Transcript
Soldering irons
Tough industrial soldering irons with Ersadur long−life soldering tips (30 times the working life of conventional copper soldering tips). Warm−up time 3 min. (for size 300, approx. 5 min.). Power cable 1.5 m rubber cable (PVC for size 30). With support stand (not size 30). Size 30 – Proven Ersa soldering iron with attachable support stand. Size 150 – Powerful soldering iron for copper cables up to 6 mm2 cross section. Size 300 – The most powerful soldering iron with scale-resistant soldering tip (not Ersadur tip). Its high power makes it particularly suitable for sheet metal working, soldering to copper busbars, heating up branding irons, and for making containers and bodywork.
08 2100_30
08 2100_80–150
Electrolytic copper Iron layer Nickel layer
Heating power
W
08 2100
04C
Multi-purpose soldering iron Soldering tip width Heating power Soldering tip temperature after 3 minutes suitable for copper cross sections up to Weight without power lead
mm W °C mm2 g
30 XXX 3.1 30 380 2.5 80
80 XXX 4.8 80 410 4 220
150 XXX 5.3 150 450 6 245
300 XXX 25 300 470 – 870
Soldering layer
08 2100_300
Multi-purpose soldering iron with temperature control Powerful general-purpose soldering iron with a precisely regulated temperature sensor located directly below the internally heated soldering tip. The combination of this direct temperature measurement with the precise control electronics integrated in the handle enables the most delicate soldering jobs to be professionally done on sensitive electronic components and also applications with very high thermal requirements. Application: For mobile use in the field of service, maintenance and repairs. The ERSA Multi-TC has the functionality of a large soldering station, but no galvanic separation.
04C
Heating power
08 2150
W Universal soldering iron Multi-TC with temperature control
Heating power Warm-up time Heating power Control range of soldering tip temperature Weight without power lead
75
Warm-up time 34 sec.
XXX W s W °C g
285 approx. 34 75 250 - 450 60
08 2150_75
Quick soldering iron Unusually light soldering gun without transformer; with PTC heating element. Warm-up time approx. 20 sec. Periodic pressing of the trigger allows heat output to be matched to the heat requirements of the joint. High efficiency internally heated soldering tip. Power cable 1.5 m. Application: Particularly useful for assembly and repair work, because of its working range of 15 − 100 W (used as standard soldering iron). Warm-up time 20 sec.
960ED
04C
ERSA Type
08 2200
Quick soldering iron Multi-Sprint
Soldering tip width Heating power Heating power Soldering tip temperature after 3 minutes Weight without power lead
XXX mm W W °C g
3.2 150 75 350 100
08 2200_960ED
