Transcript
THERMAL SCIENTIFIC INFRARED CAMERA TS-IR MW MIDWAVE SCIENTIFIC INFRARED CAMERAS The TS-IR infrared camera series is optimized to provide the most accurate and sensitive thermal images and measurements. The midwave (MW) version of these cooled high-performance infrared cameras is designed with versatility, flexibility and robustness in mind. Equipped with a rugged IP67 compact sealed enclosure, it is the ideal MW infrared tool for scientists in R&D to use in harsh environments.
KEY BENEFITS High Frame Rate : Acquisition rate up to 350 Hz frames per second full frame for high temporal resolution acquisition.
Motorized Filter Wheel : Split the scene signal into four
Benefit from easy to use, operational flexibility while getting accurate measurements over the camera’s entire operation range. Camera includes :
spectral channels and/or increase the camera dynamic range.
• Real Time Processing (NUC, radiometric temperature, in-band radiance)
High-Speed Internal Memory : 1 GB memory (16 GB
• Automated Exposure Control (AEC)
optional)
• Enhanced High Dynamic Range Imaging (EHDRI)
Advanced Triggering : Partition internal memory into
• Real-time Temperature Calibration (RTTC)
segments for back to back recording. Hardware TTL or automatic software trigger with pre and post triggering capabilities
• Real-time Radiance Calibration (RTRC) • HypIR Software
IP67 Enclosure : Compact, rugged, and sealed enclosure for harsh environment used. GenIcam compatibily, shipped with Telops HypIr.
GenICam Compatible
Helicopter IR signature/ranging analysis
Artillery muzzle flash analysis
TECHNICAL SPECIFICATIONS
TS-IR MW
DETECTOR SPECIFICATIONS
TS-IR MW
TS-IR MW
TS-IR MW
TS-IR MW
Detector type
InSb 3 µm to 5 µm
InSb
MCT
MCT
Spectral range
1.5 µm to 5 µm (optional)
3.7 - 4.8 µm
Spatial resolution Detector pitch Aperture size
3.6 µm to 4.9 µm (optional) 640 x 512 pixels 15 μm F/3
640 x 512 pixels 15 μm F/2 or F/4
Well depth
5.8 Me-, 1.5 Me-
5.5 Me- or 12 Me-
Sensor cooling
Rotary-stirling closed cycle
Rotary-stirling closed cycle
1.5 µm to 5 µm (optional) 3.7 µm to 4.8 µm (optional) 640 x 512 pixels 15 μm F/3 Selectable (260 fF, 200 fF, 120 fF, 70 fF) Rotary-stirling closed cycle
3 µm to 5 µm 640 x 512 pixels 16 μm F/4 5.5 MeRotary-stirling closed cycle
TYPICAL PERFORMANCES Frame rate
Scene temperature range calibration
350 Hz 650 Hz @ 320 x 256 4 500 Hz @ 64 x 8 0 °C to 150 °C Up to 600 °C (optional) Up to 1500 °C (optional)* Up to 2500 °C (optional)*
230 Hz
117 Hz 3 200 Hz @ 132 x 1
115 Hz 107 000 Hz @ 64 x 4
0 °C to 150 °C Up to 600 °C (optional) Up to 1500 °C (optional)* Up to 2500 °C (optional)*
0°C to 150 °C Up to 600°C (option) Up to 1500°C (option)* Up to 2500°C (option)*
0°C to 150 °C Up to 600 °C (optional) Up to 1500 °C (optional)* Up to 2500 °C (optional)*
Measurement accuracy
1 K or 1 % (°C)
1 K or 1 % (°C)
1 K or 1 % (°C)
1 K or 1 % (°C)
Typical NETD
20 mK
20 mK
18 mK
17 mK
Exposure time
0.5 μs to full frame rate
0.5 μs to full frame rate
0.1 μs to full frame rate
0.1 μs to full frame rate
Windowing to increase frame rate
Yes
Yes
Yes
Yes
Dynamic range
16 bits
16 bits
16 bits
16 bits
ELECTRONIC SPECIFICATIONS
CAMERA CONSTRUCTION Multi-Spectral capabilities
4 × / 1’’ optics, motorized filter wheel
Lens mount
Bayonet interface
Size w/o lens
12.6’’ × 7.8’’ × 5.3’’ 320.04 mm × 198.12 mm × 134.62 mm
Weight w/o lens
< 6 kg
*2 % for 1500 °C and 2500 °C optional. Actual product may differ and specifications are subject to change without notice. Other specifications available upon request.
ENVIRONMENTAL SPECIFICATIONS
BACK PANEL INTERFACE
Environmental rating
2. Power
IP67
1. CameraLink base/full 3. Thermistor
Operating temperature range
4. RS-232: Camera remote control
-20 °C to +55 °C
5. IRIG-B
Storage temperature ranges
6. HD-SDI
-40 °C to +65 °C
7. Trig-in : Trigger the camera on TTL signal
Operational Vibration
8. Trig-out : Output TTL signal
IEC-60068-2-64
9. Ethernet : GigE Vision compatible
Operational Shock
10. GPS Input : GPS time and location from external GPS receiver
IEC-60068-2-27 Other specification may be available upon request.
11. Power 24 VDC, 50W steady-state. Includes 120-230 VAC power supply
TELOPS NORTH AMERICA 100 – 2600 St-Jean - Baptiste Avenue, Quebec, QC, Canada G2E 6J5 Tel.: 418 864-7808 I Fax: 418 864 – 7843
TELOPS EUROPE 6 rue du Docteur Schweitzer, 91420, Morangis, France Tel.: +33 1 70 27 71 34
[email protected] I www.telops.com
© 2016 Telops. All rights reserved.
TEL-COMM-00092h
