Transcript
Category Lead-Free Soldering Stations
Search
Category Surface Mount Technology Lead-Free Soldering Stations Temperature Controlled Soldering Stations Ceramic Heater Soldering Irons Nichrome Heater Soldering Irons Special Purpose Soldering Irons Solder Pots/ PCB Assembly Aids Desoldering Soldering Accessories Heated Tools Hand Tools/ Tool Sets Replacement TIP
Product Specifications
Preheating is achieved as Nitrogen is output from the nozzle surrounding the heater pipe. Using Nitrogen reduces oxidization and improves solder wetting and fillet shape. NOTE Preheat effect cannot be achieved using the RX-802ASPH alone. A Nitrogen gas cylinder or Nitrogen generator (available separately) is also required. We recommend using the NC-100R N2 Station to control gas flow.
All-in-one N2 Nozzle Tips RX-80HRT series tips fitted with slim N2 nozzles. No need to select nozzles for individual tips.
Slim N2 Nozzles Ø6.4mm slim N2 nozzles. Get into small spaces easily.
Temperature Controlled Lead-free Soldering Station
Taiyo Electric Ind. Co., Ltd. is certified to comply to the regulations within the ISO9001 :2008, JIS Q 9001 :2008 set by the accreditation organisation Tüv Rheinland.
Light and easy to use Handpiece Handpiece weighs just 33g. So light it's hard to believe for a Nitrogen station! Flexible N2 Induction Tubing Extra-thin Ø1.8mm N2 induction tubing. Super-flexible that doesn't inhibit handling of handpiece. Special Tool to change tip easily RX-802ASPH comes with a special tool to change the tip easily even when it's hot. Improving lead-free soldering Advantages of the Preheat Effect •Allows soldering work to be done with a tip temperature similar to that for Eutectic solder (Sn-Pb), even though leadfree solder has a high melting point temperature. •Enables quicker soldering because there is minimal temperature fluctuation during soldering work. •Reduces solder splashing or damage caused by heat-shocks during soldering by preheating the components or the solder itself. Advantages of Preheating with Nitrogen •Reduces oxidization of the solder joint area and the tip. •Improves the solder wetting and fillet shape.
RX-802ASPH + NC100R Temperature Controlled Lead-free Soldering Station
Setup example RX-802ASPH+NC-100R A space-saving and efficient N2 system
Specifications MODEL
RX-852AS
Voltage
110V,120V,220V,230V,240V AC 50/60Hz
Power Consumption
80W
Soldering Unit Voltage/Consumption
24V 72W
Temperature Setting Range
50-450°C
Insulation Resistance(500V DC)
Over 100MΩ
Dimensions Weight
Soldering
158mm ( w/o cord bushing )
Control Unit
146(L) x 115(W) x 98(H) (mm)
Soldering
33g (w/o cord)
Control Unit
1.8kg(w/o cord)
Leak Voltage
Less than 2mV
Gound Resistance
Less than 2Ω
Control Unit to Soldering Unit Cord Lenth
1.2m
Gas Supply Pressure
0.2MPa(2kgf/cm2)
Power Cord Length
1.2m (3 core cord) ground plug
Accessories
Soldering Iron Stand, Tip Stand, Tip changing tool
Replacement Parts
Temperature Controlled Lead-free Soldering Station
N2 O-ring
Temperature Controlled Lead-free Soldering Station
RX-80PHP ST-20 Replacement sponge ST-53SP Tip/O-ring changing tool RX-80PHC Soldering Unit Hand Piece RX-80GASPH Tip Stand ST-20C
Copyright ©2011 TAIYO ELECTRIC IND.CO.,LTD. All rights reserved.
