Transcript
VEEC ASSIGNMENT FORM The creation of VEECs requires evidence that the system has been decommissioned and removed from the premises wherever practical. This can be fulfilled by the following: • •
A photo of the old system which clearly shows it cannot be used anymore, e.g. it has a large hole in it and has the make, model and serial number written on the back or clearly in the photo or, A Declaration of Decommission (Part B of this document) has been fully completed.
PART A – APPLICATION FORM (RETURN TO QUANTUM) Please return completed application forms via one of the following. Be sure to keep a copy for your records and call 1800 383 888 to confirm receipt. • Email:
[email protected] • Post: PO Box 553, Strawberry Hills, NSW 2012 • Fax: 02 9699 7445
MANDATORY DECLARATION I hereby declare that: •
I am the tenant/landlord/owner (please delete as appropriate) of the residence at the above installation address.
•
where a replacement has occurred, the replaced heating system has been removed from the premises.
•
the information provided by the installer in 6-8 is correct and complete.
•
I understand that by signing this form I am assigning the right to create VEECs for the system to Quantum Energy Technologies.
•
I have received/will recieve an identifiable benefit from Quantum Energy Technologies in exchange for assigning my rights to create the VEECs for the above system.
•
the Essential Services Commission has the right to inspect the installed system with reasonable notice.
•
I understand that information on this form will be disclosed to the Essential Services Commission for the purpose of creating VEECs under the Victorian Energy Efficiency Target Act 2007 and for related verification, audit and scheme monitoring purposes.
•
I am aware that penalties can be applied for providing misleading information in this form under the Victorian Energy Efficiency Target Act 2007.
In exchange for assigning my right to create these VEECs I will receive from the Agent: Monetary Payment – Direct Deposit (amount to be confirmed) Bank Name: ____________________________ Account number: _________________
Consumer Signature:
BSB: _________–_________
Account name: ____________________________________
Date:
MANDATORY FORM FIELDS To be completed by Consumer 1
Consumer Details Name:
First Name
Postal Address:
Street Address City
Surname
State
Telephone
Postcode Fax
Contact Numbers: Mobile Email:
2
3
Have you received a compliance certificate for the work?
Yes
No
Have you received a certificate of electrical safety for the work?
Yes
No
Have you taken a photograph of the decommissioned tank?
Yes
No
Solar Hot Water System Details Date of Installation: (DD/MM/YYYY) System Brand:
____ / ____ / ________
Quantum
System Model: eg 270-11AC4-134
_________–_________–_________ Serial Number: eg SUZ012345 Size of Tank: Compliance Certificate Number: (Copy of Certificate Must be Attached) Certificate of Electrical Safety Number:
SUZ________________ _____________ Litres
4
Form of Benefit Provided Delayed cash
Refer to Part A – Mandatory Declaration for payment options and details.
5
VEEC ELIGIBILITY – Number of VEECs this system is entitled to: I understand that this system is eligible for the following number of VEEC’s To calculate the number of VEECs your system is eligible for, please refer to the VEEC Calculator:
https://www.veet.vic.gov.au/Public/Calculator/VEECCalculator.aspx Important Information: • Accredited persons must ensure that the number of VEECs created for a prescribed activity is correct and in accordance with the requirements of the Victorian Energy Efficiency Target Regulations 2008 (the Regulations). • The ESC has prepared the VEEC Calculator to assist you, but you should not rely on this calculator to discharge your legal responsibilities. • The ESC does not guarantee the accuracy of the calculator. It is up to you to verify the accuracy of your submission.
To Be Completed by Installer 6
Installer Details Name:
First Name
Surname
Company:
Company Name
ABN
Postal Address:
Street Address City Telephone
Contact Numbers: Mobile Email: Plumbing License Number: Electrician Licence Number:
State
Postcode Fax
7
Decommissioning Activity Conducted 1C - Decommissioning electric and installing electric boosted solar
8
Installer Declaration I hereby declare that: • • • • • •
I am licensed to undertake the installation of the system. the system has been installed in residential premises. the replaced system has been removed from the residential premises and will be decommissioned (where installation does not involve a pre-heater or retrofit). a photograph was taken of the decommissioned tank (preferably with 2 holes drilled into the tank the installation meets all laws, standards, building codes and local council requirements. the information provided is complete and accurate and that I am aware that penalties can be applied for providing misleading information in this form under the Victorian Energy Efficiency Target Act 2007.
Installer Signature:
Date:
Part B - Declaration of Decommission (RETURN TO QUANTUM) 1
Consumer Details Name:
First Name
Surname
Decommissioned Hot Water System Details 2
System Brand & Model (if legible):
Brand
Model
Serial Number (if legible): Approximate Age: System Type:
3
Decommissioning Details Method of Decommissioning: Method of Removal (or reason if not removed):
Have you attached a photograph of decommissioned tank? Yes
No (if no, please provide a reason)
Installer Name: __________________________________ Signature: __________________________________
Date: _________________
PART C – VEEC GUIDELINES (DO NOT RETURN TO QUANTUM)
VEECs are managed by the Victorian Government Victorian Energy Efficiency Target under the Essential Services Commission.
For more information, please contact: Victorian Energy Efficiency Target Lvl 2, 35 Spring St, Melbourne VIC 3000 W https://www.veet.vic.gov.au/ T (03) 9651 4911 E
[email protected]
To create Victorian Energy Efficiency Certificates (VEECs): •
• •
You must be the owner of the VEECs, either by having installed an eligible system at your property, or by having the VEECs correctly assigned to you by the original owner of the VEECs. You must have all the correct and signed documentation required to create VEECs. You must create VEECs within 6 months of the end of the calendar year in which the system was installed.
Guide for Creating VEECs for Quantum Heat Pump Systems This guide explains how to create Victorian Energy Efficiency Certificates (VEECs). In the context of solar water heaters (SWHs), the calculation of a VEEC is the abatement factor x regional factor. The abatement factor is determined by the product and the regional factor is determined by the postcode.
The Victorian Energy Efficiency Target (VEET) is a Victorian Government initiative promoted as the Energy Saver Incentive.
Mandatory introductory information Consumers in respect of whom a prescribed activity is undertaken can create Victorian energy efficiency certificates (VEECs) under the Victorian Energy Efficiency Target Act 2007. One VEEC represents one tonne of carbon dioxide equivalent (CO2-e) to be reduced by the prescribed activity undertaken by the consumer. Consumers are able to assign their right to create VEECs to an accredited person. In assigning their right to an accredited person, the accredited person will be entitled to create and own the certificates in respect of the prescribed activity undertaken by the consumer. In return, the accredited person should provide consumers with an identifiable benefit for the assignation, such as a price reduction on a product, free installation or a cash-back arrangement. Consumers should be aware that it is their responsibility to negotiate satisfactory terms with the accredited person in return for assigning their right to create VEECs.
