Transcript
DA-LM1100 INSTALLATION MANUAL This manual is intended for users of the DA-LM1100 pole mounting bracket. It includes instructions for mounting the DA-LM1100 pole mounting bracket to a pole. • This bracket is intended to be used with DC-S series model of cameras. Do not use it with other models of cameras. • This installation should be performed by a qualified service personnel in conformance to all local codes. • You may need to reinforce the pole. If the pole is not strong enough to support the camera, the camera may fall. • Do not use this product for other purposes.
Mounting Mount the bracket to the pole as follows:
1
Mount the bracket 1 to the pole. Fasten the bracket 1 to the pole by adjusting the strap length. You can adjust the strap length by tightening or loosening the clamp screw.
Pole DIA. 76~230mm (2.99~9.06”)
Strap [Length max. 750mm (29.53”)]
Bracket 1
2
Mount the bracket 2 to the bracket 1. Bracket 1 Bracket 2
Pole Clamp Screw
Connect your camera to the bracket as follows:
3
Insert cables from external devices, network and power adapter into the bracket 2.
4
Connect the camera to the bracket 2 by turning the universal nut.
Bracket 2 Universal Nut
Do not turn the camera but turn the universal nut when connecting the camera to the bracket 2, otherwise, the cable will be twisted.
5
Cable
Camera
Turn on power.
Dimensions Unit: mm (inch) 136 (5.35) ± 2.0 (0.08)
116 (4.57)
156 (6.14)
50 (1.97)
90 (3.54)
72 (2.83) ± 2.0 (0.08)
IDIS Co., Ltd. For more information, please visit www.idisglobal.com
)
.93
9 (1
Ø4
M10 x 1.5 (0.06)
Ver.1.0
