Transcript
March 6, 2012
Sales Alert: New 4-Channel H.264 Encoder Replaces Vicon’s KTX-4 Model, Offering Superior Performance at a Lower Cost Per Channel. Vicon’s new H.264 offers a modern, standards-based edge device for the encoding of analog cameras. This embedded device is specifically designed to integrate into the ViconNet Video Management System (VMS). The tight integration provides advanced features, in including museum search, analytics, dynamic load balancing and automatic detection within the ViconNet VMS. It offers full support of NTSC/EIA and PAL/CCIR video cameras. Features include:
Up to 4 analog camera video inputs
Auto-sense NTSC or PAL video system
H.264 video compression only (ViconNet compression is not supported by this encoder)
Maximum video transmission rate of up to 120 ftp (100 fps PAL) at 4CIF or D1 resolution
Dual streaming supported
4 alarm inputs and 4 relay outputs
4 microphone inputs (line level)
Powered by PoE or 24 VAC external power supply
Scalable to allow adding units to handle any number of cameras
Rack mounting kits accommodate either two units horizontally (1 RU height) or 8 units vertically (5 RU height) within a 19” rack
A chart on the following page compares features and performance between the KTX-4 and the H264-ENCDR.
Ordering information is provided below. Units are now in stock and ready to ship. H.264 4-Channel Encoder and Accessories Description
Model Number
Product Code
H264-ENCDR
8959-90
$
1988
Rack Mounting Kit for 2 units
H264-ENCDR-RK2*
8959-30
$
145
Rack Mounting Kit for 8 units
H264-ENCDR-RK8
8959-65
$
577
Wall Mounting Kit
H264-ENCDR-WM*
8959-40
$
59
PRO-SVC-CAMIP
10108-05
$
10
4-Channel Encoder
Pre-Configuration Services
MSRP
*Note that model numbers for the 2-unit rack mount and wall mount kit have changed to reflect compatibility with the new unit, but product codes will remain the same. A new model and product code have been assigned to the 8-unit rack mount kit as it is slightly different than what has been used in the past.
vicon-security.com
Feature Comparison Feature
KTX-4 (old encoder)
H264-ENCDR (new)
Network Settings
Yes
Yes
Site Authorization
Supports 20 groups and 100 users
Supports 500 groups and 500 users in each
Backup / Restore Settings
Yes
Yes
Device Settings
Yes
Yes
Alarms
Yes
Yes
Quality & FPS Priority
Yes
Yes
ViconNet only
H.264 only
Dual Streaming
No
Yes
Settings Summary
Yes
Yes
Streaming Methods: TCP / UDP / Multicast
No
Yes
Reports
Yes
Yes
Picture Settings
Yes
Yes
PTZ Control
Single Output
4 Output IDL
Microphones
2 Audio input
4 Audio input
No
4 Relays
Video Compression
Relays
H264-ENCDR Concurrent Client Support at D1, 30 fps Transmission Type
Number of Streams
TCP
Low motion: 16 Medium motion: 12 High motion: 8
UDP
Low motion: 20 Medium motion: 16 High motion: 12
Multicast
unlimited
