Transcript
AUTOPIX PC Camera for Teleconferencing & Video Surveillance MT4018
User’s Guide
EN Introduction Thank You for buying new Media-Tech PC camera. Following information will help you to use your camera to its full capabilities. For viewing pictures or video, camera must be connected to your personal computer. This camera supports Microsoft Video Class and plug & play directly without driver.
Package Contents ■ ■ ■ ■
PC camera USB cable CD-disc Manual
PC Camera Introduction
System Requirements ■ ■ ■ ■ ■ ■ ■ ■ ■
Pentium® P4 1.2G CPU Free USB2.0 port 256MB RAM internal memory minimum 500MB free hard disk space Internet connection CD-ROM drive Windows compatible sound card and speakers Windows® XP Service Pack II Windows Vista™
Note: If your system is Windows XP Service Pack I, please go to www.microsoft.com. It’s free to update your system to Windows XP Service Pack II.
2
Auto Focus Lens LED
Clamp
USB
Set up PC camera
EN
You can mount the PC camera on your laptop as diagram shows below. Plug the PC camera into the USB 2.0 port of PC or laptop properly. The focus will be adjusted automatically according to the subject moving.
3. The focus will adjust automatically according to the subject moving. 4. Click “Take a new picture” for snapshot.
Auto Focusing and Snapshot 1. Click “My Computer” 2. Click “USB Video Device” from Scanners and Camera. 3
EN Software Installation ArcSoft VideoImpression 2.0 1. Turn on the computer and insert CD installation Disc into your CD-ROM drive. Select and click “ArcSoft VideoImpression2.0”
2. Choose Setup Language 3. Click “Next”
4
4. Click “Yes”
5. Click “Next”
6. Click “Next”
7. Click “Finish”
ArcSoft PhotoImpression 5.0 1. Turn on the computer and insert CD installation Disc into your CD-ROM drive. Select and click “ArcSoft PhotoImpression5.0”
Snapshot
EN
by ArcSoft PhotoImpression 5.0 1. Click on the “PhotoImpression 2.0” icon on the desktop. 2. Choose Setup Language 3. Click “Next”
2. Click “Video” from “Get Photo”
4. Click “Yes”
5. Click “Next”
6. Click “Next”
7. Click “Finish” 5
EN
3. Click “Live”
Live Video Playing ArcSoft VideoImpression 2.0 1. Click on the “VideoImpression 2.0” icon on the desktop.
2. Click “Create a New Video”
4. Click “Capture” for capture image and the picture is saved.
3. Click “Capture From Device” 6
4. Click “Record”, save video name and then click “Stop”.
5. Click “Done” to finish. Now you can play the video.
EN
7
EN Camera Specification Image Sensor ................................................. Lens Specification .......................................... White Balance ................................................ Exposure......................................................... Frame Rate ..................................................... Focus Range ................................................... Depth of Field ................................................ PC Interface .................................................... Video Format.................................................. Audio .............................................................. Video Capture Res. ........................................ System Requirements ...................................
Snapshot ........................................................ Still Capture Res. ............................................ Power .............................................................. Bundled Software ..........................................
1280x1024 pixels, CMOS F2.8, f=4.02mm, auto focus lens Auto Auto 1280x1024 pixels @ 8~10fps 640x480 pixels @ 30fps Auto focus, 7cm to infinity 50cm to infinity USB2.0 AVI Built-in microphone 1.3mega/ 640x480/ 320x240 Support Microsoft Video Class Win XP Service Pack II / Vista Without driver Software Up to 1.3M pixels From USB port ArcSoft VideoImpression 2.0 ArcSoft PhotoImpression 5.0
Specifications are subject to change without prior notice. 8
