Transcript
MEASUREMENT INSTRUMENTS
ALP77
“2 Lines, 4 Digits Programmable Projection”
4 ms Sampling Time 2 pcs Relay Outputs (Double Contact) Adjustable Output Times Automatic Calibration Hysteresis TARE Function (ABS/REL Reset) Offset Value Password Protection
ALP 77-P series, 4 digits programmable measuring of displacement and angle by means of linear or rotary potentiometers. ALP 77- V series, measures instruments for 0-10 VDC voltage inputs. ALP 77-A series, measures instruments for 0/4-20 mA current inputs. Mechanical Dimensions
Technical Specifications 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz
Power Supply
48 mm
48 mm
Power Consumption
5,5 VA /4,4 W Maximum
Sensor Power Supply
5 VDC 100 mA (Potentiometer) 24 VDC 100 mA (Pressure, Distance sensors)
Wiring
2,5 mm2 Socket Terminal
Inputs
Potentiometer Input (ALP 77-P) 0-10V Voltage Input (ALP 77-V) 0 / 4-20 mA Current Input (ALP 77-A)
Outputs (Relays)
2 pcs 250 VAC 3A (For resistive load) Relay
Dimensions
72 x 72 x 96 mm
Weight
300 grams Up to 31 °C %80, above 31 °C linear decreasing and at 40°C %50
Relative Humidity
-10 to 60 °C
Storage Temperature
0 to 50 °C
Operating Temperature Protection Class
IP60 Front Panel, IP20 Rear Panel
Connection
OUT 1 OUT 2
ALP77-P
RS-232
TX RX GND
+ in -
COM NO NC COM NO NC
+ -
L N
These outputs are optional. + -
Power Supply 24 VAC / DC or 85 / 265 VAC
+24 V Sensor Supply 0-10V Input 0V (GND) ALP77-V
+24 V Sensor Supply 4-20mA Input 0V (GND) ALP77-A
Atek Sensor Technology A.S. Tuzla Kimya Sanayicileri Org. San. Bolg. Melek Aras Bulvari, No:67 34956 Tuzla-Istanbul / TURKEY Tel: +90 216 399 44 04 Fax: +90 216 399 44 02 www.ateksensor.com
[email protected]
