Transcript
Components:
Wall Mount Tubing Kit Instructions Instructions
32-mm tubing (P/N 65939700 ...... 2’ [0.6-m] 19-mm tubing (P/N 65939600 .... 18’ [5.5-m] Tubing Fastener Kit (P/N 91515168) ........ 1 {kit includes the following} 1.25” [3.2-cm) clamp ....................... 2 .5” [1.3-cm) clamp ........................... 1 #6 wood screw ................................ 8 cable tie .......................................... 8 cable tie mounting base ................. 8 instructions (P/N 10428100) ........... 1
Intended Use: Wall Mount Veterinary Active Scavenging System
Requirements / Restrictions: Ceiling application only. Do not run along floor.
WARNING Tubing must not run along floor. Suspend tubing from wall(s) or ceiling (tube fastener kit included).
Step 2: Connect tubing to ceiling.
Step 4: Connect and securely clamp tubing to Gas Disposal System.
Note: Refer to “Scavenging Hose Suspension Installation” instructions for preferred and alternate methods. (P/N 10428100 [included]).
19-mm Tubing
Gas Disposal System
32-mm Tubing
APL Valve
Active Scavenger System Interface
Step 3: Connect 19-mm tubing to APL valve. 1.25” (3.2-cm) Clamp
CAUTION Do not clamp. Tubing should be easy to disconnect from gas-collecting assembly in the event of malfunction or downstream occlusion in the scavenging system.
.5” (1.3-cm) Clamp
Step 1: Connect and securely clamp tubing to Active Scavenger System Interface on wall. Note:
Run 19-mm tubing close to outside wall; shown this way for connection clarity only.
Note: Matrx by Midmark VMS Small Animal Anesthesia Machine shown, tubing installation will be similar for other manufacturers’s anesthesia machines. MX103300i
© 2007 Midmark Corp.
60 Vista Drive Versailles, OH 45380 USA
1-800-643-6275
midmark.com
1
10428300
Rev. (E)
