Transcript
Tool Schematic and Parts — Cordless Framing Nailer Part No. 902200
Model CF-325
IMPORTANT DO NOT DESTROY Printed in U.S.A.
It is the customer ’s responsibility to have all operators and service personnel read and understand this manual.
©2010 Illinois Tool Works, Inc.
PARTS LEGEND 1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 30 31 32 33 34 35 36 37 38 39 40 41 42 44 45 46 47 48 49 50 51 **
Paslode CORDLESS FRAMING NAILER, 902200
902207 1 Grill 900315 1 Filter 900469 1 Fan Motor Assembly (Includes PC board, washer, flat retaining ring, motor mount, and retaining ring (curved) 900300 1 Retaining Ring (flat) 900470 1 Motor Mount 401355 1 Retaining Ring (curved) 901063 4 Shoulder Screw 10-24 x 1-1/2 904517 1 Fuel Barb 401356 1 Motor Sleeve 900286 1 Spark Plug Assembly, includes O-Ring 902215 1 Fuel Tube 404453 1 Bracket, Cylinder Head 902210 1 Fuel Dosing Lever 902209 1 Fuel Door 902230 1 Pin, Fuel Door 902235 1 Retaining Ring,Fuel Door 902221 1 Cylinder Head 900935 2 Seal Ring 403167 1 Fan Blade Assembly 900474 1 Spark Unit Assembly 900475 1 Molded Circuit Assembly 900478 1 Spark Plug Assembly Wire 900231 1 Clip, Wire Spark Plug 403987 2 Screw Thread Forming 6-32 x 1/4 902226 1 Handle Assembly Kit - Right & Left 404448 1 Roller Lever Assembly 404702 2 Screw Thread Forming 6 x 3/8 404436 1 Nail Channel 404441 1 Cover Plate Magazine 901222 2 Shoulder Screw 10-32 x 1/2 902206 1 Cap 404412 1 Wear Plate, Chamber Lock 900453 4 Screw Plastite 8-16 x 7/8 900508 1 Warning Label 902220 1 Magazine Channel 900594 4 S.H.C.S. Sems 8 - 32 x 1/2 901241 1 Stop, Cage 404451 1 Lockout Bar, Follower 902219 1 Shear Block 901238 1 Spring, Flat 404435 1 Trigger 900269 1 Chamber Lock Bar 404927 1 Spring, Trigger 401328 1 Retainer ring 401461 2 Piston Ring 404485 1 Piston Assembly,includes rings 902233 1 Combustion Chamber Assembly 404827 2 Pin Make sure Warning Labels (#900497,900508) are properly affixed. Replace if necessary. Label is available at no charge through the Service Department. Apply Loctite 242 (Blue) Part No. 093500. Apply Loctite RC-620 (Green) Part No. 401491 Denotes new change.
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 85 86 87 88 89 **90 91 92 93 94 95 96 97 98 99 100 101 102
404419 902239 900934 901204 404464 404424 404422 404423 902227 900596 403816 404445 902223 901249 902225 900592 401380 902211 902203 902237 902234 902240 900593 403985 901415 901202 403986 902204 902205 404457 404922 401450 901240 404426 404425 900969 900481 900497 902222 404407 900595 902212 902236 900427 900468 404411 900546 900597 902238 902213
1 1 2 1 2 1 1 1 1 6 2 2 1 1 1 2 1 1 1 1 2 1 3 1 1 1 1 1 1 1 2 3 1 1 1 4 1 1 1 1 2 1 1 1 1 2 1 1 1 1
Bumper Spring Steel Ring, Sleeve Sleeve Assembly, includes rings Rubber Stop Reed Valve Muffler Muffler Cover Utility Hook Button Screw Thread Forming Sems 8-32 x 7/16 Socket Head Capscrew 10-24 x 1-1/8 Bushing, Shear Block Wear Plate, Nose Upper Probe Lower Probe S.H.C.S. Sems 10-32 x 1/2 Tie Bar Fuel Pivot Arm Housing Assembly Utility Hook Label Retainer Ring, Sleeve S.H.C.S. Sems 10-24 x 5/8 Follower Follower Bushing Spring Assembly Retaining Ring Spring Pin Follower Guide Follower Button Spring Pad, Battery Contact Foam Pad Probe Release Exhaust Baffle Reed Plate Torx Screw 8-32 x 5/8 O-Ring Warning Label Combustion Chamber Ring Combustion Chamber Torx Screw Sems 8-32 x 3/8 Fuel Block Nameplate Light Pipe Washer, Motor Shaft Spring Brass Insert Screw Thread Forming Sems 6-19 x 3/8 Utility Hook Spring Pin Fuel Arm Pivot
SAFETY INSTRUCTIONS WEAR EYE AND HEARING PROTECTION Always wear hearing protection and eye protection devices, including side shields when operating or working in the vicinity of a tool.
WARNING All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool's operation and present a safety hazard.
47
8 55 60
Model CF-325 #902200
Note: Ring openings to be
48
} 180° apart
49 1 2 33
52 21
3* *See Note 3
46
54
4 97
6
7*
11
87 93 57 59 58
94
12 9
24
98
86
16 18
69
22
14
16
29
30 35
30 35
101
102
19
45
15
17
64
61
18
20
100
63
62
32
55 60
8 10 45 50
50
71
60
27
88
29
56
*See Note 10
10*
61
6 8
44
98
13
20 25
55
56 *See Note 7
130 140
6 8
95
30 35
36
RTV under spark unit
65 90
91
37
85
68
89
23
25 83
66 34 92
82
35 40
67 39 42 45 60
70
38
32 96 26
99
72
30
51 31
77
*Note 3 - Orient circuit board with connector toward arrow on cylinder head.
83
75
35
41 *Note 7 - Concave surface of the snap ring to seat against the motor mount. *Note 10 - Sleeve positioned with ribs contacting motor shell.
73 76 74
55 60
79
78
53
40 81 TORQUE VALUES Min Max
IN/LBS.
35
38 35 40
18 20
80
ACCESSORIES
Car Adapter
Enables you to re-charge your battery with your vehicle's electrical system.
Part No. 900507
Battery Cell
Part No. 404717
Paslode Cordless Lubricating Oil
Part No. 401482
5/32" Hex Key
For clearing jams and servicing.
Part No. 401331
No-Mar Work Contacting Element
Rubber tipped WCE to eliminate marring work surface. (Replacement rubber tip, Part No. 403369)
Part No. 901252
Paslode Cordless Nailer Case Part No. 404710
Clear Safety Glasses
Part No. 401382
Cordless Tool Cleaner
Ideal cleaner for all Paslode® tools.
Part No. 219348
Battery Charger Kit (Replacement Charger Base Only Part No. 901230) (Replacement Transformer Only Part No. 900477- US/CANADA)
Part No. 900200
(Replacement Transformer Only Part No. 900505 Continental Europe) (Replacement Transformer Only Part No. 900506 U.K.) (Replacement Transformer Only Part No. 900504 Australia)
Printed in U.S.A © 2010 Illinois Tool Works, Inc.
P
An Illinois Tool Works Company 888 Forest Edge Drive Vernon Hills, Illinois 60061
902247-8 02/10
