Transcript
CLASSIC SERIES
DLS Svenska AB - Sweden
DLS B6 PRODUCT SPECIFICATIONS 2-WAY CAR SYSTEM MODEL B6 6 1/2” BASS MIDRANGE 16 MM TWEETER WITH NEODYMIUM MAGNET SYSTEM 6 1/2”, 16,5 cm mid bass element:
Specifications valid from -2004.
Dimensions: Outer diameter Magnet diameter Mounting depth Mounting hole Nominal power handling Maximum power Nominal impedance, Z Sensitivity, 1 W / 1m Frequency response Fs, resonant frequency Voice coil diameter Voice coil height Voice coil type / former Voice coil wire Number of layers
DC resistance Voice coil inductance, 1 kHz Magnet system BL product, BXL Suspension compliance, CMS Mechanical Q factor, QMS Electrical Q factor, QES Total Q factor, QTS Mechanical resistance, RMS Moving mass, MMS Equivalent Cas Air load, VAS Cone / Dome material Cone suspension SD - Effective piston area
3,7 ohm 0,63 mH Ferrite 4,41 532 3,67 0,85 0,69 1,21 10,69 gr. 11,55 liters/0,40 ft3 Polypropylene Foam 122,00 cm2
Voice coil diameter Voice coil height Voice coil wire Magnet system Magnet size Dome material * with mounting cup
16 mm / 0,79” 2 mm / 0,079” Copper Neodymium 20 mm / 0,79” Mylar
165 mm / 6,5” 80 mm / 3,15” 63 mm / 2,44” 146 mm / 5,5” 50 W 80 W 4 ohms 88 dB 50-5000 Hz 66,7 Hz 26 mm / 1,02” 12 mm / 0,47” Aluminium Copper 2
16 mm (0,63”) tweeter element T16: Dimensions: Overall size For recessed mounting: Mounting depth* Mounting hole* Nominal power handling Maximum power Nominal impedance, Z Sensitivity, 1 W / 1m Frequency response Fs, resonant frequency
38 mm / 1,5” 20 mm / 0,8” 43 mm / 1,7” 50 W 80 W 4 ohms 91 dB 2 - 20 kHz 1800 Hz
Filter drawing: Art.no: 9-49007 (highpass tweeter filter) Art.no: 9-49008 (lowpass filter) +
15 µF
0,25 mH 123456 123456
+
Tweeter
+ -
12345 12345 12345 0,1 mH
Tweeter level select
15 Ω 1,5 Ω
+ 4,7 µF
Signal input
Mid-bass
