Transcript
CMB-672/674 Mini Barebone system Intel High Performance Platform Installation Guide Edition 1.0 2006/07/30
CMB-672/674 Installation Guide
z z z
Packing List Product Specification Hardware Installation
Packing List: CMB-672/674 Chassis x 1
(Including LV-672/LV-674 Motherboard)
DCP-PSG300 300W AC-DC Adapter x1 Slim FDD Cable x 1 40-pin to 40-pin UDMA IDE Cable x1 SATA Cable x2 PCIE-3P1 x1 IDE to Slim CD-ROM Module x1 CD Driver x1 Raid Driver disc x1
2
CMB-672/674
Document Content:
CMB-672/674 Installation Guide
Hardware Installation: Motherboard placement JLAN1 JLAN2
CDIN
CN_12V
PCI-Express
SATA CPU Socket
NBFAN CPUFAN JFRNT USB
SYSFAN JRTC
IDE
DDRII 1/2
ATX
FDD
JDOM
Components showed is available for CMB-672 only
For Connector
For Jumper
3
CMB-672/674 Installation Guide ATX
CN_IR
IDE
SYSFAN
JFRNT
DDRII 1/2
USB JRTC
FDD NBFAN
SATA Port
PCI-Express CN_12V
SPDIF CN_AUDIO
CPUFAN
CN_1394
Mini_PCI
Components showed is available for CMB-674 only
For Connector
4
For Jumper
CMB-672/674 Installation Guide
I/O panel: LV-672/LV-674 Front:
CD-ROM Power Button
FDD
Power LED
Reset Button
HD LED USB
5
CMB-672/674 Installation Guide
LV-672 Rear:
Lan Port COM Port
COM Port Keyboard Line-Out Mouse
6
PCI-E Port
VGA
Antenna
USB
IEEE1394 Power Supply
Line-In
Mic Phone
CMB-672/674 Installation Guide
LV-674 Rear:
Antenna Lan Port 1/3
PCI-E Port VG A 1394
KB/MS COM Port 1/2
Lan Port 2/4
Power Supply USB
Center
LINE-IN
Rear Speaker
LINE-OUT
Side Speaker
MIC-IN
7
CMB-672/674 Installation Guide
Chassis Setup procedure:
1. Turn the chassis screws.
2. Push the Chassis shield towards the back then open it .
2 1
8
CMB-672/674 Installation Guide
3. Turn the holder screws and open it.
4. Be carefully to take the CPU Fan off.
9
CMB-672/674 Installation Guide
5. Open the CPU cover and refer the motherboard manual page.16 to install the CPU. (After installed CPU, please remember to install the CPU Fan back )
10
CMB-672/674 Installation Guide
6. Open the Dimm holder then check the pin number to match the socket side well before installing memory module.
7. Press down the memory module then check dimm holder hook well.
11
CMB-672/674 Installation Guide
8. Turn the PCI-E port shield’s screw and take shield off refer picture A and B. (If you don’t install PCI-E card, please direct to Step 11 .) (A).
(B)
12
CMB-672/674 Installation Guide
(C)
9. Put into the PCI-E Card. And Check the connects into the riser card well then turns shield screw.
13
CMB-672/674 Installation Guide
10. Take the holder to install HD driver.This holder can install two 3.5” HD driver or four 2.5” HD driver. To refer the picture (a) and (b). (a)
2.5 HD Drive 1
2.5 HD Drive 2 (b)
2.5 HD Drive 3 2.5 HD Drive 4
14
CMB-672/674 Installation Guide
11. Put into HD driver and connect the cable well then turn the HD driver screws. (If you don’t have HD driver, please direct to step 12.)
15
CMB-672/674 Installation Guide
12. Before Install Floppy. Turn the CD-ROM and Floppy shield screw. (If you don’t have floppy,please direct to step 15. )
13. Take the CD-ROM and Floppy shield off.
16
CMB-672/674 Installation Guide
14. Turn the floppy Screws then refer motherboard manual page “21” to connect the floppy cable correctly.
17
CMB-672/674 Installation Guide
15. Before Install the CD-ROM. Turn the CD-ROM shield screws and take it off. (If you don’t have the CD-ROM, please direct to step 18. )
16. Insert CD-ROM into the chassis from front panel.
18
CMB-672/674 Installation Guide
17. To tighten the CD-ROM and holder screws.
18. To tighten the chassis shield screws well.
19
CMB-672/674 Installation Guide
Mini-PCI card Setup procedure(For CMB-672):
1.
Turn the mini-PCI chassis shield screws.
2.
Take mini-PCI chassis shield off.
20
CMB-672/674 Installation Guide
3.
Follow the Idiot-proof design then insert the mini-PCI card then press down.
1 Push 2 Press
4.
To close mini-PCI chassis shield and tighten a screw.
21
CMB-672/674 Installation Guide
Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate to contact with us. We will do our best to support you for your products, projects and business
Taiwan Commate Computer Inc. Address
19F, No. 94, Sec. 1, Xintai 5th Rd., Xizhi Dist New Taipei City, Taiwan
TEL
+886-2-26963909
FAX
+886-2-26963911 http://www.commell.com.tw
Website TU
UT
[email protected] (General Information) TU
UT
E-Mail
[email protected] (Technical Support) TU
Facebook Twitter
UT
https://www.facebook.com/pages/Taiwan-Commate-Computer-Inc/547993955271899
https://twitter.com/Taiwan_Commate
Commell is a brand name of Taiwan Commate Computer Inc.
22
