Transcript
HE-Inv-8
HE-Inv-12 HE-Inv-25
Heating Element with PT100 Sensor for MEA1060-Inv and MEA1060-Inv-BC Amplifiers (The number in the product name 8, 12 and 25 defines the diameter of the bore hole in the middle of the amplifier for the invert microscope).
Heating Element
Back side
Front side
For installation you need the heating element HE-Inv-8 (or HE-Inv-12 or HE-Inv-25) and 8 provided screws.
Installation:
!
1.
Turn the ground plate of MEA1060-Inv (or MEA1060-Inv-BC) amplifier upside down.
2.
Mount the heating element carefully with back side up and with all 8 srews onto the ground plate of the MEA amplifier.
3.
Connect the plug socket of the heating element and save the cable at the rim of the amplifier’ s ground plate with 2 screws.
Warning: The device may only be used together with the MEA1060-Inv and MEA1060-Inv-BC from Multi Channel Systems MCS GmbH, and only for the specified purpose. Damage of the device and even injuries can result from improper use. Scope of delivery: 1 HE-Inv-8 8 srews (M3 x 5)
Multi Channel Systems MCS GmbH Aspenhaustrasse 21 72770 Reutlingen Germany
OR: 1 HE-Inv-12
OR: 1 HE-Inv-25
Fon +49-7121-9 09 25- 0 Fax +49-7121-9 09 25-11
© 2011 Multi Channel Systems MCS GmbH
[email protected] www.multichannelsystems.com
Product information is subject to change without notice.
