Transcript
C HANNEL V ISION POWER
MODEL A0505
1 S O U R C E
2
3
4 ZONE POWER
CAMERA
1
2
3
4
CATV MUTE MOD VOL
A0505 REMOTE CONTROL
7
The A0505 allows you to operate many of Channel Vision’s whole-house audio/video systems without needing to touch the keypad. Additionally, this remote provides shuttle controls for the A0312, A0314, AB-313 and other compatible iBus® products. Features: ! Easily controls your whole-house audio/video system ! No programming necessary ! Compatible with: P-1044, AB-124, A4601, A4603, A4623, AB-313, A0312 and A0314 iBus Shuttle Control Buttons Compatible with A0312, A0314, AB-313 and other iBus wall docking stations. Not compatible with AB-311
C HANNEL V ISION POWER
Zone Power Turns off Audio and Video for the zone you are in.
MODEL A0505
1 S O U R C E
2
System Power Button Turns on/off all zones of the multi-zone audio system. Source Selection Buttons
3
4 ZONE POWER
P-6014 functions: Camera Next Camera Cycle 1 Camera 1 2 Camera 2 3 Camera 3 4 Camera 4
CATV Selects the CATV input on the Affinity MOD Selects the modulator input on the Affinity
2
CAMERA
1
2
3
4
CATV MUTE
Mute Mutes audio, but video will continue.
MOD VOL
Volume Up/Down Adjusts the volume for the zone you are in.
Using the A0505 remote control... The A0505 is designed to allow you to control your A4601, A4603, or A4623 without having to touch the buttons on the A0127. Simply point the A0505 remote control at the IR sensor located at the bottom of the A0127 and press the desired button. Zone Power - Turns on/off the zone you are in Power - Master power for A4601, A4603, and A4623 (turns all zones on/off)
C HANNEL V ISION POWER
MODEL A0505
Vid 1 Vol +
1
Vid 2 S O U R C E
Source Buttons
2
Vid 3
Vol -
3
Vid 4 4 ZONE POWER
CAMERA
1
2
3
4
Pwr
Mute
CATV MUTE MOD VOL
Mute - Mutes the audio for the zone you are in
C HANNEL V ISION POWER
MODEL A0505
VOL - Controls volume for the zone you are in
1 S O U R C E
2
3
4 ZONE POWER
CAMERA
1
2
3
4
CATV MUTE MOD VOL
iPod
A0312 or A0314 or AB-313
Using the A0505 remote with iBus... Your iPod’s shuttle controls can be operated from the A0505 when it is docked in a compatible iBus wall station.
3
Using the A0505 remote control... Multi-Source A-BUS The A0505 is designed to allow you to control your P-1044 without having to touch the buttons on the AB-124 keypad. Simply point the A0505 remote control at the IR sensor located at the bottom of the AB-124 and press the desired button.
Zone Power - Turns on/off the zone output of the P-1044 that the AB-124 is connected to Power - Turns on/off the AB-124 amplified keypad.
C HANNEL V ISION C HANNEL V ISION POWER
MODEL A0505
1 S O U R C E
2
3
4 ZONE POWER
CAMERA
1
2
3
4
Source Buttons Pressing buttons 1-4 will cause the corresponding LED indicator to light. Pwr Source
CATV MUTE MOD VOL
Mute - Mutes the AB-124 keypad
C HANNEL V ISION
VOL - Controls volume for the AB-124
POWER
MODEL A0505
1 S O U R C E
CAMERA
3
1
2
3
4
CATV MUTE MOD VOL
4
2
4 ZONE POWER
Using the A0505 remote control... P-0321 or P-0328 The A0505 is designed to control your Affinity (P-0321 or P-0328), enabling you to easily switch between two different RF signals. Just point the remote to an IR receiver connected to the coax-based IR system and the IR signal will travel back to the Affinity and change it to the desired input.
P-0321
Input from CATV
Pat. Pending
Power
Input from Modulator
PRO
Model P-0321
CHANNEL V ISION TM
MOD Input
CATV Input
IR Out Output
IR Coax Adaptor with IR receiver
Note: See TV connection details on the following page Digital CATV Box C H
T/ U O
N R ut IS IO NE /o IN L V -2 MBIssing O E . HS/C pa N No ER rt DC N rt Po Pa LITTAll SP Hz AY -1G W Hz 2- 5M in
A
TM
2
V L E N N
S
A
3 4 3 M O D
CA TV
VO L
M UT E
CA
Z PO ON W E ER
M
ER A
1
4
2
M A 0 OD 50 E L 5
E
C
R
C
U
O
H
1
IS
PO IO W N ER
in
T/ U O
TV set MOD - Selects the modulator input on the Affinity CATV - Selects the CATV input on the Affinity 5
Using the A0505 remote control... P-6014 Camera Sequencer The A0505 is designed to allow you to control the switching functions on your P-6014. The A0505 allows you to choose any of the 4 cameras or select the Auto Cycle mode.
P-6014
Max st Time Adju
CAT5 CA 1 Camera
ER EQUENC MERA Ssent
Camera
2
3 Camera
Camera
4
PRO L
C HA NN E V IS I ON
TM
Model P-6014
t1 Loop Ou
RS-232
Video Pre
2 Loop Out
t3 Loop Ou
t4 Loop Ou
Monitor 1
IR Input
Video IR Outpu
t
Audio
Inputs Power
Camera
1
Camera
2
3 Camera
4 Camera
Note: Camera connections are not shown in this diagram, but the P-6014 can support up to 4 CAT5 cameras.
Monitor 2
IR-2400
CAMERA
1
2
3
4 N
CH
AN
EL
V IS
IO
N
R WE PO
1 2 S O U R 3 C E
L DE MO 505 A0
4 2 1 NE ZO WER PO
CA
MER
4
A 3
TE MU
What these buttons do: Camera Next... Changes the Monitor output to the next camera in the sequence. If you’re viewing camera 1, pressing it once will show camera 2 and so on. Camera Cycle... Causes the Monitor output to sequence through the cameras. The time adjustment on the P-6014 determines how long each camera view is displayed before switching to the next one. 1, 2, 3, 4 Camera Views... Changes the Monitor output directly to the corresponding camera input. TV CA
MO
6
D
L VO
A0505 IR codes in HEX format... Some high-end programmable remote controls allow installers to input and store IR codes in HEX format. These codes are listed below: All Power: 0000 006D 0000 000C 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 001F 001F 0CC3 iBus Play/Pause: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 003F 003F 003F 001F 0CA2 iBus Skip <<: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 003F 001F 001F 003F 003F 001F 0CA2 iBus Skip >>: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 003F 001F 001F 003F 003F 0CC3 Mute: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 003F 003F 003F 001F 001F 0CCA Source 1: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 003F 001F 001F 003F 001F 001F 001F 001F 0CCA Source 2: 0000 006D 0000 000C 001F 001F 001F 001F 0040 0040 001F 001F 001F 001F 001F 001F 0040 0040 001F 001F 001F 001F 001F 001F 001F 001F 001F 0CA9 Source 3: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 003F 003F 001F 001F 001F 001F 001F 0CAA Source 4: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 003F 001F 001F 001F 001F 003F 001F 0CAA Volume Down: 0000 006D 0000 000C 001F 001F 0040 001F 001F 0040 001F 001F 001F 001F 001F 001F 0040 001F 001F 001F 001F 001F 001F 001F 001F 0040 001F 0CAA Volume Up: 0000 006D 0000 000C 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 0CA6 Zone Power: 0000 006D 0000 000C 001F 001F 001F 001F 0040 0040 001F 001F 001F 001F 001F 001F 001F 001F 0040 001F 001F 001F 001F 0040 001F 001F 001F 0CA9 Camera 1: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 003F 001F 001F 003F 001F 001F 003F 001F 0CA5 Camera 2: 0000 006D 0000 000C 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 0CA5 Camera 3: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 001F 001F 003F 003F 003F 0CC5 Camera 4: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 003F 003F 0CC5 Camera Next: 0000 006D 0000 000C 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 0CA5 Camera Cycle: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 003F 0CC5 CATV: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 0CC5 MOD: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 001F 001F 003F 003F 001F 001F 001F 0CA5
7
Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for two years from the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the original purchaser, and a purchase receipt, invoice, or other proof of original purchase date will be required before warranty repairs are provided. Mail in service can be obtained during the warranty period by calling (800) 840-0288 toll free. A Return Authorization number must be obtained in advance and can be marked on the outside of the shipping carton. This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel Vision Technology, your dealer or any factory-authorized service center.
www.channelvision.com 234 Fischer Avenue, Costa Mesa, California 92626 USA (714)424-6500 (800)840-0288 (714)424-6510 fax email:
[email protected] 500-200 rev A
