Press the “Button 1”. After hearing a beep sound, say the name of the person you recorded on your phone. (The availability of this function depends on the design of the mobile phone you use. Please refer to the manual of your mobile phone for the voice-dialing function. )
(2)When the power is on, press the “Button 1” for 5 seconds. You will hear two beep sounds and the red indicator will flash. Now the headset is turned off. (Please refer to Fig.6.) 1. (Please refer to Fig.1, Fig.2, Fig.3)
(2)Dial the phone number on you mobile phone as you normally do. The sound will be transmitted to the headset automatically.
Fig.5 Fig.1
Fig.2
Fig.3
2.Charging the battery: Your headset has a built-in Lithium-Ion battery which must be fully charged before you use the headset first time. For the charging first time, you need to charge it for 3 hours. During the charging, the indicator shows a steady red light. When the battery is fully charged, the red light will turn off. For later on charging, it will take 60 inutes to fully charge the battery or you found the red light has turned off. You can charge the headset either by using the AC charger (travel charger), the USB charger (USB charging cable) or the car charger depending upon the package accessories available. Please check your package for details.
Fig.6
4.Pairing the headset: (1)The headset must be powered off before you begin to initiate the pairing. Press the “Button 1” till the blue and red indicators begin to flash alternatively. The headset is now in pairing mode. (2)Initiate the pairing process of your bluetooth mobile phone. (Please refer to the manual of your mobile phone.) (3)When asked the PIN code, please enter “0000” to successfully complete the pairing process. (4)When the pairing process is successfully completed, the blue indicator will flash. The headset is now in standby mode.
7.Changing the volume of the Headset: (1) Press the “Button 2” to increase the listening volume of the headset. (2) Press the “Button 3 ” to decrease the listening volume of the headset. (3) You can also adjust the volume from your mobile phone. Please refer to the manual of your mobile phone. 8.Redialing the call: After ending the call, you can double press the “Button 1” to redial the call you just ended.(The availability of this function depends on the design of the mobile phone you use. Please refer to the manual of your mobile phone.) 9.Mute function: You may have to keep a call on line while talking to others. Push the “Button 2” and the “Button 3” at the same time for one second. You will hear continuous beep sounds. Now the headset is in “Mute function” mode. To disable the “Mute function”, press the “Button 2 ” and the “Button 3” at the same time once again.
10.Rejecting a call When there is a call in session, you can press the “Button 1” for three seconds to reject a call.
Fig.7
Fig.8
Trouble-Shooting: 1.The red indicator flashes: It indicates that headset is in low-battery. Charge the battery until the red indicator is turned off. 2.If no connection between the headset and your phone: Make sure that the bluetooth headset fully charged. Repeat the step 3 to complete the pairing process. Make sure that the headset is within 10 meters of your phone and that there are no obstructions such as walls or other electronic device between the headset and your phone. If the steps above do not solve the problem, please refer to the manual of your mobile phone for more information. Note: This headset is complied with Bluetooth Specification 1.2. However, the interoperability of this headset and other devices is not guaranteed because of the compatibility. Product Care: (1) Avoid humidity, liquid or moisture as this device is not water-proof. (2) Avoid high and low temperature, especially in a car. (3) Please do not dissemble the headset. (4) Please do not use chemical, cleaning solvent or strong detergent to clean the headset. And avoid sharp object. (5) Please do not change or modify the headset. Any change or modification will void the warranty of the product. (6) Do not dispose the headset into a fire. This may result in an explosion. (7) Use only the attached charger when you charge the headset. Safety instructions: (1) Check local laws about the use of mobile phone and headset while driving. For your own safety, please focus on the road while using the headset. (2) Please turn off the headset according to the sign of the specified areas that requires an electric device to be switch off. These areas include the hospital, aircraft, and blasting area or potentially explosive atmosphere. (3) Do not store the headset in the air-bag deployment area. This may result in an injury when the air-bag deploys. (4) Do not dissemble the charger. It may expose you to the danger of electric shock. Caution and Warranty: Read the following information before using this device. Users are not permitted to change or modify this device. Any unapproved change or modification by the user on this device will void the user’s authority to use this device. The manufacturer and dealer of this device are not responsible for any accident caused by the improper use or dissemble of this device.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.
