Transcript
For whichever road you’re driving © copyright Radar Direct 2015
The Beltronics Vector 940i is the perfect international detector for those enthusiasts that require exacting performance at an affordable price. Tuned for
The new V940i includes selectable REDFLEX Camera band preferences, expanded K-band Detection sweep, K-Pulse detection, and Hyper-K detection for low-power K-band pulsed sources. Front and rear laser detection and Safety Warning are standard features. The V940i also features Digital Signal Processing (DSP) which virtually eliminate false alerts. Plus, with our patented Mute and AutoMute, varactor-tuned (VTO) microwave receiver, audible and visual band alerts, the V940i has all the performance you’d expect from Beltronics.
Features
Specifications
Voice Alerts The V940 provides digital voice announcements of radar and laser bands detected. If Safety Radar (SWS) is turned on, a safety radar message will also be announced. Highway/City sensitivity The City button selects the V940’s sensitivity mode. We recommend the Highway mode for most driving. When driving in urban areas where annoying X-band intrusion alarms and door openers are common, City mode can be engaged to lower X-band sensitivity and reduce X-band alerts. Full sensitivity is maintained on all other bands. AutoMute Our patented AutoMute feature alerts you to a radar encounter at the volume you have selected, then the AutoMute feature will automatically reduce the volume to a lower level. This keeps you informed without the annoyance of a continuous fullvolume alert.
Mute The Mute button, located on the V940’s top case,allows you to silence the audio alert during a radar encounter. To mute the audio for a single specific signal,briefly press the Mute button. After that radar encounter has passed,the mute will automatically reset and the audio will alert you to the next encounter.
Radar Receiver Digital Signal Processing (DSP) Programmable Features Power-On Indication Voice Alerts Power-On Sequence AutoMute City Mode Sensitivity Bands (POP & SWS only)
Brightness levels and Dark Mode The BRT button selects the brightness of your V940’s display. There are four settings: Maximum, Medium, Minimum, and Dark. When you select Dark mode, your V940 changes to a very inconspicuous power-on indication and the display will not show visual alerts when V940 detects signals. Only the audible alert will tell you of detected signals.
Sensitivity Control Highway City
Comes Fully Equipped Vector 940 comes complete with a quick-release windshield mount and a coiled power cord.
Power Requirement 12VDC, Negative Ground
RadarDirect
Phone 0800 472 327
Operating Bands X-band: 10.525 GHz ± 25 MHz K-band: 23.950 GHz to 24.250GHz (Unique NZ Specification) Ka-Super Wideband: 33.400 GHz to 36.110Ghz Laser: 904nm, 33MHz bandwidth
[email protected]
www.
Laser Detection Quantum Limited Video Receiver Multiple Laser Diodes
Display Type 280 LED Alphanumeric Bar Graph 3-Level dimming, plus Dark Mode Additional Patented Technology Auto Calibration Circuitry VG2 Immunity
Dimensions 120mm (l) x 70mm (w) x 32mm (h)
RadarDirect.co.nz
