Transcript
12 Fiber MPOptimate hydra cable 40G to 4x10G Spec Sheet
The MPOptimate 12 fiber hydra cables are designed for 40 Gigabit QSFP equipment connections supporting dual fiber 4x10 Gigabit applications. The MPOptimate system supports up to 6 cassettes in a channel, while still meeting the attenuation and return loss specifications for datacenter applications such as 10-40-100 Gigabit Ethernet, 4-8-16G Fibre Channel or InfiniBand. The 12 fiber MPOptimate hydra patch cables are used to connect 40Gigabit QSFP transceivers on one side and 10G MPOptimate cassettes on the other. They can also be used to direct connect two network devices with 40G QSFP and 10G SFP+ transceivers. The 12 fiber MPOptimate hydra cables have 3.2mm round, indoor rated cable on the MPO side and 2.0mm round indoor rated cable on the LC side.
Features • Pre-terminated low loss MPOptimate hydra cable • Fiber path supports dual-fiber 10 Gigabit deployment via 40 Gigabit • Equipment connections (4x10 GbE paths per QSFP port) • OM4 bend insensitive fiber glass in an LSZH round cable jacked • Mated MPO performance for OM4: Attenuation ≤ 0.35 dB(max.) RL ≥ 28 dB(min) • Mated LC performance for OM4: Attenuation ≤ 0.15 dB(max.) RL ≥ 35 dB(min) • Each product is individually tested to ensure that it’s performance meets or exceeds the required standards. The test results are supplied with each product.
1
For more information, visit commscope.com
12 Fiber MPOptimate hydra cable 40G to 4x10G Spec Sheet
Specification PLEASE NOTE – THE FOLLOWING TEXT HAS BEEN WRITTEN SO THAT YOU CAN SIMPLY CUT AND PASTE IT DIRECTLY INTO YOUR TENDER DOCUMENTATION. MPO 12 fiber hydra cables shall be bend insensitive OM4 LSZH, indoor, 12 fiber cable with a diameter of 3.2 mm. The LC tails shall be a 2.0mm, 2 fiber round cable and the LSZH outer jacket color shall be AQUA with a flammability rating according IEC 60332 Parts 1 and 3. One side of the cable shall have a 12 fiber female MPO connector and the other side shall have four LC duplex uniboot connectors. The wiremap must support direct connect of two network devices with 40G QSFP and 10G SFP+ transceivers. See wire-map table below.
Typical applications, drawing and wire map: 1x40G to 4x10G 4x10G
2
For more information, visit commscope.com
12 Fiber MPOptimate hydra cable 40G to 4x10G Spec Sheet
Technical Details Connector Type MPO/MTP*
12 fiber (2 row) low loss MPOptimate connector
* The MTP multi-fiber connector is US Conec’s trademarked name for an improved MPO connector. The CommScope MPOptimate connectors meet and exceed the MTP performance.
Optical Characteristics Mated MPO Attenuation
OM4 typical 0.17dB max. ≤ 0.25dB
Mated MPO Return Loss
OM4 ≥28dB
OM4 fiber
Optobend bend insensitive fiber , IEC 60793-2-10 type A1a.2 / A1a.3, ISO/IEC 11801 OM3 / OM4, TIA/EIA-492AAAC / 492AAAD
OM4 bandwidth
OFL bandwidth ≥ 3500 MHz.km @ 850nm /EMB ≥4700MHz.km @ 850nm
Mechanical Characteristics Operating Temperature
-10 to +60º
Flammability
IEC 60332 Parts 1 and 3
Approvals/Compliance Structured cabling:
ISO/IEC 11801 / Cenelec EN 50173-1 / TIA-568 C.0
Data Center:
Cenelec EN 50173-5 / ISO/IEC 24764
Application:
Ethernet IEEE 802.3; 10/40/100GbE / Fiber Channel PI5; 4-8-16G / InfiniBand Architecture spec Volume 2
Connectors:
IEC61754-4.20; IEC61754-7; IEC61755-3-1; IEC 61300-3-30; TIA 604-5-D (FOCIS 5); EN50377-15-1
RoHS Compliant * Specifications subject to change without notice.
Ordering Information Description 12 fiber MPO to 4x LC duplex, OM4
Lengths*
Maps
Catalog Numbers
0-80 meter
40G to 4x10G see wiremap table
y-2160510-x
* X and Y indicate the length of the patch cable. Cable lengths (“L”) from 0-80 meter are defined in length table with part number 2160070. * Specifications subject to change without notice.
www.commscope.com Visit our website or contact your local CommScope representative for more information. © 2015 CommScope, Inc. All rights reserved. MPOptimate and all trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. PS322415-EU (12/15) previously 2160510
