Similar Pages

Transcript

EFFI-Lase Power Last update : May 21, 2013 Please take a while to consider and read this brochure before using your new device If you have any doubt, please refer to the datasheet Warning          Do not look directly or with any optical instrument the light beam Avoid any contact with the lithographic pattern of the device IP54 Classification: Do not immerse the device in water or any other liquid Use the device in an environment at -10°C à +50°C with no excessive moisture: humidity and high temperature could damage the device Do not use the device in an environment with oil fumes, steam and moisture. Do never try to open the device or fix any damage by yourself. Make sure you are using a correct power supply before connecting the device Do not inverse electrical polarity – check your connections and the conventions before turning on the power supply Either use the connector provided by EFFILUX or make sure you consider an adapted connector to link the device to the power supply L06 Single line pattern 50µm Single line pattern 20µm Single line pattern 10µm 3 lines pattern 500µm pitch 3 lines pattern 200µm pitch 5 lines pattern G03 Cloud of dots - density 50% Cloud of dots 1 - density 17% Cloud of dots 2 - density 17% Grid with rounded points - small Grid with rounded points - large Grid with lines - small L07 100 lines pattern G04 Grid with lines - large L08 20 lines pattern G05 Grid with squares L09 Single line pattern 5µm L02 3D profiling L03 L04 L05 EFFILUX 7, avenue de l’Atlantique 91940 Les Ulis FRANCE C02 C03 Stereovision L01 C04 G01 G02 Tel : +33 9 72 38 17 80 Fax : +33 9 72 11 21 69 Email : [email protected] Alignment Any improper use voids the warranty A01 Cross pattern A02 Concentric circles A03 4 lines arranged in a square EFFI-Lase Power Last update : May 21, 2013 Electronics Optics Mechanics Environment Power supply Illumination mode Connectors Power consumption Wavelength Projection system Projected pattern Maximum dimensions Objective adjustment Fastener Material Working temperature IP code EFFILUX 7, avenue de l’Atlantique 91940 Les Ulis FRANCE 24V DC or constant current Continuous or strobe modes M12 4 pins or M8 3pins 15W Various wavelengths (from UV to IR, white) Any C-mount objective Various designs for alignment, 3D profiling and stereovision 32mm x 105mm (without the objective) A C-mount adaptor on the projector 2 M4 holes and 1 M6 hole on the backside of the device Device body : Aluminum alloy 0°C to 50°C IP54 Tel : +33 9 72 38 17 80 Fax : +33 9 72 11 21 69 Email : [email protected] EFFI-Lase Power Last update : May 21, 2013 Presentation of the device Ø85 Ø30 C-mount adaptor M4x0.7 M8 connector 62.2mm M6x1 85mm 50mm Any C-mount objective can be mounted on the projector. Depending on the working distance (WD) and the C-mount objective selected, different pattern sizes are obtained: Objective f=9mm f=12.5mm f=25mm f=50mm WD = 20mm 55 50 15 n.a. WD = 50mm 100 75 40 n.a. Line length (mm) WD = 100mm WD = 200mm 170 300 130 230 60 120 15 45 Dimensions of a 50µm line pattern Objective f=25mm f=50mm Pattern dimensions H x W (mm) WD = 200mm WD = 500mm WD = 1000mm 100 x 76 250 x 188 500 x 380 125 x 94 250 x 190 Dimensions of a 12.8x9.6mm cloud of dots pattern EFFILUX 7, avenue de l’Atlantique 91940 Les Ulis FRANCE Tel : +33 9 72 38 17 80 Fax : +33 9 72 11 21 69 Email : [email protected] WD = 300mm 450 340 180 75 EFFI-Lase Power Last update : May 21, 2013 Remarks concerning the power supply Prepare all the set up before connecting the device to the power supply. First connect the device to the power supply and then turn on the power supply Respect electrical conventions when you connect the device to the power supply 4 1 Maximum 700mA Pin number 1 3 4 Cable color Brown Blue Black 3 M8 connector Designation n.a. + GND Please contact EFFILUX technical support for additional details EFFILUX 7, avenue de l’Atlantique 91940 Les Ulis FRANCE Tel : +33 9 72 38 17 80 Fax : +33 9 72 11 21 69 Email : [email protected]