Transcript
Model SS-B Basic Dewpoint Sample System The Model SS-B is a simple yet a very effective design and is easy to install. Manufactured by Alpha Moisture Systems and sold around the world, this unit is a popular choice for most industries needing a basic solution for continuous dewpoint analysis in dry gases.
Low Cost Solution - Simple to Install and set up - Compact Design How it works is easy. Gas flow is connected from the isolation valve to the inlet of the regulator shown here on the right of the picture, gas flows from the outlet of the regulator then enters the flow meter, that can then be adjusted from 0-5 lpm, from the outlet of the flow meter it then enters the bottom of the transmitter or sensor holder, as shown here, exiting at the top of the holder and returning back to source or vented to atmosphere.
FEATURES
• Reduce inlet pressure from up to 210bar (3,045PSI) • Adust gas flow up to 5 litres per minute • High grade components and manufactured by us to CE standard. • Strong pre-drilled 3mm hammer coated mounting plate
• All high grade stainless steel components, fittings and pipework with exception of the flow meter which is nickel plated brass • Inlet and outlet fitting available in 1/8” 1/4” and 6mm • Wall mounted with 4 x 4mm pre-drilled holes
The SS-B can be adapted (by addition of) a standard filter unit or coalescing type filter to the base unit if required , please state at point of order. The SS-B is most suited for Alpha DS1200-AMT, DS1200-PDT and DS2000 dewpoint hygrometers but can be adapted to suit most makes of hygrometers.
SPECIFICATIONS MODEL SS-B PRESSURE REGULATOR: up to 210bar (3,045 PSI) OUTLET PRESSURE: Maximum 10bar (145 PSI) FLOW METER: 0-5 litres per minute SENSOR HOLDER: Stainless Steel
INLET / OUTLET FITTINGS AVAILABLE IN: 1/8”, 1/4” and 6mm tube BACK PLATE DIMENSIONS (HxWxD): 260 x 160 x 3mm MOUNTING HOLES: 4 x 4mm 10mm from edge. WEIGHT: approx
See more Sample Systems and options at www.amsystems.co.uk © 2012 Alpha Moisture Systems Ltd.
1 OF 2
Alpha Moisture Systems Model SS-B Sample System
Ordering a Model SS-B Dewpoint Sample System is simple. We will need to know what type of Dewpoint Hygrometer you wish to fit, this determines the type of Transmitter/Sensor Holder that will be needed, also the size of the Inlet fitting and Outlet fitting. The DS1200-AMT, DS1200-PDT and DS2000-Sensor Hygrometers use different holders because of the thread diameter on the Transmitter or Sensor. Please use the two steps below to help us. To Order a Dewpoint Hygrometer for your SS-B you will need to order this separately using the data sheet for that Hygrometer as a guide. Simply follow the How to Order Steps or contact us.
How to Order - Step 1 of 2 Indicate which Dewpoint Hygrometer
How to Order - Step 2 of 2 Choose Inlet/Outlet fittings here.
SS-B + [XX] DS1200-AMT
Inlet Fittings
Outlet Fittings
SS-B + [XX] + [X] + [X] Hygrometer from Step 1
Ranges available between:
-1100C to +200C Td DS1200-PDT
=[DA]
Fixed range
-400C to +300C Td
=[DP]
DS2000-Sensor Ranges available between:
-1100C to +200C Td Other Please Specify.
=[DS] =[OT]
X = Choose size of INTLET fitting. 1/8” = 8 Pipework to pressure 1/4” = 4 regulator 6mm = 6 X = Choose size of OUTLET fitting. 1/8” = 8 Pipework out of 1/4” = 4 sensor holder 6mm = 6
Order Example:- For DS1200-AMT Hygrometers with 2 x 1/4” Inlet/outlet fittings Order: SS-B - DA - 4 - 4
To Order Hygrometers Separately - Use the How to Order Guide on the relevant data sheet.
RELATED PRODUCTS Standard Low and High Pressure Sample Systems
Model SS-1 & 2 (LOW) and SS-3 & 4 (HIGH) Built for multiple applications. Includes Sensor Holder, Adjustable Flow Meter, Pressure Regulator(s), Gauge(s), Filter, Process and auxiliary sample inlets with manual selection valves.
Large Range of Accessories
Made to Order Sample Systems
High quality accessories and replacement components available from stock. See our website for more details.
Purpose built Sample Systems made to order in Stainless Steel or ABS plastic cabinets. Designed to your specifications. Standard, Natural Gas, Aggressive gases (Excluding Ammonia)
For more details on any of our products please visit our new website www.amsystems.co.uk
See more Sample Systems and options at www.amsystems.co.uk Product specification may be subject to change, without prior notice, as part of our ongoing product development programme.
CERTIFICATE No. FM35600 BS EN ISO 9001:2008
Alpha Moisture Systems Limited. Registered Office: Alpha House, 96 City Road, Bradford, BD8 8ES Registered in England and Wales No. 3902302 - VAT Registration No. GB 607 2075 63 - WEEE Producer Registration No. WEEE/EA0067TX
© Alpha Moisture Systems Ltd.
1883 Model SS-B pd141112-Iss-1
Tel
+44 (0) 1274 733100
Fax
+44 (0) 1274 733200
Email
[email protected]
Website
www.amsystems.co.uk 2 OF 2
