Transcript
HDE 210 Digital Encoder Features • 2 x MPEG2 encoder (ISO/IEC 13818-1)
– – – – – – – – – –
Input optionally CVBS (Composite) or S-Video Standard PAL BG 4.43 MHz oder PAL N 3.58 MHz Aspect ratio 4:3 or 16:9 adjustable Sharpness adjustable Teletext Service ID adjustable Programme name adjustable Bit rate 2…15 Mbps adjustable Audio bitrate 192…384 kbps adjustable Audio level adjustable
• ASI input/output
– ASI data rate adjustable – Multiplexing: Cassette can be cascaded
• LAN output
– SPTS/MPTS transport stream acc. to UDP or RTP protocol
• Signal output via ASI or LAN Transport stream and ORGNET-ID adjustable Multiplexing: ASI input with encoder signal Station filter: Programmes can be removed (Programme data stream incl. modification/creation of the tables) Switch on and off the Network Information Table
• Remote Control (via PSW 1000*) • Remote Update (via BEflash*)
(* and a corresponding management unit)
PSW 1000 Features • Comfortable user interface • LCN for the complete station • NIT for the complete station (several head-end stations) • Save/export the configuration
GSS Grundig SAT Systems GmbH, Beuthener Straße 43, D-90471 Nuremberg Phone: +49 (0) 911 / 703 8877, Fax: +49 (0) 911 / 703 9210,
[email protected], http://www.gss.de Alterations reserved. Technical data E. & O.E.
CONTROL REMOTE
– – – – –
UPDATE KLASSE
REMOTE
• Transport Stream Processing:
CLASS
Block diagram: ASI-Eingang ASI input BNC
Video-Eingang Video input Cinch
R L FBAS CVBS C Y
ENCODER
S-Video-Eingang S-Video input Mini-DIN
AV 1
Audio-Eingang Audio input Cinch Video-Eingang Video input Cinch
S-Video-Eingang S-Video input Mini-DIN
AV 2
Cascading:
µP / TPS-MODUL
Audio-Eingang Audio input Cinch
ASI-Ausgang ASI output BNC
Netzwerk Network “RJ45”
R L FBAS CVBS C Y
RS232 D-SUB-9pol
Technical data: The devices meet the EU directives 2006/95/EC and 2004/108/EC. The product fulfils the guidelines and standards for CE labelling. Unless otherwise noted all values are specified as "typical". CVBS Video Input: Standard:........................................................................................................... DIN EN 50049-1 Input level:......................................................................................................................... 1 Vpp Input impedance:..................................................................................................................75 Ω Frequency range:................................................................................................. 20 Hz … 5 MHz S-Video (Y/C) Input: Standard:........................................................................................................... DIN EN 50049-1 Input level: Y (Luminance)................................................................................................................... 1 Vpp C (Chrominance).............................................................................................................. 1 Vpp Input impedance:..................................................................................................................75 Ω Frequency range:................................................................................................. 20 Hz … 5 MHz Audio Input: Standard:........................................................................................................... DIN EN 50049-1 Input level:.................................................................................................................. 500 mVrms Input impedance:................................................................................................................ 10 kΩ Frequency range:................................................................................................ 20 Hz … 15 kHz Encoder: Transport stream:..................................................................................MPEG2 (ISO/IEC 13818-1) Output data rate:........................................................................................... 2 Mbit/s…15 Mbit/s Video data stream:................................................................................MPEG2 (ISO/IEC 13818-2) Audio data stream:...............................................................................MPEG1 (ISO/IEC 11172-3) Audio data rate:............................................................................................ 192 kb/s…384 kb/s ASI Interfaces Standard:........................................................................................................... DIN EN 50083-9 Format:.................................................................................................... MPEG ISO IEC 13818-1 User data rate:.................................................................................................... 2 … 180 Mbit/s Impedance:..........................................................................................................................75 Ω Level (input / output):......................................................................................... 800 mVpp ± 10% Rise/Fall Time:................................................................................................... < 1.2 ns (20-80%) Reflexion loss (input):.................................................................................> 17 dB (5 … 270 MHz) LAN Interface Standard:......................................................................................................10/100/1000 MB/s Transport streams:........................................................... SPTS (Single Programme Transport Stream), MPTS (Multi Programme Transport Stream) Protocols:................................................................................................ UDP (User Data Protocol), RTP (Real-Time Transport Protocol)
Connections: Audio inputs: ........................................................................................................ 4 Cinch sockets Video inputs: ....................................................................................................... 2 Cinch sockets, 2 S-Video sockets (Mini-DIN) LAN:......................................................................................................................1 RJ 45 socket ASI input:....................................................................................................... 1 BNC socket, 75 Ω ASI output:..................................................................................................... 1 BNC socket, 75 Ω Connection strip (10-pin):..........................................................for supply voltages and control circuit RS-232 socket:..............................................................................................serial update interface Remote maintenance Remotely controllable (via PSW 1000*):....................................................................................yes Remote update (via BEflash*):...................................................................................................yes (* and a corresponding management unit)
Assembly instruction
