Transcript
GB.TBSA4252.050101
INSTALLATION – TBSA DAMPER GOLD Sizes 42-52
Connection to the ducting
Electrical Connection
The damper can be fitted in the ducting or directly to the air handling unit. Secure the damper with a sealing strip and slip clamps with PG connection. The damper can be installed either in a horizontal or a vertical duct. Allow adequate clear space for replacement and inspection. Insulate the damper according to local standards for ventilation ducting.
The electrical connections are to be wired by a qualified electrician in accordance with local regulations. TBSA with spring return Used as a shut-off damper. The damper motor (actuator) has a 0.9 m long connection cable 2x0.75 mm2 connection cable. Terminals on control circuit board
Dimensions
21
22
3
4
23
23
24
TBSA 160-080, matches GOLD sizes 42 TBSA 180-100, matches GOLD sizes 52
Damper motor GCA 321.IE H A
TBSA on/off Used as a shut-off or flow-boosting damper. The damper motor (actuator) has a 1 m long 3x0.75 mm2 connection cable.
C 160
TBSA
B
A
B
C
H
160-080
800
1640
1600
840
180-100
1000
1840
1800
1040
Terminals on control circuit board 21 22 23 23 24
3
1
2
Damper motor AM 230
Specifications are subject to alteration without notice.
www.swegon.se
1
