Transcript
LED light engine / OLED OLED
OLED Evaluation Kit LUREON REP 10-40 DC 2 LUREON REP
Product description • Evaluation kit consists of LUREON REP module and preconfigured LCCI 016/350 converter • Typ. forward current 230 mA • High efficiency > 50 lm/W • Colour temperature 4,000 K • High colour rendering index (CRI > 85) • Homogeneous, non-glare and wide-area lighting • Neutral white light • High specific light distribution of 12,000 lm/m² • Extremely flat design (< 3 mm) • White diffuse surfaces
99
• Connection with plug contact
89
3
Technical data Rated supply voltage
220 – 240 V
Beam characteristic
120°
Ambient temperature ta
0 ... +40 °C
Typ. tp point LUREON REP
40 °C
tp
Risk group (EN 62471:2008)
0
Protection class
2 / SELV
31
Max. casing temperature tc LCCI 016/350 75 °C
49
Order data Type
Article number
Colour temperature2
Packaging, carton
Weight per pc.
LUREON EVAL 2
28000253
4,000 K
1 pc(s).
0.600 kg
Spezific technical data Type
OLEDmodule LUREON REP 10-40 DC 2
Typ. luminous flux1
Forward current1 2
Supply voltage1
Typ. power1
Colour rendering index CRI1 3
840/4x7
73 lm
230 mA
6.1 V
1.4 W
> 85
840/4x7
76 lm
250 mA
6.2 V
1.5 W
> 85
840/4x7
105 lm
350 mA
6.5 V
2.1 W
> 85
Photometric code
All data for tp = 25 °C. 1
Tolerance range for optical and electrical data ±15 %.
2
For the valid current range, please refer to the diagram on page 4. Exceeding the max. operating current leads to an overload of the module. This may result in a significant reduction in lifetime or even in destruction.
3
Colour temperature and tolerances according to CIE 1931
Data sheet 03/13-OLED013-0 Subject to change without notice.
www.tridonic.com
1
LED light engine / OLED OLED
Safety instructions Please follow this instructions to ensure safety and a proper operation. • This product is for evaluation porposes only. Do not sell it to third party customers. • The evaluation kit is made for indoor use only. Use the product only in safe, noncritical environments (e.g. laboratories) under supervision. • Operate the module only with the provided control gear. • Do not operate on easily flammable materials. • Do not use in dust, combustible gases and vapours, solvents and powerful electrostatic fields. • Avoid mechanical stress. This can harm the OLED module and the glass may break. • Do not use the evaluation kit in suspicion of physical or electrical damage. • Use within the permitted ambient temperature range. The module is self cooling (no heat sink required). • Prevent the components from water, moisture and excessive humidity. Do not use if condensation occures.
EOS/ESD safety guidelines The device / module contains components that are sensitive to electrostatic discharge and may only be installed in the factory and on site if appropriate EOS/ESD protection measures have been taken. No special measures need be taken for devices/modules with enclosed casings (contact with the pc board not possible), just normal installation practice. Please note the requirements set out in the document EOS / ESD guidelines (Guideline_EOS_ESD.pdf) at: http://www.tridonic.com/com/en/technical-docs.asp
Wiring diagram – ADJ + ADJ – +
52.3 kΩ
– LED + LED
Uconverter LCCI 016/350
OLEDmodule LUREON REP 10-40 DC/DL 2
Mains plug
For further technical information see data sheet OLED001, OLEDmodule LUREON REP 10-40 DC/DL 2.
Data sheet 03/13-OLED013-0 Subject to change without notice.
www.tridonic.com
2
